1.1 本规范涵盖由“E”电玻璃纤维纱线编织而成的成品织物，该织物旨在作为结构用层压塑料的增强材料。本规范也适用于由买方和供应商商定的其他玻璃类型制成的织物。 1.2 本规范规定了成品玻璃纤维织物的术语、定义、一般要求和物理要求。本规范允许在制造过程中对玻璃纤维纱线应用上浆材料，以便于织造。这些有机材料通常从本色织物中去除，并用与合同文件中规定的树脂基体兼容的饰面代替。 注1: 在大多数情况下，玻璃纤维纱线上的上浆材料通过各种清洁程序去除，作为制备成品织物的第一阶段。当这些纱线上浆材料在清洁过程中被去除时，它们不需要与随后的树脂基体相容。 1.3 以国际单位制或英寸磅单位表示的数值应单独视为标准。每个系统中规定的数值并不完全相等；因此，每个系统应独立使用。将两个系统中的值合并将导致不符合标准。 1.4 本规范是军用规范的替代品系列之一:MIL-Y-1140纱线、帘线、套管、布和胶带- 玻璃和MIL-C-9084布，树脂层压板用玻璃饰面。 1.5 本系列中的其他ASTM规范已经起草完毕，并出现在当前版本的《ASTM标准年鉴》中。其中包括本色玻璃织物、玻璃胶带、玻璃套管、玻璃帘线、玻璃缝纫线和由成品玻璃织物制成的成品层压板。 1.6 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的使用者有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 1.7 本国际标准是根据世界贸易组织技术性贸易壁垒委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认的标准化原则制定的。

1.1 This specification covers finished fabrics woven from “E” electrical glass fiber yarns that are intended as a reinforcing material in laminated plastics for structural use. This specification can also be applied to fabrics made of other glass types as agreed upon between the purchaser and the supplier. 1.2 This specification specifies the terminology, definitions, general requirements, and physical requirements for finished woven glass fabrics This specification permits the application of sizing materials to the glass fiber yarn during manufacture that helps facilitate weaving. These organic materials are typically removed from the greige fabric and replaced with a finish that is compatible with the resin matrix specified in the contracting document. Note 1: Sizing materials on glass fiber yarns, in most cases, are removed by various cleaning procedures as a first stage in preparing a finished fabric. When these yarn sizing materials are removed during a cleaning procedure they need not be compatible with the subsequent resin matrix. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems will result in non-conformance with the standard. 1.4 This specification is one of a series to provide a substitute for Military Specifications: MIL-Y-1140 Yarn, Cord, Sleeving, Cloth, and Tape-Glass; and MIL-C-9084 Cloth, Glass Finished for Resin Laminates. 1.5 Additional ASTM specifications in this series have been drafted and appear in current editions of the Annual Book of ASTM Standards. These include greige glass fabrics, glass tapes, glass sleevings, glass cords, glass sewing threads, and finished laminates made from finished glass fabrics. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.