首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 BS 2782-4:METHODS 451F TO 451J:1978
到馆提醒
收藏跟踪
购买正版
Methods of testing plastics. Chemical properties-Determination of formaldehyde in phenolic mouldings (colorimetric method). Determination of formaldehyde in phenolic mouldings (gravimetric method). Determination of sulphates in phenolic mouldings. Determination of chlorides in phenolic mouldings 塑料的试验方法 化学性质
发布日期: 1978-02-28
交叉引用:BS 410BS 612BS 700BS 1583BS 1752BS 2782:简介BS 3591BS 3978BS 4123工作健康和安全等。法案1974取代了BS 2782:1970的方法402C、402D、402E、402F。
Cross References:BS 410BS 612BS 700BS 1583BS 1752BS 2782:IntroductionBS 3591BS 3978BS 4123Health and Safety at Work etc. Act 1974Replaces methods 402C, 402D, 402E, 402F of BS 2782:1970.
分类信息
发布单位或类别: 英国-英国标准学会
关联关系
研制信息
相似标准/计划/法规
现行
BS 2782-4-METHOD 470B-1999
Methods of testing plastics. Chemical properties-Determination of ash of polyalkylene terephthalates
塑料的试验方法 化学性质 聚对苯二甲酸乙二醇酯灰分的测定
1999-04-15
现行
BS 2782-4-METHOD 470C-1991
Methods of testing plastics. Chemical properties-Determination of ash of unplasticized cellulose acetate
塑料的试验方法 化学性质 未增塑醋酸纤维素灰分的测定
1991-04-30
现行
BS 2782-4-METHOD 434D-1975
Methods of testing plastics. Chemical properties-Determination of antioxidants in polyolefin compounds by a spectrophotometric method
塑料的试验方法 化学性质 分光光度法测定聚烯烃化合物中的抗氧化剂
1975-02-15
现行
BS 2782-4-METHOD 451A-1978
Methods of testing plastics. Chemical properties-Determination of acetone-soluble matter in phenolic mouldings
塑料的试验方法 化学性质 酚醛模塑件中丙酮可溶物的测定
1978-05-31
现行
BS 2782-4-METHOD 452B-1993
Methods of testing plastics. Chemical properties-Determination of carbon black content of polyolefin compound
塑料的试验方法 化学性质
1993-01-15
现行
BS 2782-4-METHOD 433A-1979
Methods of testing plastics. Chemical properties-Determination of inorganic chlorine in epoxide resins and glycidyl esters
塑料的试验方法 化学性质 环氧树脂和缩水甘油酯中无机氯的测定
1979-06-29
现行
BS 2782-4-METHOD 432D-1995
Methods of testing plastics. Chemical properties-Determination of styrene evaporation from unsaturated polyester resins
塑料的试验方法 化学性质
1995-08-15
现行
BS 2782-6-METHOD 640A-1979
Methods of testing plastics. Dimensional properties-Determination of shrinkage of test specimens in the form of bars of compression moulded thermosetting moulding materials
塑料的试验方法 维度属性 热固性模压材料棒材试样收缩率的测定
1979-08-31
现行
BS 2782-10-METHOD 1003-1977
Methods of testing plastics. Glass reinforced plastics-Determination of tensile properties
塑料的试验方法 玻璃增强塑料 拉伸性能的测定
1977-08-31
现行
BS 2782-4-METHOD 452C-1979
Methods of testing plastics. Chemical properties-Determination of butyl rubber content of low density polyethylene compounds
塑料的试验方法 化学性质 低密度聚乙烯化合物中丁基橡胶含量的测定
1979-06-29
现行
BS 2782-7-METHOD 740C-1996
Methods of testing plastics. Rheological properties-Polymer dispersions. Determination of white point temperature and minimum film-forming temperature
塑料的试验方法 流变特性 聚合物分散体 白点温度和最低成膜温度的测定
1996-07-15
现行
BS 2782-4-METHOD 432A-1991
Methods of testing plastics. Chemical properties-Determination of residual styrene monomer content in reinforced plastics based on unsaturated polyester resins
塑料的试验方法 化学性质 不饱和聚酯树脂增强塑料中残留苯乙烯单体含量的测定
1991-08-30
现行
BS 2782-4 METHOD 452B-1993
Methods of Testing Plastics - Part 4: Chemical Properties - Method 452B: Determination of Carbon Black Content of Polyolefin Compound
塑料试验方法第4部分:化学性能方法452B:聚烯烃化合物中炭黑含量的测定
1993-01-01
现行
BS 2782-8-METHOD 826A-1992
Methods of testing plastics. Other properties-Determination of adhesion of print on plastics sheet
塑料的试验方法 其他财产
1992-11-15
现行
BS 2782-4-METHOD 434B-1977
Methods of testing plastics. Chemical properties-Determination of antioxidants in polyolefin compounds by ultra-violet absorption of the chloroform extract
塑料的试验方法 化学性质 氯仿提取物紫外吸收法测定聚烯烃化合物中的抗氧化剂
1977-09-30
现行
BS 2782-4-METHOD 454G-1996
Methods of testing plastics. Chemical properties-Polymer dispersions. Determination of sieve residue (gross particle and coagulum content)
塑料的试验方法 化学性质 聚合物分散体 筛余物(总颗粒和凝结物含量)的测定
1996-10-15
现行
BS 2782-4-METHOD 451B-1978
Methods of testing plastics. Chemical properties-Determination of acetone-soluble matter in phenolic moulding materials after moulding
塑料的试验方法 化学性质 酚醛模塑材料模塑后丙酮可溶物的测定
1978-05-31
现行
BS 2782-10-METHOD 1005-1977
Methods of testing plastics. Glass reinforced plastics-Determination of flexural properties. Three point method
塑料的试验方法 玻璃增强塑料 弯曲性能的测定 三点法
1977-08-31
现行
BS 2782-3-METHOD 365A-1976
Methods of testing plastics. Mechanical properties-Determination of softness number of flexible plastics materials
塑料的试验方法 机械性能 软塑料材料柔软度值的测定
1976-09-30
现行
KS M ISO 175(2021 Confirm)
플라스틱-액체 화학약품 내에서 침지 효과의 측정 방법
塑料-液体化学品浸泡效果测定的试验方法
2016-12-27