BS IEC 60076-15:2015适用于三相和单相充气电力变压器 （包括自动变压器），但某些类别的小型和特殊 变压器，如:额定功率小于1 kVA的单相变压器和三相变压器 小于5千伏安；没有额定电压高于1000 V的绕组的变压器；互感器；安装在机车车辆上的牵引变压器；启动变压器；测试变压器；焊接变压器。当IEC标准不适用于此类变压器（尤其是变压器）时 对于工业应用，没有超过1000 V的绕组），IEC 60076的本部分可以 仍然可以作为整体或部分使用。本标准不满足这些要求 这将使变压器适合安装在一般人可以接近的位置 平民的对于那些有自己IEC标准的电力变压器和电抗器 标准，本部分仅适用于 其他标准中的交叉引用。此类标准适用于:一般电抗器（IEC 60076-6）；自保护变压器（IEC 60076-13）；风力涡轮机用变压器（IEC 60076-16）；牵引变压器和牵引电抗器（IEC 60310）；工业用换流变压器（IEC 61378-1）；高压直流输电用换流变压器（IEC 61378-2）。在本部分的几个地方，规定或建议应签署“协议” 就替代或附加技术解决方案或程序达成一致。这样的 制造商和买方之间达成协议。事情应该 最好在早期提出，并在合同中包含协议 规格注:本标准适用于使用绝缘气体的变压器的气体部件 绝缘液。交叉引用:IEC 60076-1:2011IEC 60076-2:2011IEC 60076-3IEC 60076-5IEC 60076-10IEC 60137IEC 60376IEC 60480IEC 62271-4:2002IEC 60044IEC 60050IEC 60071IEC 60076-6IEC 60076-7IEC 60076-11IEC 60076-13IEC 60076-14:2013IEC 60076-16IEC 60085IEC 60214-1IEC 60310IEC 60721-4IEC/TR 60943IEC 61378-1IEC 61378-2IEC 62271-2032178iso当前ISO标准的所有修订版购买本文件时提供的信息包括在内。

BS IEC 60076-15:2015 applies to three-phase and single-phase gas-filled power transformers (including auto-transformers) with the exception of certain categories of small and special transformers such as:single-phase transformers with rated power less than 1 kVA and three-phase transformers less than 5 kVA;transformers, which have no windings with rated voltage higher than 1 000 V;instrument transformers;traction transformers mounted on rolling stock;starting transformers;testing transformers;welding transformers.When IEC standards do not exist for such categories of transformers (in particular transformer having no winding exceeding 1 000 V for industrial applications), this part of IEC 60076 may still be applicable either as a whole or in part. This standard does not address the requirements that would make a transformer suitable for mounting in a position accessible to the general public. For those categories of power transformers and reactors which have their own IEC standards, this part is applicable only to the extent in which it is specifically called up by cross-reference in the other standard. Such standards exist for:reactors in general (IEC 60076-6);self-protected transformers (IEC 60076-13);transformers for wind turbine applications (IEC 60076-16);traction transformers and traction reactors (IEC 60310);converter transformers for industrial applications (IEC 61378-1);converter transformers for HVDC applications (IEC 61378-2).At several places in this part it is specified or recommended that an 'agreement' should be reached concerning alternative or additional technical solutions or procedures. Such agreement is made between the manufacturer and the purchaser. The matters should preferably be raised at an early stage and the agreements included in the contract specification.NOTE This standard can be applicable to the gas parts of a transformer in which an insulating gas is used with an insulating liquid.Cross References:IEC 60076-1:2011IEC 60076-2:2011IEC 60076-3IEC 60076-5IEC 60076-10IEC 60137IEC 60376IEC 60480IEC 62271-1IEC 62271-4:2002IEC 60044IEC 60050IEC 60071IEC 60076-6IEC 60076-7IEC 60076-11IEC 60076-13IEC 60076-14:2013IEC 60076-16IEC 60085IEC 60214-1IEC 60310IEC 60721-3-4IEC/TR 60943IEC 61378-1IEC 61378-2IEC 62271-203ISO 2178ISO 2409ISO 14122CIGRE brochure 445All current amendments available at time of purchase are included with the purchase of this document.