BS 95/208511 DC-IEC 1188-5-7 印制板和印制板组件的设计和使用第五部分分段设计和使用要求附件（土地/联合）注意事项第七节两侧带有立柱（DIP）安装引线的组件 52/578/CD 两侧带有立柱（DIP）安装引线的部件-国家数字标准馆

现行 BS 95/208511 DC

到馆提醒

收藏跟踪

购买正版

IEC 1188-5-7. Design and use of printed boards and printed board assemblies. Part 5.Sectional design and use requirements. Attachment (land/joint) considerations. Section 7. Components with post (DIP) mounting leads on two sides. 52/578/CD. Components with post (DIP) mounting leads on two sides IEC 1188-5-7 印制板和印制板组件的设计和使用第五部分分段设计和使用要求附件（土地/联合）注意事项第七节两侧带有立柱（DIP）安装引线的组件 52/578/CD 两侧带有立柱（DIP）安装引线的部件

发布日期： 1995-07-12

购买本文件时可获得的所有当前修订均包含在购买本文件中。

All current amendments available at time of purchase are included with the purchase of this document.

分类信息

发布单位或类别：英国-英国标准学会

关联关系

研制信息

相似标准/计划/法规

BS 95/208506 DC

IEC 1188-5-2. Design and use of printed boards and printed board assemblies. Part 5. Sectional design and use requirements. Attachment (land/joint) considerations. Section 2. Discrete components 52/573/CD. Components with Gull-wing leads on two sides
IEC 1188-5-2 印制板和印制板组件的设计和使用第五部分分段设计和使用要求附件（土地/联合）注意事项第二节分立元件52/573/CD 两侧带有鸥翼引线的部件

BS 95/208508 DC

IEC 1188-5-4. Design and use of printed boards and printed board assemblies. Part 5: Sectional design and use requirements - attachment (land/joint) considerations. Section 4: Components with J leads on two sides. 52/575/CD. Components with J leads on two sides
IEC 1188-5-4 印制板和印制板组件的设计和使用第5部分:截面设计和使用要求——附件（接地/接头）注意事项第4节:两侧带有J导线的部件 52/575/CD 两侧带有J导线的部件

BS 95/208507 DC

IEC 1188-5-3. Design and use of printed boards and printed board assemblies. Part 5. Sectional design and use requirements. Attachment (land/joint) considerations. Section 3. Components with gull-wing leads on two sides 52/574/CD. Components with Gull-wing leads on two sides
IEC 1188-5-3 印制板和印制板组件的设计和使用第五部分分段设计和使用要求附件（土地/联合）注意事项第三节两侧带有鸥翼引线的部件52/574/CD 两侧带有鸥翼引线的部件

Printed boards and printed board assemblies - Design and use - Part 7: Electronic component zero orientation for CAD library construction (IEC 61188-7:2017); German version EN 61188-7:2017
印制板和印制板组件.设计和使用.第7部分:CAD库构造用电子元件零定向（IEC 61188-7-2017）；德文版EN 61188-7:2017

DIN EN 61188-5-1

Printed boards and printed board assemblies - Design and use - Part 5-1: Attachment (land/joint) considerations - Generic requirements (IEC 61188-5-1:2002); German version EN 61188-5-1:2002
印制板和印制板组件.设计和使用.第5-1部分:附件（焊盘/接头）注意事项.一般要求（IEC 61188-5-1-2002）；德文版EN 61188-5-1:2002

DIN EN 61188-5-2

Printed boards and printed board assemblies - Design and use - Part 5-2: Attachment (land/joint) considerations - Discrete components (IEC 61188-5-2:2003); German version EN 61188-5-2:2003
印制板和印制板组件.设计和使用.第5-2部分:附件（焊盘/接头）注意事项.分立元件（IEC 61188-5-2-2003）；德文版EN 61188-5-2:2003

DIN EN 61188-5-5

Printed boards and printed board assemblies - Design and use - Part 5-5: Attachment (land/joint) considerations - Components with gull-wing leads on four sides (IEC 61188-5-5:2007); German version EN 61188-5-5:2007
印制板和印制板组件.设计和使用.第5-5部分:附件（焊盘/接头）注意事项.四边带鸥翼引线的部件（IEC 61188-5-5-2007）；德文版EN 61188-5-5:2007

DIN EN 61188-5-4

Printed boards and printed board assemblies - Design and use - Part 5-4: Attachment (land/joint) considerations - Components with J leads on two sides (IEC 61188-5-4:2007); German version EN 61188-5-4:2007
印制板和印制板组件.设计和使用.第5-4部分:附件（焊盘/接头）注意事项.两侧带J引线的部件（IEC 61188-5-4-2007）；德文版EN 61188-5-4:2007

DIN EN 61188-5-3

Printed boards and printed board assemblies - Design and use - Part 5-3: Attachment (land/joint) considerations - Components with gull-wing leads on two sides (IEC 61188-5-3:2007); German version EN 61188-5-3:2007
印制板和印制板组件.设计和使用.第5-3部分:附件（焊盘/接头）注意事项.两侧带鸥翼引线的部件（IEC 61188-5-3-2007）；德文版EN 61188-5-3:2007

DIN EN 61188-5-6

Printed boards and printed board assemblies - Design and use - Part 5-6: Attachment (land/joint) considerations; Chip carriers with J-leads on four sides (IEC 61188-5-6:2003); German version EN 61188-5-6:2003
印制板和印制板组件.设计和使用.第5-6部分:附件（焊盘/接头）注意事项；四边带有J形引线的芯片载体（IEC 61188-5-6-2003）；德文版EN 61188-5-6:2003

DIN EN 61188-5-8

Printed boards and printed board assemblies - Design and use - Part 5-8: Attachment (land/joint) considerations - Area array components (BGA, FBGA, CGA, LGA) (IEC 61188-5-8:2007); German version EN 61188-5-8:2008
印制板和印制板组件.设计和使用.第5-8部分:附件（焊盘/接头）注意事项.面阵元件（BGA FBGA CGA LGA）（IEC 61188-5-8-2007）；德文版EN 61188-5-8:2008

DIN EN 61188-5-5-DRAFT

Draft Document - Printed board and printed board assemblies - Design and use - Part 5-5: Sectional requirements - Attachment (land/joint) considerations - Components with gull-wing leads on four sides (IEC 91/465/CDV:2004); German version prEN 61188-5-5:2004
文件草案.印制板和印制板组件.设计和使用.第5-5部分:截面要求.附件（焊盘/接头）考虑.四边带鸥翼引线的部件（IEC 91/465/CDV:2004）；德文版prEN 61188-5-5:2004

DIN IEC 61188-5-8-DRAFT

Draft Document - Printed board and printed board assemblies - Design and use - Part 5-8 : Sectional Requirement - Attachment (land/joint) considerations - Area array components (BGA, FBGA, CGA, LGA) (IEC 91/416/CD:2003)
文件草稿印制板和印制板组件设计和使用第5-8部分:分要求附件（焊盘/接头）注意事项面阵元件（BGA、FBGA、CGA、LGA）（IEC 91/416/CD:2003）

DIN EN 61188-5-4-DRAFT

Draft Document - Printed boards and printed board assemblies - Design and use - Part 5-4: Sectional requirements - Attachment (land/joint) consideration - Components with J leads on two sides (IEC 91/464/CDV:2004); German version prEN 61188-5-4:2004
文件草案.印制板和印制板组件.设计和使用.第5-4部分:分段要求.附件（焊盘/接头）考虑.两侧带J引线的部件（IEC 91/464/CDV:2004）；德文版prEN 61188-5-4:2004

DIN EN 61188-5-3-DRAFT

Draft Document - Printed boards and printed board assemblies - design and use - Part 5-3: Sectional requirements - attachment (land/joint) considerations - components with gull-wing leads on two sides (IEC 91/463/CDV:2004); German version prEN 61188-5-3:2004
文件草案.印制板和印制板组件.设计和使用.第5-3部分:截面要求.附件（焊盘/接头）考虑.两侧带鸥翼引线的部件（IEC 91/463/CDV:2004）；德文版prEN 61188-5-3:2004

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统