Short machine taps and hand taps
短机器丝锥和手动丝锥

2017-03-31

Short machine taps and hand taps
短机器水龙头和手动水龙头

2017-03-06

机用和手用丝锥 第3部分：短柄机用和手用丝锥
Machine and hand taps - Part 3：Short shank machine and hand taps

2007-06-25

Machine screwing taps for coarse pitch metric ISO-threads M1.6 to M68
粗螺距公制ISO螺纹M1用机用丝锥 6至M68

2016-02-01

Метчики машинные с удлиненным хвостовиком для метрических резьб от М3 до М10. Размеры
从M3到M10的公制螺纹的长柄机械抽头 尺寸

轻合金安装钢丝螺套用内螺纹通孔的机、手用丝锥
Through-hole machine and hand taps of internal screw on light alloy for installing wire thread insert

2004-09-01

普通钢安装钢丝螺套用内螺纹通孔的机、手用丝锥
Through-hole machine and hand taps of internal screw on common stees for installing wire thread insert

2004-09-01

普通钢安装钢丝螺套用内螺纹不通孔的机、手用丝锥
Non through-hole machine and hand taps of internal screw on common stees for installing wire thread insert

2004-09-01

轻合金安装钢丝螺套用内螺纹不通孔的机、手用丝锥
Non through-hole machine and hand taps of internal screw on light alloy for installing wire thread insert

2004-09-01

Machine screwing taps for fine pitch metric ISO-threads M3 × 0.2 to M52 × 4
细节公制ISO螺纹M3×0.2至M52×4用机用丝锥

2016-01-01

Machine taps with reinforced shank for coarse pitch metric ISO-threads M1 to M10 and fine pitch metric ISO-threads M1 × 0.2 to M10 × 1.25
粗节公制ISO螺纹M1至M10和细节公制ISO螺纹M1×0.2至M10×1.25用带加强柄的机用丝锥

2016-01-01

Machine taps for the tapped holes (EG) for wire thread inserts for ISO metric screw threads according to DIN 8140 - Coarse pitch threads EG M2 to EG M52 and fine pitch threads EG M8 × 1 to EG M48 × 3 - Dimensions
符合DIN 8140标准的ISO公制螺纹用钢丝螺纹嵌件的螺纹孔（EG）机用丝锥-粗节螺纹（如M2至M52）和细节螺纹（如M8×1至M48×3）-尺寸

2003-07-01

TAPS, THREAD CUTTING, CARBON STEEL, HAND CUT THREAD, AMERICAN NATIONAL AND METRIC THREAD FORM, SCREW AND BOLT (SUPERSEDING GGG-T-60) (S/S BY ASME-B94.9-1999)
丝锥 螺纹切削 碳钢 手切螺纹 美国国家和公制螺纹形式 螺钉和螺栓（替代GGG-T-60）（S/S由ASME-B94.9-1999提供）

1970-11-24

TAPS, THREAD CUTTING, CARBON STEEL, HAND CUT THREAD, AMERICAN NATIONAL AND METRIC THREAD FORM, SCREW AND BOLT (SUPERSEDING GGG-T-60) (S/S BY ASME-B94.9-1999)
丝锥 螺纹切削 碳钢 手切螺纹 美国国家和公制螺纹形式 螺钉和螺栓（替代GGG-T-60）（S/S由ASME-B94.9-1999提供）

1970-11-24

TAP, THREAD CUTTING, (STANDARD, AMERICAN NATIONAL FORM AND METRIC SPARK PLUG THREAD, HIGH-SPEED STEEL, GROUND THREAD, HAND) (SUPERSEDING GGG-T-70A) (S/S BY ASME-B94.9-1999)
丝锥 螺纹切削 （美国国家标准和公制火花塞螺纹 高速钢 磨光螺纹 手动）（替代GGG-T-70A）（S/S由ASME-B94.9-1999提供）

1998-09-08

TAP, THREAD CUTTING, (STANDARD, AMERICAN NATIONAL FORM AND METRIC SPARK PLUG THREAD, HIGH-SPEED STEEL, GROUND THREAD, HAND) (SUPERSEDING GGG-T-70A) (S/S BY ASME-B94.9-1999)
丝锥 螺纹切削 （美国国家标准和公制火花塞螺纹 高速钢 磨光螺纹 手动）（替代GGG-T-70A）（S/S由ASME-B94.9-1999提供）

1998-09-08