范围:IEC 61892的本部分规定了危险区域分类和电气设备选择的要求，以及移动式和固定式海上装置危险区域内的安装，包括海上石油工业中用于钻井、生产、住宿、加工的管道、抽水或“清管”站、压气站和单浮标系泊装置，储存和卸载目的。 它适用于所有装置，无论是永久性的、临时的、可运输的还是个人的，适用于交流装置和直流装置，无任何电压水平限制。参考设备标准可能会给出电压水平限制。 本文件基于IEC TC 31制定的关于危险区域内装置的区域分类和要求的国际标准的要求，并给出了移动式和固定式海上装置上装置的附加要求。 本文件规定了有关以下方面的要求:区域分类、电气系统、电气设备的选择、电缆和布线系统、通风、电池室的通风要求，以及检查、维护、维修和大修。 本文件提供了有关以下主题的信息:气体检测系统和极低环境温度下的电气安装。 本文件不适用于医疗用固定设备、油罐车电气装置和非电气设备产生的点火源控制。 注1:对于医疗室，IEC 60364-7-710提供了具体要求。IEC 60092-502中给出了油轮的要求。 附注2关于保护非营利组织的指导意见- 电气设备见ISO 80079-36、ISO 80079-37和IMO 2009 MODU规范，6.7交叉引用:IEC 60079-14:2013IEC 62485-2:2010IEC 61892-2:2019IEC 61892-1:2019IEC 60079-10-1:2015IEC 60079-17IEC 60079-13IEC 60079-19ISO 3864-1IEC 60092-502IEC TS 60034-25IEC 60079-25IEC 61892-4IEC 60050（双方）ISO/IEC 80079-20-1ISO 80079-36IEC 60364-7-710IEC 60079-11IEC 61285ISO 13702IEC/IEEE 60079-30-SO80079-37IEC 60079-1IEC 60079-16EC/IEC 6003050427IEC TS 60079-43IEC 60079-29-1ISO 15138:2018IEC 60079-0:2017IEC 60079-0:2007IEC 61892-6:2019购买本文件时提供的所有现行修订版均包含在购买本文件中。

Scope: This part of IEC 61892 provides requirements for hazardous area classification and selection of electrical equipment and installation in hazardous areas in mobile and fixed offshore units, including pipeline, pumping or "pigging" stations, compressor stations and single buoy moorings, used in the offshore petroleum industry for drilling, production, accommodation, processing, storage and offloading purposes. It applies to all installations, whether permanent, temporary, transportable or personal, to AC installations and DC installations without any voltage level limitation. Referenced equipment standards may give voltage level limitations. This document is based on the requirements of International Standards developed by IEC TC 31 regarding area classification and requirements as to installations in hazardous areas and gives additional requirements for installations on mobile and fixed offshore units. This document specifies requirements such as those concerning- area classification,- electrical systems,- selection of electrical equipment,- cables and wiring systems,- ventilation,- ventilation requirement for battery compartments, and- inspection, maintenance, repair and overhaul. This document gives information on topics such as- gas detection systems, and- electrical installations in extremely low ambient temperatures. This document does not apply to- fixed equipment for medical purposes,- electrical installations of tankers, and- control of ignition sources other than those created by electrical equipment. NOTE 1 For medical rooms, IEC 60364-7-710 provides specific requirements. Requirements for tankers are given in IEC 60092-502. NOTE 2 Guidance on protection of non-electrical equipment can be found in ISO 80079-36, ISO 80079-37 and IMO 2009 MODU Code, 6.7Cross References:IEC 60079-14:2013IEC 62485-2:2010IEC 61892-2:2019IEC 61892-1:2019IEC 60079-10-1:2015IEC 60079-17IEC 60079-13IEC 60079-19ISO 3864-1IEC 60092-502IEC TS 60034-25IEC 60079-25IEC 61892-4IEC 60050 (toutes les parties)ISO/IEC 80079-20-1ISO 80079-36IEC 60364-7-710IEC 60079-11IEC 61285ISO 13702IEC/IEEE 60079-30-1ISO 80079-37IEC TR 60079-16IEC 60079-1IEC/IEEE 60079-30-2CENELEC CLC/TR 50427IEC TS 60079-43IEC 60079-29-1ISO 15138:2018IEC 60079-0:2017IEC 60079-0:2007IEC 61892-6:2019All current amendments available at time of purchase are included with the purchase of this document.