现行

JB/T 8354.10-2020

抛喷丸清理及强化用金属磨料 第10部分：铸铁砂
Metallic abrasives of shot blast cleaning and shot peening-Part 10:Cast iron grit

2020-04-16

现行

JB/T 8354.2-2015

抛喷丸清理及强化用金属磨料 第2部分：高碳铸钢丸
Metallic abrasives of shot blast cleaning and shot peening - Part 2:High carbon cast steel shot

2015-04-30

现行

JB/T 8354.4-2015

抛喷丸清理及强化用金属磨料 第4部分：低碳铸钢丸
Metallic abrasives of shot blast cleaning and peening - Part 4:Low carbon cast steel shot

2015-10-10

现行

JB/T 8354.3-2015

抛喷丸清理及强化用金属磨料 第3部分：高碳铸钢砂
Metallic abrasives of shot blast cleaning and shot peening - Part 3:High carbon cast steel grit

2015-04-30

现行

GB/T 18838.5-2015

涂覆涂料前钢材表面处理 喷射清理用金属磨料的技术要求 第5部分：钢丝切丸
Preparation of steel substrates before application of paints and related products—Specifications for metallic blast-cleaning abrasives—Part 5: Steel cut wire shot

2015-09-11

现行

KS M ISO 11124-4

도료 및 관련 제품의 도장 전 강철 소지 표면처리 — 금속 블라스트 세정용 연마제의 규격 — 제4부: 저탄소 주철강 숏
涂料和相关产品应用前的钢基材的制备 - 金属喷砂清理磨料规范 - 第4部分:低碳铸钢射击

2019-12-12

现行

ISO 11124-4-2018

Preparation of steel substrates before application of paints and related products — Specifications for metallic blast-cleaning abrasives — Part 4: Low-carbon cast-steel shot
涂料和相关产品应用前的钢基材的制备 - 金属喷砂清理磨料规范 - 第4部分:低碳铸钢丸

2018-08-23

现行

GB/T 18838.4-2008

涂覆涂料前钢材表面处理 喷射清理用金属磨料的技术要求 第4部分: 低碳铸钢丸
Preparation of steel substrates before application of paints and related products-Specifications for metallic blast-cleaning abrasives - Part 4:Low-carbon cast-steel shot

2008-04-01

现行

KS M ISO 11124-3

도료 및 관련 제품의 도장 전 강철 소지 표면처리 — 금속 블라스트 세정용 연마제의 규격 — 제3부: 고탄소 주철강 숏과 그릿
涂料和相关产品应用前的钢基材的制备 - 金属喷砂清理磨料规范 - 第3部分:高碳铸钢球磨机

2019-12-12

现行

ISO 11124-3-2018

Preparation of steel substrates before application of paints and related products — Specifications for metallic blast-cleaning abrasives — Part 3: High-carbon cast-steel shot and grit
涂料和相关产品应用前的钢基材料的制备 - 金属喷砂清理磨料的规范 - 第3部分:高碳铸钢球磨机

2018-09-07

现行

GB/T 18838.3-2008

涂覆涂料前钢材表面处理 喷射清理用金属磨料的技术要求 第3部分: 高碳铸钢丸和砂
Preparation of steel substrates before application of paints and related products-Specifications for metallic blast-cleaning abrasives - Part 3: High-carbon cast-steel shot and grit

2008-04-01

现行

KS M ISO 11126-5

도료 및 관련 제품의 도장 전 철강 소지 표면처리 — 비금속 블라스트 세정 연마재 시방 — 제5부: 니켈 슬래그
涂料和相关产品使用前钢衬底的制备.非金属喷砂清理磨料规范.第5部分:镍渣

2021-04-26

现行

ISO 11126-5-2018

Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 5: Nickel slag
涂料和相关产品使用前钢衬底的制备.非金属喷砂清理磨料规范.第5部分:镍渣

2018-09-07

现行

ISO 11124-5-2019

Preparation of steel substrates before application of paints and related products — Specifications for metallic blast-cleaning abrasives — Part 5: Cut steel wire
涂料和相关产品使用前钢衬底的制备.金属喷砂清理磨料规范.第5部分:切割钢丝（ISO 11124-5-2019）

2019-05-29

现行

KS M ISO 11126-5(2017 Confirm)

도료와 관련제품의 도장 전 강판기재의 준비-비금속 블라스트 세정용 연마제의 시방-제5부:니켈 정제 슬래그
涂装油漆和相关产品前钢基体的制备？非金属喷砂清理磨料规范？第5部分:镍精炼渣

2002-12-31

现行

KS M ISO 11127-5(2018 Confirm)

도료와 관련 제품의 도장 전 철강 소지의 조정 — 비금속 블라스트 세정 연마재 시험 방법–제5부: 수분 측정
涂料和相关产品应用前的钢基材的制备 - 非金属喷砂清洁磨料的测试方法 - 第5部分:水分测定

2013-12-30

现行

KS M ISO 11127-5

도료와 관련 제품의 도장 전 철강 소지의 표면처리 — 비금속 블라스트 세정 연마재 시험방법 — 제5부: 수분 측정
涂料和相关产品使用前钢衬底的制备.非金属喷砂清理磨料的试验方法.第5部分:水分的测定

2021-04-26

现行

GB/T 17850.5-2017

涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第5部分：镍精炼渣
Preparation of steel substrates before application of paints and related products—Specifications for non-metallic blast-cleaning abrasives—Part 5:Nickel refinery slag

2017-12-29

现行

ISO 11127-5-2020

Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 5: Determination of moisture
涂料和相关产品应用前的钢基材的制备 - 非金属喷砂清洁磨料的测试方法 - 第5部分:水分测定

2020-10-09

现行

DIN EN ISO 11124-5

Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 5: Cut steel wire (ISO 11124-5:2019)
涂料和相关产品使用前钢衬底的制备.金属喷砂清理磨料规范.第5部分:切割钢丝（ISO 11124-5-2019）；德文版EN ISO 11124-5:2021

2021-07-01