本欧洲标准规定了在潮湿条件下工作的多壁系统烟囱的要求和测试方法（以下以湿烟囱表示）与压力 根据EN 1443的N1，N2或P1型，根据EN 13063-1:2005 A1“的工作温度低于或等于T600，其中燃烧产物通过粘土/陶瓷烟道衬里输送到大气中，标记和检查也在本文件中。 本欧洲标准不适用于结构独立（自立或自支持）系统烟囱。 湿烟囱可以包括以下适当的部件: 粘土/陶瓷烟道衬里; 绝缘层; 外墙; 用于接合烟道衬里或弹性密封剂的耐酸砂浆; 用于连接外墙的砂浆; 终奌站; 烟囱基地 冷凝水收集器 冷凝水出口; 包层 开口部分 清洁检查门; 距离片 加强。 湿系统烟囱涵盖从一个制造来源获得或指定的兼容烟囱组件的组合，对整个系统烟囱负责产品。 注意本文件不包括烟炱烟火烟囱

This European Standard specifies the requirements and test methods for multiwall system chimneys working under wet conditions (in the following expressed as wet chimney) with pressure type N1, N2 or P1 according to EN 1443 and a working temperature below or equal T600 according to !EN 13063-1:2005+A1", in which the products of combustion are conveyed to the atmosphere through clay/ceramic flue liners. Marking and inspection are also covered by this document. This European Standard does not apply to structurally independent (free standing or self supporting) system chimneys. The wet chimney may comprise the following appropriate components: clay/ceramic flue liners; insulation layer; outer walls; acid resistant mortar for jointing flue liners or elastomeric sealant; mortar for jointing outer walls; terminal; chimney base; condensate collector; condensate outlet; cladding; opening section; cleaning and inspection door; distance piece; reinforcement. The wet system chimney covers a combination of compatible chimney components, obtained or specified from one manufacturing source with product responsibility for the whole system chimney. NOTE This document does not cover soot fire resistance chimneys.