现行

BS ISO 12132-2017

Plain bearings. Quality assurance of thin-walled half bearings. Design FMEA
滑动轴承 薄壁半轴承的质量保证 设计FMEA

2017-03-31

现行

KS B ISO 12132

플레인 베어링 — 얇은 벽 분할 베어링의 품질보증 — FMEA 설계
平面轴承 - 薄壁半轴承的质量保证 - 设计Fmea

2017-12-29

现行

KS B ISO 12132(2022 Confirm)

플레인 베어링 — 얇은 벽 분할 베어링의 품질보증 — FMEA 설계
滑动轴承.薄壁半轴承的质量保证.设计FMEA

2017-12-29

现行

ISO 12132-2017

Plain bearings — Quality assurance of thin-walled half bearings — Design FMEA
平面轴承 - 薄壁半轴承的质量保证 - 设计Fmea

2017-03-20

现行

GB/T 23896-2009

滑动轴承 薄壁轴瓦质量保证 设计阶段的失效模式和效应分析（FMEA）
Plain bearings - Quality assurance of thin - Walled half bearings - Design FMEA

2009-05-26

现行

GB/T 23895-2009

滑动轴承 薄壁轴瓦质量保证 缩小轴承间隙范围的选择装配
Plain bearings - Quality assurance of thin-walled half bearings - Selective assembly of bearings to achieve a narrow clearance

2009-05-26

现行

ISO 13778-2017

Plain bearings — Quality assurance of thin-walled half bearings — Selective assembly of bearings to achieve a narrow clearance range
滑动轴承 - 薄壁半轴承的质量保证 - 轴承的选择性组装 以实现窄的间隙范围

2017-04-04

现行

BS ISO 13778-2017

Plain bearings. Quality assurance of thin-walled half bearings. Selective assembly of bearings to achieve a narrow clearance range
滑动轴承 薄壁半轴承的质量保证 选择性装配轴承 以实现窄间隙范围

2017-04-25

现行

GOST ISO 12306-1996

Подшипники скольжения. Измерение толщины стенок тонкостенных вкладышей и тонкостенных сплошных и свертных втулок
滑动轴承 薄壁半轴承和薄壁衬套的壁厚测量

1996-10-04

现行

BS 7675-1993

Plain bearings. Thin-walled half bearings. Checking of peripheral length
滑动轴承 薄壁半轴承 检查周长

1993-07-15

现行

GOST ISO 6524-1995

Подшипники скольжения. Контроль длины развертки тонкостенных вкладышей
滑动轴承 薄壁半轴承的外围长度检查

1995-11-28

现行

BS ISO 6282-2018

Plain bearings. Metallic thin-walled half bearings. Determination of the 0,01*-limit
滑动轴承 金属薄壁半轴承 0,01*极限的确定

2018-07-02

现行

ISO 6282-2018

Plain bearings — Metallic thin-walled half bearings — Determination of the sigma 0,01*-limit
滑动轴承 - 金属薄壁半轴承 - 确定西格玛0,01 *限制

2018-06-28

现行

GOST 28340-1989

Подшипники скольжения. Металлические тонкостенные вкладыши. Определение предельной величины сигма* 0,01
滑动轴承 金属薄壁半轴承 sigma * 0,01 - limit的确定

现行

BS ISO 3548-2-2020

Plain bearings. Thin-walled half bearings with or without flange-Measurement of wall thickness and flange thickness
滑动轴承 带或不带法兰的薄壁半轴承

2020-09-15

现行

GB/T 42614-2023

滑动轴承 金属无法兰薄壁轴瓦 σ0.01*极限值的测定
Plain bearings—Metallic thin-walled half bearings without flange—Determination of the σ0.01*-limit

2023-05-23

现行

ISO 3548-2-2020

Plain bearings — Thin-walled half bearings with or without flange — Part 2: Measurement of wall thickness and flange thickness
滑动轴承 - 带或不带法兰的薄壁半轴承 - 第2部分:壁厚和法兰厚度的测量

2020-09-09

现行

GB/T 7308.2-2021

滑动轴承 有法兰或无法兰薄壁轴瓦 第2部分:轴瓦壁厚和法兰厚度测量
Plain bearings—Thin-walled half bearings with or without flange—Part 2: Measurement of wall thickness and flange thickness

2021-03-09

现行

ISO 3548-3-2023

Plain bearings — Thin-walled half bearings with or without flange — Part 3: Determination of the peripheral length
滑动轴承.带或不带法兰的薄壁半轴承.第3部分:周长的测定

2023-03-16

现行

DIN ISO 6524

Plain bearings - Thin-walled half-bearings - Checking of peripherical length; identical with ISO 6524:1992
滑动轴承.薄壁半轴承.周向长度的检查；与ISO 6524:1992相同

1995-02-01