ISO 11148-13:2017规定了用于安装紧固件（见附录B）的手持式非电动工具（以下简称“紧固件驱动工具”）的安全要求，该工具与工件形成机械连接或连接，例如木材和木基材料、塑料材料、纤维材料（松散或压实）、胶结材料，金属和这些材料的组合。紧固件的紧固件驱动工具可以由压缩空气或可燃气体（可由电池或蓄电池点燃）提供动力，能量通过不离开装置的中间部件传输到受影响元件。这些工具拟由一名操作员使用，并由操作员的手或多只手支撑，带或不带悬架，例如平衡器。 ISO 11148-13:2017适用于紧固件驱动工具，在该工具中，能量被施加到加载的紧固件上，以将其驱动到工件中。 ISO 11148-13:2017不适用于紧固件驱动工具，其中驱动紧固件的能量来自粉末驱动筒、液压装置或任何类型的电源。 ISO 11148-13:2017未涉及将手持电动工具安装在夹具中的特殊要求和修改。 ISO 11148-13:2017规定了与紧固件驱动工具相关的所有重大危险、危险情况或危险事件，当它们按预期使用时，以及在制造商合理预见的误用条件下使用时，但在潜在爆炸性环境中使用电动工具的情况除外。 注意ISO 80079？36给出了潜在爆炸性环境中非电气设备的要求。

ISO 11148-13:2017 specifies safety requirements for hand-held non-electric power tools (hereinafter referred to as "fastener driving tools") intended for installation of a fastener (see Annex B), forming a mechanical connection or attachment with the workpiece which are for example wood and wood-based materials, plastic materials, fibre materials (loose or compacted), cementitious materials, metals and combinations of these materials. The fastener driving tools for fasteners can be powered by compressed air or combustible gases (which may be ignited by a battery or accumulator) and the energy is transmitted to an impacted element by an intermediary component that does not leave the device. These tools are intended to be used by one operator and supported by the operator's hand or hands, with or without a suspension, e.g. a balancer. ISO 11148-13:2017 is applicable to fastener driving tools in which energy is applied to a loaded fastener for the purpose of driving this into a workpiece. ISO 11148-13:2017 is not applicable to fastener driving tools in which the energy for driving fasteners is drawn from powder-actuated cartridges, hydraulics or from any type of electrical supply. ISO 11148-13:2017 does not deal with special requirements and modifications of hand-held power tools for the purpose of mounting them in a fixture. ISO 11148-13:2017 deals with all significant hazards, hazardous situations or hazardous events relevant to fastener driving tools for fasteners when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, with the exception of the use of power tools in potentially explosive atmospheres. NOTE ISO 80079?36 gives requirements for non-electrical equipment for potentially explosive atmospheres.