IEC 62087-7:20 18规定了计算机显示器功耗的确定，包括但不限于采用CRT、LCD、PDP或OLED技术的显示器。包括触摸屏功能的计算机显示器包括在本文档的范围内。本文档仅限于由电池以外的主电源供电的计算机显示器。本文档不包括由电池供电的计算机显示器。然而，市电供电的计算机监视器可以包括任何数量的辅助电池。 本文档考虑了通过数字输入（如DisplayPort、HDMI、DVI）或模拟VGA输入连接的计算机显示器。本文档不适用于网络和无线连接的计算机显示器。 计算机监视器是一种不包括电视调谐器的显示设备，旨在用于显示来自计算机的视频信号。这些视频信号由在计算机内运行的软件程序产生，并且可以由静态和动态图像组成。因此，规定了使用静态模式、动态视频和基于网络的视频的测试过程。 本文件中规定的测试方法适用于任何尺寸的计算机显示器，但是，本文件不适用于与医疗设备、出版和其他专业、商业或工业用途相关的专用显示器。 还定义了与测量功耗相关的各种操作模式。 本文件中的测量条件代表设备的正常使用，可能与特定条件不同，例如安全标准中规定的条件。

IEC 62087-7:2018 specifies the determination of the power consumption of computer monitors including, but is not limited to, those with CRT, LCD, PDP or OLED technologies. Computer monitors that include touch screen functionality are included in the scope of this document. This document is limited to computer monitors that are powered from a main power source other than a battery. Computer monitors that are powered from a battery source are not covered by this document. However mains-powered computer monitors may include any number of auxiliary batteries.
Computer monitors connected by digital inputs such as DisplayPort, HDMI, DVI, or by analogue VGA input, are considered in this document. This document does not apply to network- and wirelessly connected computer monitors.
A computer monitor is a display device that does not include a TV tuner and is intended to be used to display the video signals from a computer. These video signals are produced from software programs that are operating within the computer and can consist of static and moving images. As such, test procedures using static patterns, dynamic video and web-based video are specified.
The test methods specified in this document can be applied to computer monitors of any size, however, this document is not applicable to specialized monitors associated with medical equipment, publishing and other professional, commercial or industrial uses.
The various modes of operation that are relevant for measuring power consumption are also defined.
The measuring conditions in this document represent the normal use of the equipment and can differ from specific conditions, for example as specified in safety standards.