EN 755-9:2016-铝和铝合金 - 挤压棒/棒管和型材 - 第9部分:型材尺寸和形状的公差-国家数字标准馆

现行 EN 755-9:2016

到馆阅读

收藏跟踪

购买正版

Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9: Profiles, tolerances on dimensions and form 铝和铝合金 - 挤压棒/棒管和型材 - 第9部分:型材尺寸和形状的公差

发布日期： 2016-06-08

实施日期： 2016-06-08

本欧洲标准规定了铝和铝合金挤压型材的尺寸和形状公差，横截面包含在不大于800 mm的外接圆内（见图1）。
本部分使用的温度指示符合EN 515。
本欧洲标准仅适用于通用工程应用的挤压型材。
（.）

This European Standard specifies the tolerances on dimensions and form for aluminium and aluminium alloy extruded profile with a cross section contained within a circumscribing circle not greater than 800 mm (see Figure 1).
The temper designations used in this part are according to EN 515.
This European Standard applies to extruded profiles for general engineering applications only.
(.)

分类信息

发布单位或类别：国际组织-欧洲标准化委员会

CCS分类： H60/69冶金 - 有色金属及其合金产品

ICS分类： 77.150.10有色金属产品 - 铝产品

关联关系

研制信息

归口单位： CEN/TC 132-

相似标准/计划/法规

Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9: Profiles, tolerances on dimensions and form
铝和铝合金挤压棒材、管材和型材第9部分:型材尺寸和形状公差

UNE-EN 755-9-2009

Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9: Profiles, tolerances on dimensions and form
铝和铝合金挤压棒材、管材和型材第9部分:型材尺寸和形状公差

Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 3: Round bars, tolerances on dimensions and form
铝和铝合金 - 挤压棒/棒管和型材 - 第3部分:圆棒尺寸和形状公差

Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 4: Square bars, tolerances on dimensions and form
铝和铝合金 - 挤压棒/棒管和型材 - 第4部分:方棒尺寸和形状公差

ISO 6362-4-2022

Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 4: Tolerances on form and dimensions for profiles
锻铝和铝合金.挤压棒材管材和型材.第4部分:型材的形状和尺寸公差

Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 8: Porthole tubes, tolerances on dimensions and form
铝和铝合金挤压棒材、管材和型材第8部分:舷窗管尺寸和形状公差

UNE-EN 755-8-2009

Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 8: Porthole tubes, tolerances on dimensions and form
铝和铝合金挤压棒材、管材和型材第8部分:舷窗管尺寸和形状公差

Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 8: Porthole tubes, tolerances on dimensions and form
铝和铝合金 - 挤压棒/棒管和型材 - 第8部分:孔眼管尺寸和形式公差

UNE-EN 755-4-2009

Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 4: Square bars, tolerances on dimensions and form
铝和铝合金挤压棒材、管材和型材第4部分:方形棒材尺寸和形状公差

UNE-EN 755-5-2009

Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 5: Rectangular bars, tolerances on dimensions and form
铝和铝合金挤压棒材、管材和型材第5部分:矩形棒材尺寸和形状公差

UNE-EN 755-7-2009

Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 7: Seamless tubes, tolerances on dimensions and form
铝和铝合金挤压棒材、管材和型材第7部分:无缝管尺寸和形状公差

ISO 6362-3-2022

Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 3: Tolerances on form and dimensions for extruded rectangular bars
锻铝和铝合金.挤压棒材管材和型材.第3部分:挤压矩形棒材的形状和尺寸公差

Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 6: Hexagonal bars, tolerances on dimensions and form
铝和铝合金 - 挤压棒/棒管和型材 - 第6部分:六角棒尺寸和形式公差

Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 7: Seamless tubes, tolerances on dimensions and form
铝和铝合金 - 挤压棒/棒管和型材 - 第7部分:无缝管尺寸和形式的公差

UNE-EN 755-6-2009

Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 6: Hexagonal bars, tolerances on dimensions and form
铝和铝合金挤压棒材、管材和型材第6部分:六角棒材尺寸和形状公差

UNE-EN 755-3-2009

Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 3: Round bars, tolerances on dimensions and form
铝和铝合金挤压棒材、管材和型材第3部分:圆钢尺寸和形状公差

Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 5: Rectangular bars, tolerances on dimensions and form
铝和铝合金 - 挤出棒/棒管和型材 - 第5部分:矩形棒尺寸和形式公差

Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 1: Technical conditions for inspection and delivery
铝和铝合金 - 挤压棒/棒管和型材 - 第1部分:检查和交付的技术条件

Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 5: Rectangular bars, tolerances on dimensions and form
铝和铝合金.挤压棒材管材和型材.第5部分:矩形棒材尺寸和形状公差；德文版EN 755-5:2008

Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 4: Square bars, tolerances on dimensions and form
铝和铝合金.挤压棒材管材和型材.第4部分:方形棒材尺寸和形状公差；德文版EN 755-4:2008

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统