首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 ASTM F1334-24
到馆提醒
收藏跟踪
购买正版
Standard Test Method for Determining A-Weighted Sound Power Level of Vacuum Cleaners 测定真空吸尘器A加权声功率级的标准试验方法
发布日期: 2024-01-01
1.1 本试验方法计算小型便携式立式、筒式、组合式真空吸尘器、背包式吸尘器、硬地板清洁机、提取器和中央真空吸尘器电动喷嘴发出的总A加权声功率水平,这些喷嘴用于家庭和商业应用。 1.1.1 要确定动力装置位置的中央真空的声功率级,请参阅测试方法 F2544 . 1.2 A加权声压测量是在半混响室中的固定式真空吸尘器、提取器、硬地板清洁机或背包式吸尘器上进行的。该测试方法通过小噪声源的比较方法确定声功率,即与宽带参考声源的比较。 1.3 本试验方法描述了确定小噪声源的近似a加权声功率水平的程序。 此测试方法使用非特殊的半混响室。 1.4 结果表示为A加权声功率级,单位为分贝(参考1皮瓦)。 1.5 以英寸磅为单位的数值应视为标准。括号中的值仅供参考。 注1: F11.21小组委员会正在地毯行业的协助下,积极寻求与新市场相关的地毯。尽管毛绒和Freize地毯面板不再可供购买,但一些实验室可能仍有样品可供测试。在这种情况下,表值仍然有效。 1.6 本标准并不旨在解决与其使用相关的所有安全问题(如有)。本标准的使用者有责任在使用前制定适当的安全、健康和环境实践,并确定监管限制的适用性。 1.7 本国际标准是根据世界贸易组织技术性贸易壁垒委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认的标准化原则制定的。 ====意义和用途====== 4.1 当在该测试方法的条件下进行测试时,测试结果能够比较真空吸尘器、背包式真空吸尘器,提取器或硬地板清洁机的A加权声音发射。
1.1 This test method calculates the overall A-weighted sound power level emitted by small portable upright, canister, combination vacuum cleaners, backpack vacuum cleaners, hard-floor cleaning machines, extractors, and central vacuum cleaner motorized nozzles intended for operation in domestic and commercial applications. 1.1.1 To determine the Sound Power Level of a central vacuum at the power unit location refer to Test Method F2544 . 1.2 A-weighted sound pressure measurements are performed on a stationary vacuum cleaner, extractor, hard-floor cleaning machine, or backpack vacuum cleaner in a semi-reverberant room. This test method determines sound power by a comparison method for small noise sources, that is, comparison to a broadband reference sound source. 1.3 This test method describes a procedure for determining the approximate A-weighted sound power level of small noise sources. This test method uses a non-special semi-reverberant room. 1.4 Results are expressed as A-weighted sound power level in decibels (referenced to one picowatt). 1.5 The values stated in inch-pound units are to be regarded as the standard. The values in parentheses are for information only. Note 1: The F11.21 subcommittee is actively pursuing new market relevant carpets with the assistance of the carpet industry. Although plush and Freize carpet panels are no longer available for purchase, some laboratories may still have samples for testing. In such cases, the table values remain valid. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 4.1 The test results enable the comparison of A-weighted sound emission from vacuum cleaners, backpack vacuum cleaners, extractors, or hard-floor cleaning machines when tested under the condition of this test method.
分类信息
关联关系
研制信息
归口单位: F11.25
相似标准/计划/法规
现行
ASTM F2544-11(2024)
Standard Test Method for Determining A-Weighted Sound Power Level of Central Vacuum Power Units
测定中央真空动力装置A计权声功率级的标准试验方法
2024-07-01
现行
ASTM E1573-22
Standard Test Method for Measurement and Reporting of Masking Sound Levels Using A-Weighted and One-Third-Octave-Band Sound Pressure Levels
使用A加权和三分之一倍频程声压级测量和报告掩蔽声级的标准试验方法
2022-06-01
现行
BS EN ISO 3741-2010
Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Precision methods for reverberation test rooms
声学利用声压测定噪声源的声功率级和声能级 混响试验室的精度方法
2010-10-31
现行
GB/T 6881-2023
声学 声压法测定噪声源声功率级和声能量级 混响室精密法
Acoustics—Determination of sound power levels and sound energy levels of noise sources using sound pressure—Precision methods for reverberation test rooms
2023-09-07
现行
KS I ISO 3741
음향 — 음압법에 의한 소음원의 음향파워 레벨과 음향에너지레벨 측정방법 —잔향실에서의 정밀 측정방법
声学.用声压测定噪声源的声功率级和声能级.混响试验室的精确方法
2022-09-13
现行
GOST R ISO 3741-2013
Акустика. Определение уровней звуковой мощности и звуковой энергии источников шума по звуковому давлению. Точные методы для реверберационных камер
声学 使用声压确定噪声源的声功率级和声能级 混响测试室的精密方法
现行
ISO 3741-2010
Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for reverberation test rooms
声学——使用声压测定噪声源的声功率级和声能级——混响试验室的精度方法
2010-09-21
现行
ASTM E1124-10(2024)
Standard Test Method for Field Measurement of Sound Power Level by the Two-Surface Method
通过双面法测量声功率级的标准测试方法
2024-10-01
现行
BS ISO 13347-4-2004
Industrial fans. Determination of fan sound power levels under standardized laboratory conditions-Sound intensity method
工业风扇 标准化实验室条件下风扇声功率级的测定
2008-04-30
现行
ASA S12.12-1992(R2020)
American National Standard for Engineering Method for the Determination of Sound Power Levels of Noise Sources Using Sound Intensity.
美国国家标准《用声强测定噪声源声功率级的工程方法》
1992-01-27
现行
BS ISO 16902-1-2003
Hydraulic fluid power. Test code for the determination of sound power levels using sound intensity techniques. Engineering method-Pumps
液压传动 用声强技术测定声功率级的试验规程 工程方法
2003-07-16
现行
ASA S12.51-2012/ISO 3741-2010(R2020)
American National Standard for Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for reverberation test rooms (a nationally adopted international standard).
美国声学国家标准.声压法测定噪声源的声功率级和声能级.混响试验室的精确方法(国家采用的国际标准)
2012-02-23
现行
ISO 13347-4-2004
Industrial fans — Determination of fan sound power levels under standardized laboratory conditions — Part 4: Sound intensity method
工业风扇——标准化实验室条件下风扇声功率级的测定第4部分:声强法
2004-08-17
现行
KS B ISO 13347-4
산업용 송풍기 — 표준 시험 조건에서의 송풍기 음향 파워 레벨 결정 —제4부 : 음향 세기 방법
工业风扇 - 标准实验室条件下风扇声功率级别的测定 - 第4部分:声强度法
2020-11-24
现行
ASA S12.57-2011/ISO 3747-2010(R2020)
American National Standard for Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure -Engineering/survey methods for use in situ in a reverberant environment
美国声学国家标准.声压法测定噪声源的声功率级和声能级.混响环境中现场使用的工程/测量方法
2011-08-11
现行
ISO 16902-1-2003
Hydraulic fluid power — Test code for the determination of sound power levels of pumps using sound intensity techniques: Engineering method — Part 1: Pumps
液压流体动力——用声强技术测定泵声功率级的试验规程:工程方法第1部分:泵
2003-05-20
现行
BS 10/30094845 DC
BS ISO 3745. Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Precision methods for anechoic test rooms and hemi-anechoic test rooms
BS ISO 3745 声学利用声压测定噪声源的声功率级和声能级 消声试验室和半消声试验室的精度方法
2010-06-17
现行
BS EN ISO 3743-1-2010
Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Engineering methods for small movable sources in reverberant fields-Comparison method for a hard-walled test room
声学利用声压测定噪声源的声功率级和声能级 混响场中小型移动源的工程方法
2010-10-31
现行
GB/T 6881.2-2017
声学 声压法测定噪声源声功率级和声能量级 混响场内小型可移动声源工程法 硬壁测试室比较法
Acoustics—Determination of sound power levels and sound energy levels of noise sources using sound pressure—Engineering methods for small movable sources in reverberant fields—Comparison method for a hard-walled test room
2017-11-01
现行
BS ISO 13347-2-2004
Industrial fans. Determination of fan sound power levels under standardized laboratory conditions-Reverberant room method
工业风扇 标准化实验室条件下风扇声功率级的测定
2006-12-29