本文件规定了两种测量刚度的方法，以及一种测定橡胶和塑料软管和管道在亚环境温度下弯曲到特定半径时的柔韧性的方法。方法A适用于孔径小于等于25 mm的不可折叠橡胶和塑料软管和管道。当温度从标准实验室温度降低时，该方法提供了一种测量软管或管道刚度的方法。方法B适用于孔径不超过100 mm的橡胶和塑料软管和管道，并提供了一种评估软管或管道在指定接头处绕心轴弯曲时灵活性的方法- 环境温度。它也可以用作常规质量控制测试。方法C适用于孔径大于等于100 mm的橡胶和塑料软管和管道。该方法提供了一种在亚环境温度下测量软管和管道刚度的方法。该方法仅适用于不可折叠的软管和管道。交叉引用:ISO 1402ISO 8330ISO 23529购买本文件时可获得的所有现行修订均包含在购买本文件中。

This document specifies two methods for measuring the stiffness and one method for the determination of the flexibility of rubber and plastics hoses and tubing when they are bent to a specific radius at sub-ambient temperatures.Method A is suitable for non-collapsible rubber and plastics hoses and tubing with a bore of up to and including 25 mm. This method provides a means of measuring the stiffness of the hose or tubing when the temperature is reduced from a standard laboratory temperature.Method B is suitable for rubber and plastics hoses and tubing with a bore of up to 100 mm and provides a means of assessing the flexibility of the hose or tubing when bent around a mandrel at a specified sub-ambient temperature. It can also be used as a routine quality control test.Method C is suitable for rubber and plastics hoses and tubing with a bore of 100 mm and greater. This method provides a means of measuring the stiffness of the hose and tubing at sub-ambient temperatures. This method is only suitable for hoses and tubing which are non-collapsible.Cross References:ISO 1402ISO 8330ISO 23529All current amendments available at time of purchase are included with the purchase of this document.