AWS B2.1-1-203:2019-1/8至3/4“厚E6010（垂直上坡）焊态碳钢（M-1/P-1/S-1 第1组或第2组）的保护金属极电弧焊标准焊接工艺规范主要用于管道应用-国家数字标准馆

现行 AWS B2.1-1-203:2019

到馆阅读

收藏跟踪

购买正版

Standard Welding Procedure Specification for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 3/4" Thick, E6010 (Vertical Uphill), As-Welded Condition, Primarily Pipe Applications 1/8至3/4“厚E6010（垂直上坡）焊态碳钢（M-1/P-1/S-1 第1组或第2组）的保护金属极电弧焊标准焊接工艺规范主要用于管道应用

发布日期： 2019-03-01

                AWS B2。1-1-203:2019包含厚度范围为1/8英寸[3 mm]到3/4英寸[19 mm]的碳钢的基本焊接变量，使用E6010（垂直上坡）手动保护金属极电弧焊。它引用了制作焊件所需的母材和操作条件、填充金属规范以及角焊缝和坡口焊缝的允许接头设计。该SWPS主要用于管道应用。

AWS B2.1-1-203:2019 contains the essential welding variables for carbon steel in the thickness range of 1/8 inch [3 mm] through 3/4 inch [19 mm], using manual shielded metal arc welding with E6010 (vertical uphill). It cites the base metals and operating conditions necessary to make the weldment, the filler metal specifications, and the allowable joint designs for fillet and groove welds. This SWPS was developed primarily for pipe applications.

分类信息

发布单位或类别：美国-美国焊接协会

关联关系

研制信息

相似标准/计划/法规

AWS B2.1.011-91

Standard Welding Procedure Specification for Shielded Metal Arc Welding of Galvanized Steel, 10 through 18 Gauge, in the As-Welded Condition, With of Without Backing
无背衬焊态10至18号镀锌钢的保护金属极电弧焊标准焊接工艺规范

1A1W1S1 Archive Product 133

Standard Welding Procedure Specification (Swps) for Shielded Metal Arc Welding of Galvanized Steel (M-1), 10 through 18 Gauge, in the As-Welded Condition, with or without Backing
焊接状态下10至18号镀锌钢（M-1）带或不带衬垫的保护金属极电弧焊标准焊接工艺规范（Swps）

AWS B2.1.012-91

Standard Welding Procedure Specification for Shielded Metal Arc Welding of Carbon Steel, (M-1, Group 1), 10 through 18 Gauge, in the As-Welded Condition, With or Without Backing
焊接状态下带或不带衬垫的10至18号规格碳钢（M-1 第1组）的保护金属极电弧焊的标准焊接工艺规范

AWS B2.1.013-91

Standard Welding Procedure Specification for Shielded Metal Arc Welding of Austenitic Stainless Steel, (M-8 or P-8), 10 through 18 Gauge, in the As-Welded Condition, With or Without Backing
焊接状态下10至18号奥氏体不锈钢（M-8或P-8）带或不带衬垫的保护金属极电弧焊的标准焊接工艺规范

AWS B2.1.001-90

Standard Welding Procedure Specification for Shielded Metal Arc Welding of Carbon Steel, (M-1/P-1, Group 1 or 2), 3/16 through 3/4 inch, in the as-Welded Condition, With Backing
3/16至3/4英寸碳钢（M-1/P-1 第1组或第2组）在焊接状态下带衬垫的保护金属极电弧焊的标准焊接工艺规范

1A1W1S1 Archive Product 37

Standard Welding Procedure Specification for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 inch Thick, As-Welded Condition
焊接状态下1/8至1-1/2英寸厚的奥氏体不锈钢（M-8/P-8/S-8 第1组）的气体保护钨极电弧焊后的标准焊接工艺规范

AWS B2.1.014-91

Standard Welding Procedure Specification for Shielded Metal Arc Welding of Carbon Steel to Austenitic Stainless Steel, (M-1 to M-8 or P-8)10 through 18 Gauge, in the As-Welded Condition, With or Without Backing
焊接状态下带或不带衬垫的碳钢与奥氏体不锈钢（M-1至M-8或P-8）10至18 Gauge的保护金属极电弧焊的标准焊接工艺规范

1A1W1S1 Archive Product 408

STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR SHIELDED METAL ARC WELDING OF CARBON STEEL, (M-1/P-1, GROUP 1 OR 2), 3/16 THROUGH 3/4 INCH, IN THE AS WELDED CONDITIONS WITH BACKING
3/16至3/4英寸碳钢（M-1/P-1 第1组或第2组）在带衬垫的焊态条件下的保护金属极电弧焊标准焊接工艺规范（WPS）

AWS B2.1-1-012-2002(R2013)

Standard Welding Procedure Specification (Swps) for Shielded Metal Arc Welding of Carbon Steel (M-1, P-1, or S-1 to M-1, P-1, or S-1), 10 through 18 Gauge, in the As-Welded Condition, with or without Backing
焊接状态下10至18 Gauge碳钢（M-1、P-1或S-1至M-1、P-1或S-1）带或不带衬垫的保护金属极电弧焊标准焊接工艺规范（Swps）

1A1W1S1 B2.1.004-90

Standard Welding Procedure Specification for Gas Metal Arc Welding of Carbon Steel (M-1, Group 1), 10 through 18 Gauge, in the As-Welded Condition, With or Without Backing
焊接状态下10至18号规格碳钢（M-1 第1组）带或不带衬垫的气体保护金属极电弧焊的标准焊接工艺规范

DIN 8563-125-DRAFT

Draft Document - Quality assurance of welded structures - Specification and approval of welding procedures for metallic materials - Part 125: Welding procedure tests for the arc welding of aluminium castings and combinations of cast to wrought material (Proposal for a European standard)
文件草案.焊接结构的质量保证.金属材料焊接程序的规范和批准.第125部分:铝铸件和铸造与锻造材料组合的电弧焊焊接程序试验（欧洲标准提案）

AWS B2.1-1/8-014-2002(R2013)

Standard Welding Procedure Specification (Swps) for Shielded Metal Arc Welding of Carbon Steel to Austenitic Stainless Steel (M-1 to M-8/P-8/S-8, Group 1), 10 through 18 Gauge, in the As-Welded Condition, with or without Backing
焊接状态下带或不带衬垫的10至18 Gauge碳钢至奥氏体不锈钢（M-1至M-8/P-8/S-8 第1组）的保护金属极电弧焊标准焊接工艺规范（Swps）

AWS B2.1-1-233-2006

Standard Welding Procedure Specification (Swps) for Argon Plus 25% Carbon Dioxide Shielded Gas Metal Arc Welding (Short Circuting Transfer Mode) followed by Argon Plus 2% Oxygen Shielded Gas Metal Arc Welding (Spray Transfer Mode) of Carbon Steel (M-1/P-1/S-1) Groups 1 and 2, 1/8 through 1-1/2 inch
碳钢（M-1/P-1/S-1）组1和2、1/8至1-1/2英寸的氩加25%二氧化碳气体保护金属极弧焊（短路过渡模式）和氩加2%氧气保护气体保护金属极弧焊（喷射过渡模式）的标准焊接工艺规范（Swps）

AWS B2.1-8-213-1997(R2012)

Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 in. Thick, ER3XX-XX, As-Welded Condition, Primarily Pipe Applications
1/8至1-1/2英寸奥氏体不锈钢（M-8/P-8/S-8 第1组）的保护金属极电弧焊标准焊接工艺规范（WPS）厚 ER3XX-XX 焊接状态主要用于管道应用

1A1W1S1 Archive Product 180

Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-4/P-4, Group 1 or 2), 1/8 through 1/2 in. Thick, As-Welded Condition, As-Welded Condition, 1/8 through 1-1/2 in. Thick, PWHT Condition, ER80S-B2 and E801
1/8至1/2英寸铬钼钢（M-4/P-4 第1组或第2组）的气体保护钨极电弧焊后的标准焊接工艺规范（WPS）厚度焊接状态焊接状态 1/8至1-1/2英寸厚度焊后热处理条件 ER80S-B2和E801

AWS B2.1-8-214-2001(R2012)

Standard Welding Procedure Spec (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 in. Thick, ER3XX, ER3XX-XX, As-Welded Condition, Primarily Pipe Applications
1/8至1-1/2英寸奥氏体不锈钢（M-8/P-8/S-8 第1组）的气体保护钨极电弧焊后的标准焊接工艺规范（WPS）厚 ER3XX ER3XX-XX 焊接状态主要用于管道应用

AWS B2.1-5A-224-1999(R2009)

Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-5A/P-5A), 1/8 through 1/2 in. Thick, As-Welded Condition; 1/8 through 1-1/2 in. Thick, PWHT Condition, ER90S-B3 and E9018-B3, Primarily Pipe Applic
1/8至1/2英寸铬钼钢（M-5A/P-5A）的气体保护钨极电弧焊后的标准焊接工艺规范（SWPS）厚如焊接状态；1/8至1-1/2英寸厚度焊后热处理条件 ER90S-B3和E9018-B3 主要用于管道应用

AWS B2.1-5A-226-1999(R2009)

Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding (Consumable Insert Root) followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-5A/P-5A), 1/8 through 1/2 in. Thick, As-Welded Condition; 1/8 through 1-1/2 in. Thick, PWHT Condition, IN521, ER90S-B3, and E9
1/8至1/2英寸铬钼钢（M-5A/P-5A）的气体保护钨极电弧焊（自耗镶块根部）和金属保护电弧焊的标准焊接工艺规范（SWPS）厚如焊接状态；1/8至1-1/2英寸厚度、焊后热处理条件、IN521、ER90S-B3和E9

1A1W1S1 Archive Product 127

Standard Welding Procedure Specification (Swps) for Gas Metal Arc Welding (Short Circuiting Transfer Mode) of Galvanized Steel (M-1), 18 through 10 Gauge, in the As-Welded Condition, with or without Backing
焊接状态下18至10号镀锌钢（M-1）气体保护金属极电弧焊（短路过渡模式）的标准焊接工艺规范（Swps）带或不带衬垫

AWS B2.1-1/8-229-2002-AMD1(R2013)

STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR GAS TUNGSTEN ARC WELDING FOLLOWED BY SHIELDED METAL ARC WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUPS 1 OR 2) TO AUSTENITIC STAINLESS STEEL (M-8/P-8/S-8, GROUP 1), 1/8 THROUGH 1-1/2 INCH
碳钢（M-1/P-1/S-1 第1组或第2组）与奥氏体不锈钢（M-8/P-8/S-8 第1组） 1/8至1-1/2英寸的气体保护金属极电弧焊后的钨极气体保护焊标准焊接工艺规范（SWPS）

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

关于我们

查新颖性

查有效性

跟踪标准

比对标准

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统