现行

GB/T 10878-2011

气瓶锥螺纹丝锥
Special taps of taper threads for gas cylinders

2011-12-30

现行

JB/T 8364.3-2010

60°圆锥管螺纹刀具 第3部分：60°圆锥管螺纹丝锥 技术条件
Tools for taper pipe threads with 60° thread angle-Part 3:Taps for taper pipe threads with 60° threads angle-Technical specification

2010-02-21

现行

JB/T 8364.2-2010

60°圆锥管螺纹刀具 第2部分：60°圆锥管螺纹丝锥
Tools for taper pipe threads with 60° thread angle-Part 2:Taps for taper pipe threads with 60° thread angle

2010-02-21

现行

GB/T 20333-2023

圆柱和圆锥管螺纹丝锥的基本尺寸和标志
Taps for parallel and taper pipe threads general dimensions and marking

2023-05-23

现行

BS ISO 2284-2017

Hand taps for parallel and taper pipe threads. General dimensions and marking
用于平行和锥形管螺纹的手动丝锥 一般尺寸和标记

2017-03-31

现行

ISO 2284-2017

Hand taps for parallel and taper pipe threads — General dimensions and marking
用于平行和锥形管螺纹的龙头 - 一般尺寸和标记

2017-02-24

现行

GOST 24672-1981

Калибры для конической резьбы. Технические условия
锥螺纹量规规格

现行

FED GGG-T-80A

TAPS, THREAD CUTTING, CARBON STEEL HAND, CUT THREAD, AMERICAN STANDARD TAPER PIPE THREADS (NO S/S DOCUMENT)
丝锥 螺纹切割 碳钢手工 切割螺纹 美国标准锥管螺纹（无S/S文件）

1970-11-24

现行

FED GGG-T-80A

TAPS, THREAD CUTTING, CARBON STEEL HAND, CUT THREAD, AMERICAN STANDARD TAPER PIPE THREADS (NO S/S DOCUMENT)
丝锥 螺纹切割 碳钢手工 切割螺纹 美国标准锥管螺纹（无S/S文件）

1970-11-24

现行

DIN 8379

Subland twist drills with Morse taper shanks for holes prior to tapping screw threads
攻丝螺纹前孔用莫氏锥柄小带麻花钻

2006-11-01

现行

BS 949-2-1992

Screwing taps-Specification for unified ground thread taps. Manufacturing tolerances
旋塞

1992-12-15

现行

BS 949-4-1990

Screwing taps-Specification for metric ground thread taps: manufacturing tolerances
旋塞

1990-06-29

现行

GOST 6228-1980

Плашки круглые для конической резьбы. Технические условия
圆形螺纹锥形螺纹 规格

现行

BS 1660-3-1988

Machine tapers-Specification for turret sockets and reduction sleeves with tapped ends for tools with Morse taper shanks
机器锥度

1988-09-30

现行

BS 4377-1991

Specification for tapping of holes to receive wire thread inserts (ISO metric threads)
用于安装钢丝螺纹嵌件（ISO公制螺纹）的孔攻丝规范

1991-05-31

现行

JB/T 8824.3-2012

统一螺纹刀具 第3部分：丝锥技术条件
Tool for unified threads - Part 3:Technical specification for taps

2012-05-24

现行

GOST 19879-1974

Метчики машинные для трубной цилиндрической резьбы, оснащенные твердосплавными пластинами. Технические условия
用于管圆柱螺纹的硬质合金机头螺栓 规格

现行

BS 3409-2-1966

Specification for the tapping of holes to receive wire thread inserts (UNC and UNF threads)-Diameters below ¼ in
用于安装钢丝螺纹嵌件（UNC和UNF螺纹）的孔攻丝规范 直径小于3/16英寸

1966-01-31

现行

BS 3409-1-1961

Specification for the tapping of holes to receive wire thread inserts (UNC and UNF threads)-Diameters ¼ in and over
用于安装钢丝螺纹嵌件（UNC和UNF螺纹）的孔攻丝规范 直径3/16英寸及以上

1961-08-16

现行

HB 4264-2004

安装钢丝螺套螺纹孔用丝锥通用规范
Technical specification for tap usedfor fthreaded hole of the wire thread insert

2004-09-01