液压滤芯 第3部分：抗压溃（破裂）特性检验方法
Hydraulic fluid power - Filter elements - Part 3：Verification of collapse/burst pressure rating

2011-01-14

液压传动 金属承压壳体的疲劳压力试验 第1部分：试验方法
Hydraulic fluid power—Fatigue pressure testing of metal pressure-containing envelopes—Part 1: Test method

2021-03-09

Hydraulic fluid power — Fatigue pressure testing of metal pressure-containing envelopes — Part 1: Test method
液压流体动力气压金属保持部血压试验 - 第1部分:试验方法

2015-07-21

液压传动连接 测压接头 第1部分：非带压连接式
Connections for hydraulic fluid power—Couplings for diagnostic purposes—Part 1: Coupling not for connection under pressure

2022-10-12

液压马达特性的测定 第1部分：在恒低速和恒压力下
Hydraulic fluid power―Determination of characteristics of motors―Part 1: At constant low speed and at constant pressure

2006-08-22

Hydraulic fluid power — Determination of characteristics of motors — Part 1: At constant low speed and constant pressure
液压流体动力——恒定低速和恒定压力下motorsPart 1特性的测定

2002-03-07

液压传动 系统和元件中压力波动的测定方法 第1部分：液压泵（精密法）
Hydraulic fluid power—Determination method of pressure ripple levels generated in systems and components—Part 1:Hydraulic pumps(precise method)

2022-10-12

유압 유체 동력－시스템 및 요소에서 발생하는 압력 리플 레벨의 결정－제1부 펌프에 대한 정밀 측정 방법
液压传动系统和部件中产生的压力脉动级的测定第1部分:泵的精密法

2002-11-26

유압 유체 동력－시스템 및 요소에서 발생하는 압력 리플 레벨의 결정－제1부 펌프에 대한 정밀 측정 방법
液压传动系统和部件中产生的压力波动水平的测定第1部分:泵的精密方法

2002-11-26

Connections for fluid power and general use — Hydraulic couplings for diagnostic purposes — Part 1: Coupling not for connection under pressure
流体动力和一般用途的连接——诊断用液压联轴器第1部分:不用于压力下连接的联轴器

1999-07-08

Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Part 1: Coupling not for connection under pressure (ISO 15171-1:1999)
流体动力和通用连接件诊断用液压联轴器第1部分:非压力连接用联轴器

2004-05-01

Pneumatic fluid power — Compressed air pressure regulators and filter-regulators — Part 1: Main characteristics to include in supplier's literature and product-marking requirements
气动流体动力.压缩空气压力调节器和过滤调节器.第1部分:包括在供应商文献和产品标记要求中的主要特性

2024-01-08

Pneumatic fluid power -- Compressed air pressure regulators and filter-regulators -- Part 1: Main characteristics to be included in literature from suppliers and product-making requirements
气动流体动力压缩空气压力调节器和过滤调节器第1部分:供应商提供的文献中包含的主要特性和产品制造要求

2003-01-01

气动 减压阀和过滤减压阀 第1部分：商务文件中应包含的主要特性和产品标识要求
Pneumatic fluid power—Compressed air pressure regulators and filter-regulators—Part 1:Main characteristics to be included in literature from suppliers and product-marking requirements

2021-08-20

Hydraulic fluid power — Determination of pressure ripple levels generated in systems and components — Part 1: Method for determining source flow ripple and source impedance of pumps
液压流体动力 - 确定系统和组件中产生的压力波动水平 - 第1部分:确定泵的源流动波动和源阻抗的方法

2015-09-29

유압 유체 동력－스플릿 또는 일체형 플랜지 클램프와 미터계 또는 인치계 나사를 가진 플랜지 연결기－제1부：3.5 MPa∼35 MPa, DN13∼DN127의 압력에서 사용하는 플랜지 연결기
液压传动带分体式或整体式法兰夹和公制或英制螺钉的法兰连接器第1部分:压力为3.5MPa至35MPa DN13至DN127的法兰连接器

2004-12-21

Hydraulic fluid power - Flange connectors with split or one-piece flange clamps and metric or inch screws - Part 1: Flange connectors for use at pressures of 3.5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 (ISO 6162-1:2002 + Cor. 1:2004)
液压传动.带分体式或整体式法兰夹和公制或英制螺钉的法兰连接器.第1部分:在3.5MPa（35bar）至35MPa（350bar）压力下使用的法兰连接器 DN 13至DN 127（ISO 6162-1-2002+Cor.1-2004）

2006-02-01

Draft Document - Hydraulic fluid power - Flange connectors with split or one-piece flange clamps and metric or inch screws - Part 1: Flange connectors for use at pressures of 3.5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 (ISO 6162-1:2002)
文件草稿.液压传动.带分体式或整体式法兰夹和公制或英制螺钉的法兰连接器.第1部分:在3.5 MPa（35巴）至35 MPa（350巴）、DN 13至DN 127压力下使用的法兰连接器（ISO 6162-1-2002）

2004-12-01

Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 1: Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127
液压流体动力——带分体式或一体式法兰夹和公制或英制螺钉的法兰连接件第1部分:压力为3.5 MPa（35 bar）至35 MPa（350 bar）、DN 13至DN 127的法兰接头、端口和安装面

2012-12-14