本文件详细说明了设备一致性测试的标准化测试程序 采用时分多址（TDMA）的点对多点（P-MP）数字无线电中继系统。 可选地，对于本文件中定义的某些系统类型，其他访问方法（例如正交 OFDMA可以与另一个维度的TDMA结合使用 多址接入。为了在CEPT范围内实现ECC/DEC/（04）04[1]关于相互承认 在各个CEPT国家对设备进行一致性测试的结果。此外，程序 本文件中描述的与能够完成中描述的一致性评估程序相关 指令1999/5/EC[3]的第二章，以证明DRR符合相关要求 指令1999/5/EC[3]第3.2条中确定的基本要求。本文件旨在结合EN 301 126-2-1[2]和 描述TDMA方法的单个设备ENs/ETS将实现测试结果的通用性，无论 供应商或执行测试的通知机构。本文件中描述的一致性测试与直接要求的无线电特定参数有关 通过相关无线电中继ENs/ETS。与其他边界EN/ETS的一致性测试（例如系统输入/输出的一致性测试 接口和相关基带过程）不在本文件范围内。

The present document details standardized test procedures for conformance testing of equipment for Point-to-MultiPoint (P-MP) digital radio relay systems applying time division multiple access method (TDMA). Optionally, for certain of the system types defined in the present document, other access methods (e.g. Orthogonal Frequency Division Multiple Access (OFDMA)) may be used in conjunction with TDMA to provide another dimension of multiple access.Standardized procedures are required in order to fulfil ECC/DEC/(04)04 [1] on the mutual recognition, within CEPT, of the results of conformance tests on equipment carried out in individual CEPT Countries. Furthermore the procedures described in the present document are relevant to be able to fulfil the conformance assessment procedure described in Chapter II of the Directive 1999/5/EC [3] in order to demonstrate the compliance of the DRRS with the relevant Essential Requirements identified in Article 3.2 of the Directive 1999/5/EC [3].The present document is intended to be applied in conjunction with EN 301 126-2-1 [2] and in conjunction with the individual equipment ENs/ETSs describing TDMA methods and will enable commonality of test results, irrespective of the Supplier or the Notified Body carrying out the test.The conformance tests described in the present document are those related to radio specific parameters required directly by the relevant radio relay ENs/ETSs. Conformance tests to other boundary EN/ETS (e.g. those for system input/output interfaces and related base band process) are outside the scope of the present document.