现行

MIL MS90729A Notice 1-Validation 1

BOLT, TEE HEAD (SUPERSEDING MS90729)
BOLT TEE HEAD（取代MS90729）

1988-06-06

现行

MIL MIL-B-8831B Amendment 1

BOLT, 180 KSI FTU & 180 KSI FSU, 450 DEG F PROTRUDING & FLUSH HEAD, GENERAL SPECIFICATION FOR (SUPERSEDING MIL-B-8831A) (S/S BY NASM8831)
BOLT 180 KSI FTU

1983-03-09

现行

MIL MS35801A Notice 1-Inactivation

BOLT, LAG, FETTER DRIVE HOT GALVANIZED (POLE-LINE) (SUPERSEDING MS35801)
BOLT LAG FETTER DRIVE HOT GALVANIZED（POLE-LINE）（取代MS35801）

1999-11-18

现行

MIL MS9401 Notice 1-Inactivation

BOLT, TEE HEAD - AMS 6322, CHAMFERED,.4375-20 UNJF-3A, CADMIUM PLATE (ASG)
BOLT TEE HEAD - AMS 6322 CHAMFERED .4375-20 UNJF-3A CADMIUM PLATE（ASG）

1996-01-31

现行

ADS AS5379

Stop Bolt (called for on AS5378)
止动螺栓（AS5378要求）

1951-10-02

现行

GOST 16898-1971

Пальцы установочные с упором. Конструкция
固定螺栓停止 设计

现行

MIL MIL-S-43770/5 Notice 1-Validation

SNAP HOOK, CAST BODY, FIXED EYE, SLIDING BOLT CLOSURE (S/S BY NASM43770/5-1999)
SNAP HOOK CAST BODY FIXED EYE SLIING BOLT CLOSURE（S/S BY NASM43770/5-1999）

1988-02-12

现行

MIL MIL-S-43770/6 Notice 1-Validation

SNAP HOOK, CAST BODY, SWIVEL EYE, SLIDING BOLT CLOSURE (S/S BY NASM43770/6-1999)
SNAP HOOK CAST BODY SWIVEL EYE SLIING BOLT CLOSURE（S/S BY NASM43770/6-1999）

1988-02-12

现行

GOST 16899-1971

Пальцы установочные срезанные с упором. Конструкция
固定剪切螺栓停止 设计

现行

MIL MS9397 Notice 1-Cancellation

BOLT,TEE HEAD - AMS 6322, CHAMFERED,.190-32 UNJF-3A, CADMIUM PLATE(ASG) (S/S BY SAE-AS9397A)
BOLT TEE HEAD - AMS 6322 CHAMFERED .190-32 UNJF-3A CADMIUM PLATE（ASG）（S/S BY SAE-AS9397A）

2000-08-31

现行

MIL MS9497C Notice 1-Cancellation

BOLT, MACHINE - HEXAGON HEAD, FULL SHANK, AMS 5731,.750-16 UNJF-3A (NO S/S DOCUMENT) (SUPERSEDING MS9497B)
BOLT MACHINE - HEXAGON HEAD FULL SHANK AMS 5731 .750-16 UNJF-3A（NO S/S DOCUMENT）（取代MS9497B）

1991-02-15

现行

MIL MS9656B Notice 1-Cancellation

BOLT, MACHINE-HEXAGON HEAD, FULL SHANK, TITANIUM, AMS 4967, 500-20 UNJF-3A (NO S/S DOCUMENT) (SUPERSEDING MS9656A)
BOLT MACHINE-HEXAGON HEAD FULL SHANK TITANIUM AMS 4967 500-20 UNJF-3A（NO S/S DOCUMENT）（取代MS9656A）

1991-02-15

现行

MIL MS9529 Amendment 1

BOLT, MACHINE, STEEL, AMS 6322, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD,.190-32 UNJF-3A (S/S BY SAE-AS9529)
BOLT MACHINE STEEL AMS 6322 CADMIUM PLATE 钻孔 1孔 HEXAGON HEAD .190-32 UNJF-3A（S/S BY SAE-AS9529）

1996-04-29

现行

MIL MIL-B-70332/3

BRACKET, STOP (BOLT ASSEMBLY, CLAMP) (NO S/S DOCUMENT)
支架、止动块（螺栓组件、夹具）（无S/S文件）

1984-05-25

现行

MIL MIL-B-70332/3 Notice 1-Cancellation

BRACKET, STOP (BOLT ASSEMBLY, CLAMP) (NO S/S DOCUMENT)
止动器支架（螺栓组件、夹具）（无S/S文件）

1995-10-26

现行

MIL MS51107B Notice 1-Validation

SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), SHANK DRILLED FOR COTTER PIN, ALLOY STEEL, GRADE 8, PHOSPHATE COATED, UNC-2A (SUPERSEDING MS51107A)
螺丝 CAP HEXAGON头（精加工HEXAGON BOLT） 用于铜针的合金钢 等级8 磷酸氢钙 UNC-2A（取代MS51107A）

1988-05-20

现行

MIL MS9678B Amendment 1

BOLT, MACHINE-CRES, AMS 5731, DOUBLE HEXAGON, EXTENDED WASHER HEAD, CUP WASHER LOCKED,.3125-24 UNJF-3A (SUPERSEDING MS9678A) (S/S BY SAE-AS9678)
BOLT MACHINE-CRES AMS 5731 DOUBLE HEXAGON 扩展洗衣机头 洗衣机锁定 .3125-24 UNJF-3A（取代MS9678A）（S/S BY SAE-AS9678）

1996-04-29

现行

DIN 4522-3

Photographic lenses; exposure stop (e-stop)
摄影镜头；曝光停止（紧急停止）

1991-01-01

现行

GOST 18738-1980

Упоры к шаговым ножам. Конструкция и размеры
停止停止切割刀片 设计和尺寸

现行

ADS AS2288

Drum Stop
鼓点

1943-02-18