本文件规定了试样的制备方法以及测定聚丁烯-1（PB-1）模塑和挤压材料性能所用的试验方法。为简单起见，本文件中使用了名称聚丁烯-1和缩写PB。还规定了处理试验材料的要求，以及成型前试验材料和试验前试样的调节要求。 给出了制备试样的程序和条件，以及测量制备试样所用材料性能的程序。 列出了表征PB-1模塑和挤出材料的合适和必要的性能和试验方法。 这些性能是从ISO 10350-1中的通用试验方法中选择的。中国的其他试验方法 这些模塑和挤压材料的广泛用途或对其具有特殊意义的用途也包括在内 本文件是ISO 21302-1中规定的指定属性。 为了获得可重复和可比较的试验结果，拟采用本文件中规定的试样制备和调节方法、试样尺寸和试验程序。 确定的值不一定与使用不同尺寸的试样或使用不同程序制备的试样获得的值相同。交叉引用:ISO 899-1IEC 60296ISO 21302-1ISO 179-2ISO 291ISO 11357-2IEC 60243-1ISO 2818ISO 1183-3IEC 62631-3-2ISO 10350-1ISO 4589-2ISO 293ISO 1183-2IEC 62631-2-1ISO 75-2IEC 62631-3-1ISO 8256IEC 60695-11-10ISO 62ISO 1183-1ISO 11357-3ISO 11357-6ISO 1628-3ISO 179-1ISO 20753IEC 60112ISO 1133-1ISO 527-2ISO 1787-2ISO购买时所有当前的修改件都包括在内这份文件。

This document specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of polybutene-1 (PB-1) moulding and extrusion materials. For the sake of simplicity, the designation polybutene-1 and the abbreviation PB are used in this document. Requirements for handling test material and for conditioning both the test material before moulding and the specimens before testing are also specified. Procedures and conditions for the preparation of test specimens and procedures for measuring properties of the materials from which these specimens are made are given. Properties and test methods which are suitable and necessary to characterize PB-1 moulding and extrusion materials are listed. The properties have been selected from the general test methods in ISO 10350-1. Other test methods in wide use for or of particular significance to these moulding and extrusion materials are also included in this document, as is the designatory property specified in ISO 21302-1. In order to obtain reproducible and comparable test results, it is intended to use the methods of specimen preparation and conditioning, the specimen dimensions and the test procedures specified in this document. Values determined will not necessarily be identical to those obtained using specimens of different dimensions or prepared using different procedures.Cross References:ISO 899-1IEC 60296ISO 21302-1ISO 179-2ISO 291ISO 11357-2IEC 60243-1ISO 2818ISO 1183-3IEC 62631-3-2ISO 10350-1ISO 4589-2ISO 293ISO 1183-2IEC 62631-2-1ISO 75-2IEC 62631-3-1ISO 8256IEC 60695-11-10ISO 62ISO 1183-1ISO 11357-3ISO 11357-6ISO 1628-3ISO 179-1ISO 20753IEC 60112ISO 1133-1ISO 527-2ISO 178All current amendments available at time of purchase are included with the purchase of this document.