Aerospace. Drivers, ribbed, for internal offset cruciform ribbed or unribbed drives. Metric series
航空航天带肋驱动器 用于内部偏置十字形带肋或无肋驱动器 公制系列

2002-08-06

Aerospace — Drivers, ribbed, for internal offset cruciform ribbed or unribbed drives — Metric series
航空和航天；带肋驱动器 用于内部偏置十字形带肋或无肋驱动器——公制系列

2002-07-04

Aerospace. Gauges, for internal offset cruciform ribbed or unribbed drives. Metric series
航空航天内部偏置十字肋或无肋传动用量规 公制系列

2002-08-06

Aerospace — Gauges, for internal offset cruciform ribbed or unribbed drives — Metric series
航空和航天；内部偏置十字肋或无肋传动用量规——公制系列

2002-07-04

항공 우주 - 나사, 접시 머리, 내부 오프셋 십자홈이 있거나 없는 드라이브, 머리끝 나사, MJ 나사, 금속 재료, 도장 또는 비도장, 강도 분류 1100MPa 이하­치수
航空航天 - 螺丝 平头 内部偏移十字形肋或UNRIBBED DRIVE 螺纹头 MJ螺纹 金属材料 涂层或无涂层 抗剪强度等级小于或等于1100MPa - 尺寸

1998-12-19

항공 우주 - 나사, 접시 머리, 내부 오프셋 십자홈이 있거나 없는 드라이브, 머리끝 나사, MJ 나사, 금속 재료, 도장 또는 비도장, 강도 분류 1100MPa 이하­치수
航空航天.内偏置粗糙带肋或无肋传动、螺纹连接至头部、MJ螺纹、金属材料、涂层或无涂层、强度等级小于或等于1100MPa的盘头螺钉.尺寸

1998-12-19

Aerospace — Screws, pan head, internal offset cruciform ribbed or unribbed drive, threaded to head, MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa — Dimensions
航空和航天；螺钉 盘头 内偏置十字肋或无肋驱动 螺纹至头部 MJ螺纹 金属材料 有涂层或无涂层 强度等级小于或等于1100 MPa——尺寸

1997-10-15

Aerospace. Screws, pan head, internal offset cruciform ribbed or unribbed drive, stepped shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa. Dimensions
航空航天有涂层或无涂层的金属材料短或中长MJ螺纹阶梯柄内偏置十字带肋或无肋传动盘头螺钉 强度等级小于或等于1100 MPa 尺寸

2016-03-31

Aerospace — Screws, pan head, internal offset cruciform ribbed or unribbed drive, stepped shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa — Dimensions
航空航天 - 螺丝 盘头 内部偏移十字形带肋或未经驱动 阶梯柄 短或中等长度MJ螺纹 金属材料 涂层或未涂层 强度等级小于或等于1 100 MPa - 尺寸

2016-02-17

Aerospace — Screws, pan head, internal offset cruciform ribbed or unribbed drive, pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa — Dimensions
航空航天.强度等级小于或等于1100MPa的金属材料长MJ螺纹中径柄内偏置十字形带肋或无肋盘头螺钉.尺寸

2023-11-01

Aerospace. Screws, 100 degrees normal countersunk head, internal offset cruciform ribbed or unribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions
航空航天100°标准沉头螺钉 内偏置十字肋或无肋驱动 标准柄 短或中长MJ螺纹 金属材料 有涂层或无涂层 强度等级小于或等于1100 MPa 尺寸

2008-09-30

Aerospace. Screws, 100 degrees reduced countersunk head, internal offset cruciform ribbed or unribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions
航空航天100度缩径沉头螺钉 内偏置十字肋或无肋驱动 标准柄 短或中长MJ螺纹 金属材料 有涂层或无涂层 强度等级小于或等于1100 MPa 尺寸

2008-09-30

Aerospace — Screws, 100 degrees reduced countersunk head, internal offset cruciform ribbed or unribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa — Dimensions
航空和航天；100度缩径沉头螺钉 内偏置十字肋或无肋驱动 标准柄 短或中长MJ螺纹 金属材料 有涂层或无涂层 强度等级小于或等于1100 MPa——尺寸

2008-08-18

Aerospace — Screws, 100 degrees normal countersunk head, internal offset cruciform ribbed or unribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa — Dimensions
航空和航天；100°标准沉头螺钉 内偏置十字肋或无肋传动 标准柄 短或中长MJ螺纹 金属材料 有涂层或无涂层 强度等级小于或等于1100 MPa——尺寸

2008-08-18

항공우주－100° 일반 접시머리 나사, 일반 섕크, 리브가 있는 내부 오프셋 십자형 드라이브, 강도 등급 1 100 MPa 이하,코팅한 또는 코팅하지 않은 금속재, 짧거나 중간 길이 MJ 나사－치수
航空航天－强度等级小于或等于1100兆帕的有涂层或无涂层金属材料短或中长MJ螺纹标准柄内偏置十字肋传动100°标准沉头螺钉－尺寸

2009-12-30