CSA序言这是CAN/CSA-C61000-4-6的第二版，电磁兼容性（EMC）-第4-6部分:测试和测量技术-射频场感应的传导干扰抗扰度，这是对标题相同的IEC（国际电工委员会）标准61000-4-6（版本2:2003，合并修订件1:2004和修订件2:2006）的采用，无需修改。它取代了2001年出版的第一版CAN/CSA-CEI/IEC 61000-4-6（采用CEI/IEC 1000-4-6:1996）。1范围和目标IEC 61000-4的这一部分涉及电气和电子设备对频率范围为9 kHz至80 MHz的预期射频（RF）发射机产生的电磁干扰的传导抗扰度要求。不包括至少没有一根可将设备耦合到干扰射频场的导电电缆（如电源、信号线或接地连接）的设备。 注1:本部分规定了测试方法，用于测量电磁辐射引起的传导干扰信号对相关设备的影响。这些传导干扰的模拟和测量对于定量确定影响来说不够精确。定义的测试方法的主要目的是在各种设施中建立足够的结果重复性，以便对影响进行定量分析。本标准的目的是建立一个通用参考，用于评估电气和电子设备在受到射频场诱发的传导干扰时的功能抗扰度。IEC 61000本部分中记录的试验方法描述了评估设备或系统对特定现象的抗扰度的一致方法。注2:如IEC指南107所述，这是供IEC产品委员会使用的基本EMC出版物。 正如指南107中所述，IEC产品委员会负责确定是否应采用该抗扰度测试标准，如果采用，则负责确定适当的测试水平和性能标准。TC 77及其下属委员会准备与产品委员会合作，评估其产品特定抗扰度测试的价值。

CSA PrefaceThis is the second edition of CAN/CSA-C61000-4-6, Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields, which is an adoption without modification of the identically titled IEC (International Electrotechnical Commission) Standard 61000-4-6 (edition 2:2003 consolidated with amendment 1:2004 and amendment 2:2006). It supersedes the first edition published in 2001 as CAN/CSA-CEI/IEC 61000-4-6 (adopted CEI/IEC 1000-4-6:1996).1 Scope and objectThis part of IEC 61000-4 relates to the conducted immunity requirements of electrical and electronic equipment to electromagnetic disturbances coming from intended radio-frequency (RF) transmitters in the frequency range 9 kHz up to 80 MHz. Equipment not having at least one conducting cable (such as mains supply, signal line or earth connection) which can couple the equipment to the disturbing RF fields is excluded.NOTE 1 Test methods are defined in this part for measuring the effect that conducted disturbing signals, induced by electromagnetic radiation, have on the equipment concerned. The simulation and measurement of these conducted disturbances are not adequately exact for the quantitative determination of effects. The test methods defined are structured for the primary objective of establishing adequate repeatability of results at various facilities for quantitative analysis of effects.The object of this standard is to establish a common reference for evaluating the functional immunity of electrical and electronic equipment when subjected to conducted disturbances induced by radio-frequency fields. The test method documented in this part of IEC 61000 describes a consistent method to assess the immunity of an equipment or system against a defined phenomenon.NOTE 2 As described in IEC Guide 107, this is a basic EMC publication for use by product committees of the IEC. As also stated in Guide 107, the IEC product committees are responsible for determining whether this immunity test standard should be applied or not, and if applied, they are responsible for determining the appropriate test levels and performance criteria. TC 77 and its sub-committees are prepared to co-operate with product committees in the evaluation of the value of particular immunity tests for their products.