本文件规定了试样的制备方法和使用的试验方法 用于测定苯乙烯-丙烯腈（SAN）模塑和挤出材料的性能。它给 试验前处理试验材料和调节试验材料的要求 试验前，对试件进行模塑处理。 本文件给出了制备试样和程序的程序和条件 用于测量制作这些试样的材料的性能。它列出了属性和 适用于表征SAN模塑和挤压材料的必要试验方法。 这些性能是从ISO 10350-1中的通用试验方法中选择的。中国的其他试验方法 还包括对这些模塑和挤压材料的广泛使用或特别重要的用途 在本文件中，ISO 19064-1中规定的指定属性也是如此。 试样制备和调节方法、试样尺寸和试验 本文件中规定的程序用于获得可重复性和可比性试验 后果测定的值并不总是与使用不同材料的试样获得的值相同 尺寸或使用不同的程序准备。交叉引用:ISO 1183- 3）ISO 166 6 6 6 6 6 6 6 6 4 4 4 4 4 4 4 4 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 ISO ISO 3 3 3 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 ISO ISO 3 3 3 3 3 3 3 3 3 3 3 3 3 ISO 3 3 3 3 3 3 3 3 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 ISO ISO 8 8 ISO ISO 8 8 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 IEC 62631-3-1ISO 1183-2ISO 11357-1购买时可用的所有现行修订版包括在购买本文件时。

This document specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of styrene-acrylonitrile (SAN) moulding and extrusion materials. It gives the requirements for handling the test material and for conditioning both the test material before moulding and the specimens before testing. This document gives procedures and conditions for the preparation of test specimens and procedures for measuring properties of the materials from which these specimens are made. It lists properties and test methods which are suitable and necessary to characterize SAN moulding and extrusion materials. The properties have been selected from the general test methods in ISO 10350-1. Other test methods in wide use for, or of particular significance to, these moulding and extrusion materials are also included in this document, as are the designatory properties specified in ISO 19064-1. The methods of specimen preparation and conditioning, the specimen dimensions and the test procedures specified in this document are used in order to obtain reproducible and comparable test results. Values determined are not always identical to those obtained using specimens of different dimensions or prepared using different procedures.Cross References:ISO 1183-3ISO 4589-2ISO 4581ISO 179-1ISO 4589-3ISO 1656IEC 60112ISO 179-2ISO 306ISO 8256ISO 75-2IEC 60296IEC 62631-3-2IEC 62631-2-1ISO 899-1ISO 20753IEC 60243-1ISO 294-1ISO 1183-1ISO 2561ISO 11357-2ISO 2818ISO 293ISO 19064-1ISO 527-4ISO 62ISO 527-2ISO 180ISO 75-1IEC 60695-11-10ISO 1133-1ISO 178ISO 10350-1ISO 294-3IEC 62631-3-1ISO 1183-2ISO 11357-1All current amendments available at time of purchase are included with the purchase of this document.