DL/T 2068-2019-电力生产现场应用电子标签技术规范-国家数字标准馆

现行 DL/T 2068-2019

到馆阅读

收藏跟踪

购买正版

电力生产现场应用电子标签技术规范 Technical specification of electronic label for electric power production field

发布日期： 2019-11-04

实施日期： 2020-05-01

本标准规定了电力行业生产现场应用电子标签应满足的技术要求，包括标签种类及规格、物理特性、电气特性、数据格式、通信性能的要求。
本标准适用于电力生产各环节(包括发、输、变、配等）应用的电子标签及读写终端，其他应用(计量、继保、调度等）也可作为参考

分类信息

发布单位或类别：中国-行业标准-电力

CCS分类： K04电工 - 电工综合 - 基础标准和通用方法

ICS分类： 29.020电气工程 - 电气工程综合

关联关系

研制信息

归口单位：电力行业信息标准化技术委员会

起草单位：中国电力科学研究院有限公司、南方电网科学研究院有限责任公司、中国大唐集团科学技术研究院有限公司、国网北京市电力公司、国网信息通信产业集团有限公司

起草人：全杰、张明皓、蒲天骄、邓春宇、张朝阳、汪洋、丁慧霞、张阁、陈柯、雷超杰、方帅、吴洋、吴振法、余志良、王文赫、杜鹃、赵军伟、许爱东、张竟成、苏发

相似标准/计划/法规

电力金具节能产品认证技术要求

高原机车车辆电工电子产品通用技术条件
General technical specification of electric and electronic products-used on rolling stock for plateau

GB/T 20626.1-2017

特殊环境条件高原电工电子产品第1部分：通用技术要求
Specific environmental condition—Electric and electronic products for plateau—Part 1:General technical requirements

GB/T 36560-2018

电子电气产品有害物质限制使用符合性证明技术文档规范
Specifications for technical documentation for the conformity demonstration of electrical and electronic products with respect to the restriction of hazardous substances

IEC 61076-2-111-2017

Connectors for electrical and electronic equipment - Product requirements - Part 2-111: Circular connectors - Detail specification for power connectors with M12 screw-locking
电气和电子设备用连接器.产品要求.第2-111部分:圆形连接器.带M12螺钉锁紧的电源连接器详细规范

BS PD IEC/PAS 61076-3-126-2018

Connectors for electrical and electronic equipment. Product requirements-Rectangular connectors - Detail specification for 5 pole power connector for industrial environments with push-pull locking
电气和电子设备用连接器产品要求矩形连接器.带推拉锁定的工业环境用5极电源连接器详细规范

IEC 61076-3-126-2023

Connectors for electrical and electronic equipment - Product requirements - Part 3-126: Rectangular connectors - Detail specification for 5-way power connectors for industrial environments with push-pull locking
电气和电子设备用连接器.产品要求.第3-126部分:矩形连接器.具有推拉锁定的工业环境用5路电源连接器的详细规范

BS EN IEC 61076-8-102-2020

Connectors for electrical and electronic equipment. Product requirements-Power connectors. Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 150 A
电气和电子设备用连接器产品要求

BS EN IEC 61076-8-101-2020

Connectors for electrical and electronic equipment. Product requirements-Power connectors. Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 40 A
电气和电子设备用连接器产品要求

BS EN IEC 61076-8-100-2020

Connectors for electrical and electronic equipment. Product requirements-Power connectors. Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 20 A
电气和电子设备用连接器产品要求

BS EN IEC 61076-3-123-2019

Connectors for electrical and electronic equipment. Product requirements-Rectangular connectors. Detail specification for hybrid connectors for industrial environments, for power supply and fibre optic data transmission, with push-pull locking
电气和电子设备用连接器产品要求

BS EN IEC 61076-2-114-2020

Connectors for electrical and electronic equipment. Product requirements-Circular connectors. Detail specification for connectors with M8 screw-locking with power contacts and signal contacts for data transmission up to 100 MHz
电气和电子设备用连接器产品要求

IEC 61076-8-105-2023

Connectors for electrical and electronic equipment - Product requirements - Part 8-105: Power connectors – Detail specification for 2-pole snap locking rectangular power connectors with plastic housing for 63 A rated current and 400 V rated voltage
电气和电子设备用连接器.产品要求.第8-105部分:电源连接器.63A额定电流和400V额定电压用带塑料外壳的双极快锁矩形电源连接器的详细规范

IEC 61076-2-116-2022

Connectors for electrical and electronic equipment - Product requirements - Part 2 -116: Detail specification for circular connectors size 15 with up to 3+PE power contacts and auxiliary contacts, with bayonet-locking.
电气和电子设备用连接器产品要求第2-116部分:带卡口锁定的带3+PE电源触点和辅助触点的15号圆形连接器的详细规范

IEC 61076-8-102-2020

Connectors for electrical and electronic equipment - Product requirements - Part 8-102: Power connectors - Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 150 A
电子设备连接器 - 产品要求 - 第8-102部分:电源连接器 - 2P或3P电源加2P信号屏蔽和密封连接器的详细规范带塑料外壳额定电流为150 A

IEC 61076-8-101-2020

Connectors for electrical and electronic equipment - Product requirements - Part 8-101: Power connectors - Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 40 A
电气和电子设备用连接器.产品要求.第8-101部分:电源连接器.额定电流为40A的塑料外壳的2极或3极电源加2极信号屏蔽和密封连接器详细规范

IEC 61076-8-100-2020

Connectors for electrical and electronic equipment - Product requirements - Part 8-100: Power connectors - Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 20 A
电气和电子设备用连接器.产品要求.第8-100部分:电源连接器.额定电流为20A的塑料外壳2极或3极电源加2极信号屏蔽和密封连接器详细规范

IEC 61076-3-123-2019

Connectors for electrical and electronic equipment - Product requirements - Part 3-123: Rectangular connectors - Detail specification for hybrid connectors for industrial environments, for power supply and fibre optic data transmission, with push-pull locking
电气和电子设备用连接器.产品要求.第3-123部分:矩形连接器.带推拉锁定的工业环境用电源和光纤数据传输用混合连接器的详细规范

IEC 61076-2-114-2020

Connectors for electrical and electronic equipment - Product requirements - Part 2-114: Circular connectors - Detail specification for connectors with M8 screw- locking with power contacts and signal contacts for data transmission up to 100 MHz
电气和电子设备用连接器.产品要求.第2-114部分:圆形连接器.带M8螺钉的连接器的详细规范.高达100MHz的数据传输用带电源触点和信号触点的锁定

IEC 61076-8-104-2023

Connectors for electrical and electronic equipment - Product requirements - Part 8-104: Power connectors - Detail specification for 2-pole circular connectors with 40 A rated current and push-pull locking IP65/IP67 with metal housing
电气和电子设备用连接器.产品要求.第8-104部分:电源连接器.额定电流为40A、带金属外壳的推拉式锁定IP65/IP67的双极圆形连接器的详细规范

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统