首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 ASTM C1788-20
到馆提醒
收藏跟踪
购买正版
Standard Specification for Non Metallic Plaster Bases (Lath) Used With Portland Cement Based Plaster in Vertical Wall Applications 垂直墙用硅酸盐水泥基灰泥用非金属灰泥基层(板条)的标准规范
发布日期: 2020-10-15
1.1 本规范提供了在垂直墙应用中使用非金属灰泥基层和波特兰水泥基灰泥的最低规范。 1.2 单位- 以国际单位制或英寸-磅单位表示的数值应单独视为标准值。每个系统中规定的值不一定是精确的等价物;因此,为确保符合本标准,每个系统应独立使用,且两个系统的值不得组合。 1.3 应从耐火试验报告、工程评估或公认的耐火试验、声音或声学实验室的清单中获取特定组件的施工细节,以达到所需的耐火、声音或声学等级。 1.4 本标准并非旨在解决与其使用相关的所有安全问题(如有)。本标准的用户有责任在使用前制定适当的安全、健康和环境实践,并确定监管限制的适用性。 1.5 本国际标准是根据世界贸易组织技术性贸易壁垒(TBT)委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。
1.1 This specification provides the minimum specification for use of non metallic plaster bases with Portland cement based plaster in vertical wall applications. 1.2 Units— The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined. 1.3 Details of construction for a specific assembly to achieve the required fire resistance, sound, or acoustic rating shall be obtained from reports of fire-resistance tests, engineering evaluations, or listings from recognized fire testing, sound or acoustic laboratories. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
分类信息
关联关系
研制信息
归口单位: C11.02
相似标准/计划/法规