首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 IEC 62788-1-2:2016
到馆阅读
收藏跟踪
购买正版
Measurement procedures for materials used in photovoltaic modules - Part 1-2: Encapsulants - Measurement of volume resistivity of photovoltaic encapsulants and other polymeric materials 光伏模块中使用的材料的测量程序第1-2部分:封装 - 光伏封装和其他聚合材料的体积电阻率测量
发布日期: 2016-05-12
IEC 62788-1 2:2016提供了测量光伏(PV)组件中用作封装、边缘密封、前片、背板或任何其他绝缘材料的材料体积电阻率的方法和指南。试验在干燥、潮湿或潮湿的预处理样品上进行。对于由多层组成的前片和后片,测得的电阻率为有效值。该测试用于室温测量,但也可在较高温度下使用。
IEC 62788-1 2:2016 provides a method and guidelines for measuring the volume resistivity of materials used as encapsulation, edge seals, front-sheets, backsheets, or any other insulating material in a photovoltaic (PV) module. The test is performed on dry, humid or wet preconditioned samples. In the case of frontsheets and backsheets comprised of multiple layers, the measured resistivity is an effective value. This test is designed for room temperature measurement, but can also be utilized at higher temperatures.
分类信息
关联关系
研制信息
归口单位: TC 82
相似标准/计划/法规
现行
BS EN 62788-1-2-2016
Measurement procedures for materials used in photovoltaic modules-Encapsulants. Measurement of volume resistivity of photovoltaic encapsulants and other polymeric materials
光伏组件用材料的测量程序
2016-06-30
现行
BS EN IEC 62788-1-7-2020
Measurement procedures for materials used in photovoltaic modules-Encapsulants. Test procedure of optical durability
光伏组件用材料的测量程序
2020-06-18
现行
BS PD CLC/TR 62662-2011
Measurement procedures for materials used in photovoltaic modules-Encapsulants. Test procedure of optical durability
关于芯材料脆性断裂的聚合物绝缘体的生产、测试和诊断指南
2011-12-31
现行
IEC TS 62788-2-2024
Measurement procedures for materials used in photovoltaic modules - Part 2: Polymeric materials - Frontsheets and backsheets
光伏组件用材料的测量程序.第2部分:聚合物材料.正面和背面
2024-07-12
现行
BS PD IEC TS 62788-5-2-2020
Measurement procedures for materials used in photovoltaic modules-Edge seals. Durability evaluation guideline
光伏组件用材料的测量程序
2020-07-03
现行
IEC 62788-1-1-2024
Measurement procedures for materials used in photovoltaic modules - Part 1-1: Encapsulants - Polymeric materials used for encapsulation
光伏组件用材料的测量程序.第1-1部分:密封剂.封装用聚合物材料
2024-09-17
现行
BS PD IEC/TS 62788-7-2-2017
Measurement procedures for materials used in photovoltaic modules-Environmental exposures. Accelerated weathering tests of polymeric materials
光伏组件用材料的测量程序
2017-09-22
现行
BS EN IEC 62788-6-2-2020
Measurement procedures for materials used in photovoltaic modules-General tests. Moisture permeation testing of polymeric materials
光伏组件用材料的测量程序
2020-05-13
现行
BS EN IEC 62788-5-1-2020
Measurement procedures for materials used in photovoltaic modules-Edge seals. Suggested test methods for use with edge seal materials
光伏组件用材料的测量程序
2020-05-13
现行
IEC 62788-1-7-2020
Measurement procedures for materials used in photovoltaic modules - Part 1-7: Encapsulants - Test procedure of optical durability
光伏组件用材料的测量程序.第1-7部分:封装材料.光学耐久性试验程序
2020-04-21
现行
IEC TS 62788-8-1-2024
Measurement procedures for materials used in photovoltaic modules - Part 8-1: Electrically conductive adhesive (ECA) - Measurement of material properties
光伏组件用材料的测量程序.第8-1部分:导电粘合剂(ECA).材料性能的测量
2024-06-11
现行
IEC 62788-2-1-2023
Measurement procedures for materials used in photovoltaic modules - Part 2-1: Polymeric materials - Frontsheet and backsheet - Safety requirements
光伏组件用材料的测量程序.第2-1部分:聚合材料.前片和底片.安全要求
2023-08-25
现行
IEC TS 62788-5-2-2020
Measurement procedures for materials used in photovoltaic modules - Part 5-2: Edge seals - Durability evaluation guideline
光伏组件用材料的测量程序第5-2部分:边缘密封耐久性评估指南
2020-06-22
现行
IEC 62788-6-2-2020
Measurement procedures for materials used in photovoltaic modules - Part 6-2: General tests - Moisture permeation testing of polymeric materials
光伏组件用材料的测量程序.第6-2部分:一般试验.聚合材料的水分渗透试验
2020-03-19
现行
IEC TS 62788-7-2-2017
Measurement procedures for materials used in photovoltaic modules - Part 7-2: Environmental exposures - Accelerated weathering tests of polymeric materials
光伏组件用材料的测量程序第7-2部分:环境暴露聚合材料的加速风化试验
2017-09-06
现行
IEC 62788-5-1-2020+AMD1-2022 CSV
Measurement procedures for materials used in photovoltaic modules - Part 5-1: Edge seals - Suggested test methods for use with edge seal materials
光伏组件用材料的测量程序第5-1部分:边缘密封与边缘密封材料一起使用的建议试验方法
2022-01-28
现行
IEC 62788-5-1-2020
Measurement procedures for materials used in photovoltaic modules - Part 5-1: Edge seals - Suggested test methods for use with edge seal materials
光伏组件用材料的测量程序.第5-1部分:边缘密封.与边缘密封材料一起使用的建议试验方法
2020-03-19
现行
IEC 62788-7-3-2022
Measurement procedures for materials used in photovoltaic modules - Part 7-3: Accelerated stress tests - Methods of abrasion of PV module external surfaces
光伏组件用材料的测量程序第7-3部分:加速应力试验光伏组件外表面的磨损方法
2022-02-22
现行
IEC 62788-7-3-2022+AMD1-2024 CSV
Measurement procedures for materials used in photovoltaic modules - Part 7-3: Accelerated stress tests - Methods of abrasion of PV module external surfaces
光伏组件用材料的测量程序.第7-3部分:加速应力试验.光伏组件外表面的磨损方法
2024-07-31
现行
BS EN 62788-1-6-2017+A1-2020
Measurement procedures for materials used in photovoltaic modules-Encapsulants. Test methods for determining the degree of cure in Ethylene-Vinyl Acetate
光伏组件用材料的测量程序
2020-07-29