IEC 62717:2014+A1:2015+A2:2019规定了LED模块的性能要求，以及证明符合本标准所需的测试方法和条件。第一版取消并取代了2011年发布的IEC PAS 62717。本版构成技术修订版。此版本包括以下与IEC PAS 62717相关的重大技术变更: -所有术语和定义均符合IEC 62504和CIE的相关文件。例如，像“额定值”这样的通用术语被转移到IEC 62504。 -包括关于人群适用性的声明。 -完成规范性参考文献并清除未使用的标准。 -关于EMC，给出了谐波电流的参考。 -对标准的大多数部分都有影响的变化是将失效机制分为突然失效和光通量衰减。因此，引入了新的术语和定义、管腔维护的新要求以及附件C的全新结构和内容。 -进行从tpmax到tprated的转换，背景是不存在一个tpmax，而是结合寿命选择tp(额定)值。 -标记位置（产品、包装、数据表）发生变化，并且由于故障机制的拆分，列出了新的参数。此外，耐久性测试(温度的上升速度)的变化反映在标记中。 -引入了位移因子的概念，而不是功率因数。这导致了新的定义、要求和附件E和F。 -对发光功效的要求发生了变化。 -审查与家庭概念相关的要求。-删除基于置信区间的统计数据。这涉及LED模块功率和光通量的要求和限制以及附录E的删除。 -引入了管腔维护的新要求。 -作为耐久性测试的一部分，加速操作寿命测试后的最大光照下降现在是固定的。 -关于型式试验和样本量的讨论，试验样品中的件数大幅减少，见表7。 -关于测量方法的附件A被完全重组和审查，例如用于环境温度和在进行后续光输出测量时缩短稳定时间。 -对于电特性，老化时间可以选择为500h。 -对于光度数据文件格式，参考IEC 62722-1. -纠正了光度编码（附录D）中的错误。 -删除关于优化测试持续时间的附件G；相反，应发布INF表。 -从灯具标准中接管了关于“温度测量测试设备”的新附录H。 -最后，更新参考书目。 该合并版本由第一版（2017年）、修正案1（2015年）和修正案2（2019年）组成。因此，除本出版物外，无需下令修订。

IEC 62717:2014+A1:2015+A2:2019 specifies the performance requirements for LED modules, together with the test methods and conditions, required to show compliance with this standard. This first edition cancels and replaces IEC PAS 62717 published in 2011. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to IEC PAS 62717:
- all terms and definitions are aligned with IEC 62504 and relevant documents of CIE. For example, general terms like "rated value" are shifted to IEC 62504.
- a statement on the applicability on a population is included.
- the normative references are completed and cleaned from standards that are not in use.
- with regard to EMC, references to harmonic currents are given.
- the change, which has an effect on most parts of the standard, is the split of failure mechanisms into abrupt failures and luminous flux depreciation. Consequently, new terms and definitions, new requirements for lumen maintenance and a complete new structure and contents of Annex C are introduced.
- transition from tpmax to tprated is made, with the background that there is not one tpmax, but a choice of tp(rated) values, in combination with lifetime.
- places where to mark (product, packaging, data sheets) are changed, and as a consequence of the split of failure mechanisms, new parameters are listed. Further, changes in the endurance test (ramping speed of temperature) are reflected in marking.
- the concept of displacement factor instead of power factor is introduced. This led to new definitions, requirements and Annexes E and F.
- the requirements on luminous efficacy are changed.
- the requirements, associated with the family concept are reviewed.
- statistics, based on confidence intervals are removed. This concerns requirements and limits for LED module power and luminous flux and deletion of Annex E.
- new requirements for lumen maintenance are introduced.
- as part of the endurance test, the maximum light decrease after accelerated operation life test is now fixed.
- with regard to the discussion on type test and sample size, the number of pieces in a test sample is drastically reduced, see Table 7.
- Annex A on measuring methods is completely restructured and reviewed, for example for ambient temperature and for shortening of stabilisation time when conducting subsequent light output measurements.
- for electrical characteristics, the ageing time may be chosen as 500 h.
- for photometric data file formats, reference is given to IEC 62722-1.
- mistakes in the photometric code (Annex D) are corrected.
- Annex G on optimised test duration is removed; instead, an INF sheet shall be published.
- from the luminaire standard, a new Annex H on "Test equipment for temperature measurement" is taken over.
- finally, the Bibliography is updated.
This consolidated version consists of the first edition (2017), its amendment 1 (2015) and its amendment 2 (2019). Therefore, no need to order amendment in addition to this publication.