1.1本试验方法包括测定薄垫片材料、成型垫片以及在某些情况下从薄垫片上切下的垫片的短时压缩性和室温下的恢复率。它不用于测试长时间应力作用下的压缩性，通常称为“蠕变”，或在这种长时间应力作用后的恢复，其逆作用通常称为“压缩永久变形”此外，它不适用于室温以外的测试。在需要的情况下，也可以从测试数据中计算回弹特性（恢复量表示为压缩厚度的百分比）。 1.2以国际单位制表示的数值应视为标准。括号中给出的值仅供参考。 1.3 本标准并非旨在解决与其使用相关的所有安全问题（如有）。 本标准的用户有责任在使用前制定适当的安全和健康实践，并确定监管限制的适用性。

1.1 This test method covers determination of the short-time compressibility and recovery at room temperature of sheet-gasket materials, form-in-place gaskets, and in certain cases, gaskets cut from sheets. It is not intended as a test for compressibility under prolonged stress application, generally referred to as "creep," or for recovery following such prolonged stress application, the inverse of which is generally referred to as "compression set." Also, it is not intended for tests at other than room temperature. A resiliency characteristic (the amount recovered expressed as a percentage of the compressed thickness) may also be calculated from the test data where desired. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.