1.1本试验方法涵盖使用偏光法或折光法原理测量退火和热强化或钢化玻璃中应力的表面应力测量装置的校准或校准验证。 1.2本试验方法是非破坏性的。 1.3本试验方法使用透射光，因此适用于透光眼镜。 1.4本试验方法不适用于化学钢化玻璃。 1.5使用所述程序，只能在浮法玻璃的“锡”侧测量表面应力。 1.6 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全和健康实践，并确定监管限制的适用性。

1.1 This test method covers calibration or verification of calibration or both, of surface-stress measuring devices used to measure stress in annealed and heat-strengthened or tempered glass, using polariscopic or refractometry based principles. 1.2 This test method is nondestructive. 1.3 This test method uses transmitted light, and therefore, is applicable to light-transmitting glasses. 1.4 This test method is not applicable to chemically tempered glass. 1.5 Using the procedure described, surface stresses can be measured only on the "tin" side of float glass. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.