SAE <PDF>J731_200708J1926/1_201609-通用和流体动力连接件.符合ASME B1的端口和螺柱端 1螺纹和O形密封圈.第1部分:截断壳体中带O形密封圈的螺纹端口-国家数字标准馆

现行 SAE J731_200708J1926/1_201609

到馆提醒

收藏跟踪

购买正版

Connections for General Use and Fluid Power - Ports and Stud Ends with ASME B1.1 Threads and O-Ring Sealing - Part 1: Threaded Port with O-Ring Seal in Truncated Housing 通用和流体动力连接件.符合ASME B1的端口和螺柱端 1螺纹和O形密封圈.第1部分:截断壳体中带O形密封圈的螺纹端口

发布日期： 2016-09-09

SAE J1926的本部分规定了符合ASME B1的带英制螺纹的流体动力和通用端口的尺寸。1用于SAE J1926-2和SAE J1926-3中所示的可调和不可调螺柱端。符合SAE J1926本部分要求的端口可在工作压力高达63 MPa时用于不可调节螺柱端部，在工作压力高达40 MPa时用于可调节螺柱端部。允许工作压力取决于材料、设计、工作条件、应用等。对于液压传动应用的新设计中规定的螺纹端口和螺柱端，只能使用ISO 6149。符合ISO 1179、ISO 9974和ISO 11926的螺纹端口和螺柱端不得用于液压传动应用中的新设计。

This part of SAE J1926 specifies dimensions for fluid power and general use ports with inch threads in accordance with ASME B1.1 for use with adjustable and nonadjustable stud ends shown in SAE J1926-2 and SAE J1926-3.Ports in accordance with this part of SAE J1926 may be used at working pressures up to 63 MPa for nonadjustable stud ends and up to 40 MPa for adjustable stud ends. The permissible working pressure depends upon materials, design, working conditions, application, etc.For threaded ports and stud ends specified in new designs for hydraulic fluid power applications, only ISO 6149 shall be used. Threaded ports and stud ends in accordance with ISO 1179, ISO 9974, and ISO 11926 shall not be used for new designs in hydraulic fluid power applications.

分类信息

发布单位或类别：美国-美国机动车工程师协会

关联关系

研制信息

相似标准/计划/法规

GB/T 19674.1-2005

液压管接头用螺纹油口和柱端--螺纹油口
Connections for general use and fluid power Ports and stud ends with thread-Threaded port

Pneumatic fluid power — Connections — Ports and stud ends
气压传动.连接.端口和螺柱端

GB/T 14038-2008

气动连接气口和螺柱端
Pneumatic fluid power - Connections - Ports and stud ends

GB/T 19674.3-2005

液压管接头用螺纹油口和柱端金属对金属密封柱端（B型）
Connections for general use and fluid power-Ports and stud ends with thread-Stud ends with metal-to-metal sealing(type B)

GB/T 19674.2-2005

液压管接头用螺纹油口和柱端--填料密封柱端（A型和E型）
Connections for general use and fluid power Ports and stud ends with thread-Stud ends with elastomeric sealing(A type and type E)

BS EN ISO 9974-1-2000

Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing-Threaded ports
一般用途和流体动力的连接端口和螺柱端部采用ISO 261螺纹采用弹性体或金属对金属密封

GB/T 43077.4-2023

液压传动连接普通螺纹平油口和螺柱端第4部分：六角螺塞
Connections for hydraulic fluid power—Ports and stud ends with general threads—Part 4: Hex plugs

BS EN ISO 1179-1-2013

Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing-Threaded ports
一般用途和流体动力的连接端口和螺柱端部采用ISO 228-1螺纹采用弹性体或金属对金属密封

BS EN ISO 9974-2-2000

Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing-Stud ends with elastomeric sealing (type E)
一般用途和流体动力的连接端口和螺柱端部采用ISO 261螺纹采用弹性体或金属对金属密封

ISO 9974-1-1996

Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 1: Threaded ports
通用和流体动力连接件——带ISO 261弹性体或金属对金属密封螺纹的端口和螺柱端第1部分:螺纹端口

BS EN ISO 9974-3-2000

Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing-Stud ends with metal-to-metal sealing (type B)
一般用途和流体动力的连接端口和螺柱端部采用ISO 261螺纹采用弹性体或金属对金属密封

ISO 11926-3-1995

Connections for general use and fluid power — Ports and stud ends with ISO 725 threads and O-ring sealing — Part 3: Light-duty (L series) stud ends
通用和流体动力连接件——带ISO 725螺纹和O形密封圈的端口和螺柱端第3部分:轻型（L系列）螺柱端

SAE J1926/3_202305

Connections for General Use and Fluid Power Ports and Stud Ends with ASME B1.1 Threads and O-Ring Sealing Part 3: Light-Duty (L-Series) Stud Ends
带ASME B1.1螺纹和O形密封圈的通用和流体动力端口和螺柱端的连接第3部分:轻型（L系列）螺柱端

SAE J1926/2_202303

Connections for General Use and Fluid Power Ports and Stud Ends with ASME B1.1 Threads and O-Ring Sealing - Part 2: Heavy-Duty (S Series) Stud Ends
具有ASME B1.1螺纹和O形密封圈的通用和流体动力端口和螺柱端的连接件.第2部分:重型（S系列）螺柱端

ISO 11926-2-1995

Connections for general use and fluid power — Ports and stud ends with ISO 725 threads and O-ring sealing — Part 2: Heavy-duty (S series) stud ends
通用和流体动力连接件——带ISO 725螺纹和O形密封圈的端口和螺柱端第2部分:重型（S系列）螺柱端

ISO 1179-1-2013

Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 1: Threaded ports
通用和流体动力连接件——带ISO 228-1弹性体或金属对金属密封螺纹的端口和螺柱端第1部分:螺纹端口

GB/T 2878.1-2011

液压传动连接带米制螺纹和O形圈密封的油口和螺柱端第1部分：油口
Connections for hydraulic fluid power - Ports and stud ends with metric threads and O-ring sealing - Part 1: Ports

ISO 9974-2-1996

Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 2: Stud ends with elastomeric sealing (type E)
通用和流体动力连接件——ISO 261螺纹弹性体或金属对金属密封端口和螺柱端第2部分:弹性体密封螺柱端（E型）

Pneumatic fluid power - Connections - Ports and stud ends (ISO 16030:2001 + Amd. 1:2005)
气压传动.连接.端口和螺柱端（ISO 16030-2001+Amd.1-2005）

ISO 9974-3-1996

Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 3: Stud ends with metal-to-metal sealing (type B)
通用和流体动力连接件——ISO 261螺纹弹性体或金属对金属密封端口和螺柱端第3部分:金属对金属密封螺柱端（B型）

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统