现行

ASTM D6648-08(2016)

Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
使用弯曲波束流变仪（BBR）测定沥青粘合剂的弯曲蠕变刚度的标准测试方法

2016-10-01

现行

KS F 2390

보형상 유변 물성 측정기를 이용한 아스팔트의 휨 크리프 강성 시험방법
使用弯曲梁流变仪的沥青结合料的弯曲蠕变硬度的标准测试方法

2019-12-31

现行

ASTM F3260-18

Standard Test Method for Determining the Flexural Stiffness of Medical Textiles
用于确定医用纺织品弯曲刚度的标准测试方法

2018-03-01

现行

ASTM C480/C480M-16(2024)

Standard Test Method for Flexure Creep of Sandwich Constructions
夹层结构弯曲蠕变的标准试验方法

2024-05-01

现行

ASTM D2990-17

Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics
塑料拉伸 压缩和弯曲蠕变和蠕变破裂的标准测试方法

2017-03-01

现行

ASTM D6112-23

Standard Test Methods for Compressive and Flexural Creep and Creep-Rupture of Plastic Lumber and Shapes
塑料木材和型材的压缩、弯曲蠕变和蠕变断裂的标准试验方法

2023-11-01

现行

GB/T 7689.4-2013

增强材料 机织物试验方法 第4部分：弯曲硬挺度的测定
Reinforcements - Test method for woven fabrics - Part 4: Determination of flexural stiffness

2013-11-27

现行

ASTM F2433-05(2018)

Standard Test Method for Determining Thermoplastic Pipe Wall Stiffness
测定热塑性管壁刚度的标准试验方法

2018-02-01

现行

ASTM D4553-18

Standard Test Method for Determining In Situ Creep Characteristics of Rock
测定岩石原地蠕变特性的标准试验方法

2018-07-01

现行

ASTM C158-23

Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
玻璃弯曲强度的标准试验方法（断裂模量的测定）

2023-11-01

现行

ASTM D5262-21

Standard Test Method for Determining the Unconfined Tension Creep and Creep Rupture Behavior of Planar Geosynthetics Used for Reinforcement Purposes
加固用平面土工合成材料无侧限拉伸蠕变和蠕变断裂性能测定的标准试验方法

2021-02-15

现行

ASTM D6575/D6575M-22

Standard Test Method for Determining Stiffness of Geosynthetics Used as Turf Reinforcement Mats (TRMs)
测定用作草皮加固垫（TRM）的土工合成材料刚度的标准试验方法

2022-07-01

现行

ASTM D5520-18

Standard Test Method for Laboratory Determination of Creep Properties of Frozen Soil Samples by Uniaxial Compression
用单轴压缩法测定冻土样品蠕变特性的标准试验方法

2018-11-15

现行

AASHTO T 322-07(2020)

Standard Method of Test for Determining the Creep Compliance and Strength of Hot-Mix Asphalt (HMA) Using the Indirect Tensile Test Device
用间接拉伸试验装置测定热拌沥青（HMA）蠕变柔度和强度的标准试验方法

现行

ASTM D8058-24

Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
使用三点弯曲试验测定土工合成水泥基复合垫（GCCM）抗弯强度的标准试验方法

2024-09-01

现行

ASTM C1465-08(2019)

Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Elevated Temperatures
用高温恒定应力速率弯曲试验测定高级陶瓷缓慢裂纹扩展参数的标准试验方法

2019-07-01

现行

ASTM C1834-16(2024)

Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Flexural Testing (Stress Rupture) at Elevated Temperatures
高温下通过恒定应力弯曲试验（应力断裂）测定高级陶瓷慢裂纹扩展参数的标准试验方法

2024-09-01

现行

ASTM C1576-05(2017)

Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Flexural Testing (Stress Rupture) at Ambient Temperature
通过恒定应力弯曲试验（应力破裂）在环境温度下测定先进陶瓷缓慢裂纹生长参数的标准试验方法

2017-02-01

现行

ASTM D8019-23

Standard Test Methods for Determining the Full Section Flexural Modulus and Bending Strength of Fiber Reinforced Polymer Crossarms Assembled with Center Mount Brackets
用中心安装支架组装的纤维增强聚合物横担的全截面弯曲模量和弯曲强度测定的标准试验方法

2023-11-01

现行

ASTM D8069-17a

Standard Test Method for Determining Flexural Modulus of Full Section Pultruded Fiber Reinforced Polymer (FRP) Composite Members with Doubly Symmetric Cross Sections under Bending
测定具有双弯曲截面的全截面拉挤纤维增强聚合物（FRP）复合材料构件弯曲模量的标准试验方法

2017-12-01