首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 ISO 6952:1994
到馆阅读
收藏跟踪
购买正版
Fluid power systems and components — Two-pin electrical plug connectors with earth contact — Characteristics and requirements 流体动力系统和部件——带接地触点的双针电气插头——特点和要求
发布日期: 1994-09-01
取消并替换第一版(1989年)。规定了与单个电磁阀一起使用的带接地触点的通用双针电气插头连接器的以下特性和要求:连接器的电气特性;引脚和接地触点的尺寸;将插座固定至插头的方法;插头和插座之间的密封程序;使用要求。本文规定的电气插头连接器适用于外部作用不会损坏连接器的工作条件。
Cancels and replaces the first edition (1989). Specifies the following characteristics and requirements for a general purpose two-pin electrical plug connector with earth contact for use with a single solenoid: the electrical characteristics of the connector; the dimensions of the pins and earth contact; the means for fixing the socket to the plug; the sealing procedure between the plug and the socket; usage requirements. The electrical plug connector specified herein is intended to be used under working conditions where the connector cannot be damaged by external action.
分类信息
关联关系
研制信息
归口单位: ISO/TC 131/SC 5
相似标准/计划/法规
现行
ISO 4400-1994
Fluid power systems and components — Three-pin electrical plug connectors with earth contact — Characteristics and requirements
流体动力系统和部件——带接地触点的三针电气插头——特点和要求
1994-09-01
现行
BS 6361-1988
Specification for three-pin plug connectors for electrically controlled fluid power equipment
电控流体动力设备用三针插头连接器规范
1988-08-31
现行
NFPA(Fluid) T3.5.29 R1-2007(R2012)
Fluid Power Systems and Components - Electrically-Controlled Industrial Valves - Interface Dimensions for Electrical Connectors
流体动力系统和部件.电控工业阀门.电气连接器的接口尺寸
2007-02-16
现行
BS ISO 15217-2000
Fluid power systems and components. 16mm square electrical connector with earth contact. Characteristics and requirements
流体动力系统和部件 带接地触点的16mm方形电气连接器 特点和要求
2001-01-15
现行
ISO 15217-2000
Fluid power systems and components — 16 mm square electrical connector with earth contact — Characteristics and requirements
流体动力系统和部件——带接地触点的16 mm方形电气连接器——特点和要求
2000-11-23
现行
ISO 20401-2017
Pneumatic fluid power systems — Directional control valves — Specification of pin assignment for 8 mm and 12 mm diameter electrical round connectors
气动流体动力系统 - 方向控制阀 - 直径8 mm和12 mm的电气圆形连接器的针脚分配规范
2017-08-02
现行
BS ISO 20401-2017
Pneumatic fluid power systems. Directional control valves. Specification of pin assignment for 8 mm and 12 mm diameter electrical round connectors
气动流体动力系统 方向控制阀 直径为8mm和12mm的圆形电连接器的引脚分配规范
2017-08-09
现行
DIN ISO 20401
Pneumatic fluid power systems - Directional control valves - Specification of pin assignment for electrical round connectors of diameters 8 mm and 12 mm (ISO 20401:2005 + Cor. 1:2005)
气压传动系统.方向控制阀.直径为8mm和12mm的圆形电连接器的插销分配规范(ISO 20401-2005+Cor.1-2005)
2007-07-01