ISO 20083-2:2019-船舶和航海技术.通过测量轴变形测定船舶推进系统的轴功率.第2部分:光学反射法-国家数字标准馆

现行 ISO 20083-2:2019

到馆阅读

收藏跟踪

购买正版

Ships and marine technology — Determination of the shaft power of ship propulsion systems by measuring the shaft distorsion — Part 2: Optical reflection method 船舶和航海技术.通过测量轴变形测定船舶推进系统的轴功率.第2部分:光学反射法

发布日期： 2019-06-05

本文件规定了通过使用光学反射式装置测量轴变形来确定发动机船轴功率的程序。给出了测量原理、装置组成和计算方法。它还描述了确定测量精度的因素，包括校准程序，并规定了设备的车载文件。

This document specifies a procedure to determine the shaft power of engine ships, by measuring the shaft distortion using an optical reflection type device. It gives the principles of the measurement, the components of the device and the calculation method. It also describes the factors for determining the measuring accuracy, including the calibration procedure, and specifies the on-board documentation for the device.

分类信息

发布单位或类别：国际组织-国际标准化组织

ICS分类： 47.020.20造船和海上构筑物综合 - 船用发动机和推进系统

关联关系

研制信息

归口单位： ISO/TC 8/SC 2

相似标准/计划/法规

BS ISO 20083-2-2019

Ships and marine technology. Determination of the shaft power of ship propulsion systems by measuring the shaft distorsion-Optical reflection method
船舶和海洋技术通过测量轴偏差确定船舶推进系统的轴功率

BS ISO 20083-3-2019

Ships and marine technology. Determination of the shaft power of ship propulsion systems by measuring the shaft distorsion-Elastic vibration method
船舶和海洋技术通过测量轴偏差确定船舶推进系统的轴功率

GB/T 41894.3-2022

船舶与海上技术通过测量轴变形量确定船舶推进系统轴功率第3部分：弹性振动法
Ships and marine technology—Determination of the shaft power of ship propulsion systems by measuring the shaft distorsion—Part 3:Elastic vibration method

ISO 20083-3-2019

Ships and marine technology — Determination of the shaft power of ship propulsion systems by measuring the shaft distorsion — Part 3: Elastic vibration method
船舶和航海技术.通过测量轴变形测定船舶推进系统的轴功率.第3部分:弹性振动法

GB/T 41894.2-2022

船舶与海上技术通过测量轴变形量确定船舶推进系统轴功率第2部分：光学反射法
Ships and marine technology—Determination of the shaft power of ship propulsion systems by measuring the shaft distorsion—Part 2:Optical reflection method

ISO 7496-2-2022

Ships and marine technology — Vocabulary on inland navigation vessels — Part 2: Ship’s shaftings
船舶和海洋技术.内河航行船舶词汇.第2部分:船舶轴系

Ships and marine technology — Marine evacuation systems — Determination of capacity
船舶和海洋技术 - 海洋疏散系统 - 容量的确定

BS ISO 16707-2016

Ships and marine technology. Marine evacuation systems. Determination of capacity
船舶和海洋技术海上疏散系统容量的确定

GOST R 58827-2020

Суда и морские технологии. Морские эвакуационные системы. Определение пропускной способности
船舶和船舶技术海上撤离系统容量的确定

Ships and marine technology — High holding power balance anchors
船舶和海上技术.高持力平衡锚

BS ISO 24061-2021

Ships and marine technology. High holding power balance anchors
船舶和海洋技术高持力平衡锚

선박 및 해양 기술 - 프로펠러 축 회전 표시기 - 전기식 및 전자식
船舶和海洋技术 - 螺旋桨轴革命指标 - 电气类型和电子类型

KS V ISO 22554(2022 Confirm)

선박 및 해양 기술 - 프로펠러 축 회전 표시기 - 전기식 및 전자식
船舶和海上技术.传动轴旋转指示器.电气型和电子型

Ships and marine technology — Propeller shaft revolution indicators — Electric type and electronic type
船舶和航海技术传动轴转速表电动式和电子式

GB/T 30369-2013

船舶和海上技术螺旋桨轴转数指示器电气型和电子型
Ships and marine technology―Propeller shaft revolution indicators―Electric type and electronic type

Ships and marine technology — Verification method for portable power measurement using a strain gauge
软焊剂 - 测试方法 - 第2部分:非挥发物质的测定沸点测定法

GB/T 41889-2022

船舶与海上技术应变仪便携式测功法的验证方法
Ships and marine technology—Verification method for portable power measurement using a strain gauge

BS ISO 23048-2018

Ships and marine technology. Verification method for portable power measurement using a strain gauge
船舶和海洋技术用应变计进行便携式功率测量的验证方法

Ships and marine technology — Guidelines for the assessment of speed and power performance by analysis of speed trial data
船舶与海洋技术 - 速度试验数据分析速度与功率性能评估指南

BS ISO 15016-2015

Ships and marine technology. Guidelines for the assessment of speed and power performance by analysis of speed trial data
船舶和海洋技术通过分析速度试验数据评估速度和功率性能的指南

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统