BS ISO 18888:2017规定了燃气轮机驱动的联合循环和热电联产发电厂热性能试验的准备、实施、评估和报告的标准规则，用于在有或无补充燃烧的基础和部分负荷运行。本文件适用于一般信息的热性能试验，用于确定与合同保证有关的联合循环电厂性能的热验收试验，以及用于检查联合循环和热电联产电厂性能差异的对比试验，用于改造、升级或大修前后的试验。在规定的测试边界内的特定操作和参考条件下，它可用于确定以下热性能测试目标和预期值:电功率输出；热耗率或热效率；工艺蒸汽和/或区域供热，不通过蒸汽发生器产生电力输出 涡轮本文件不适用于相应标准涵盖的单个设备组件测试。它不适用于以下测试目标:环境测试，例如排放、噪声；振动测试；操作测试；专用标准（如燃气轮机）涵盖的联合循环特定部件的绝对或比较性能。交叉引用:ISO 12185:1996ISO 9951:1993ISO 10715:1997ASTM D1945-14ISO 2314:2009ASTM D4809-13ISO 12213-2:2006 Ed 2ISO/IEC 17025:2005ISO 6975:1997ASTM D4868-17ISO 6974-1:2012ISO 5167（所有部分）ISO 6976:2016ASTM D4052-16DIN 51900-1:2000（E）ISO 17089-1:2010 Ed 1ISO 20765-1:2005 Ed 1ISO 10790:2015 ED3ISO 3675:1998IEC 60584（所有部分）9906:2012IEC 60751:2008ISO 11086:1996IEC 60953-2:1990ISO 3977-9:1999ISO 3977-1:1997ISO 12242:2012ISO 2533ISO/IEC/IEEE 60559:2011 Ed 1购买本文件时提供的所有当前修订版均包含在购买本文件中。

BS ISO 18888:2017 specifies standard rules for preparing, conducting, evaluating and reporting thermal performance tests on combined cycle and cogeneration power plants driven by gas turbines for base and part load operation with or without supplementary firing.This document is applicable tothermal performance tests for general information,thermal acceptance tests for determining the performance of the combined cycle plant in relation to a contractual guarantee, andcomparative tests designed to check the performance differentials of the combined cycle and cogeneration power plants, for testing before and after modifications, upgrades or overhauls.It can be used to determine the following thermal performance test goals and expected values, under specific operating and reference conditions within defined test boundaries:electrical power output;heat rate or thermal efficiency;process steam and/or district heat w/o generation of electrical power output by means of a steam turbine.This document does not apply to individual equipment component testing, which is covered by corresponding standards.It is not intended to be applied to the following test goals:environmental testing for example emissions, noise;vibration testing;operational testing;absolute or comparative performance of specific components of the combined cycle covered by dedicated standards (e.g. gas turbines).Cross References:ISO 12185:1996ISO 9951:1993ISO 10715:1997ASTM D1945 - 14ISO 2314:2009ASTM D4809 - 13ISO 12213-2:2006 Ed 2ISO/IEC 17025:2005ISO 6975:1997ASTM D4868 - 17ISO 6974-1:2012ISO 5167 (all parts)ISO 6976:2016ASTM D4052 - 16DIN 51900-1:2000 (E)ISO 17089-1:2010 Ed 1ISO 20765-1:2005 Ed 1ISO 10790:2015 ED3ISO 3675:1998IEC 60584 (all parts)IEC 60034POWER2015-49216:2015IAPWS-IF97ISO 9906:2012IEC 60751:2008ISO 11086:1996IEC 60953-2:1990ISO 3977-9:1999ISO 3977-1:1997ISO 12242:2012ISO 2533ISO/IEC/IEEE 60559:2011 Ed 1All current amendments available at time of purchase are included with the purchase of this document.