BS EN 10273:2016规定了可焊接热轧钢筋的交货技术条件 用于高温的压力设备的结构，其厚度如 表5。EN 10021中的一般技术交付条件也适用于根据 用这个欧洲标准。注:本欧洲标准在《欧盟官方公报》（OJEU）上发布后 指令2014/68/EC，符合指令基本安全要求（ESR）的推定 2014/68/EC仅限于本欧洲标准中材料的技术数据，并不假定材料适用于特定设备。因此，需要根据该特定设备的设计要求对本材料标准中规定的技术数据进行评估，以验证是否满足压力设备指令的ESRs。 交叉引用:EN 10020:2000EN 10021EN 10027-1EN 10027-2EN 10052:1993EN 10058EN 10059EN 10060EN 10061EN 10079:2007EN 10168:2004EN 10204:2004EN 10221:1995EN 10308EN ISO 148-1:2010ISO 148-1:2009EN ISO 377EN ISO 6892-1:2009EN ISO 6892-2:2011EN ISO 14284ISO 14284ISO 14284CEN/TR 102612014/68/EUEN 1011-1EN 10314ISO 6303购买本文件时包括购买费用。

BS EN 10273:2016 specifies the technical delivery conditions for hot rolled weldable steel bars for the construction of pressure equipment for use at elevated temperatures with thicknesses given in Table 5.The general technical delivery conditions in EN 10021 also apply to products supplied in accordance with this European Standard.NOTE Once this European Standard is published in the Official Journal of the European Union (OJEU) under Directive 2014/68/EC, presumption of conformity to the Essential Safety Requirements (ESRs) of Directive 2014/68/EC is limited to technical data of materials in this European Standard and does not presume adequacy of the material to a specific item of equipment. Consequently, the assessment of the technical data stated in this material standard against the design requirements of this specific item of equipment to verify that the ESRs of the Pressure Equipment Directive are satisfied, needs to be done.Cross References:EN 10020:2000EN 10021EN 10027-1EN 10027-2EN 10052:1993EN 10058EN 10059EN 10060EN 10061EN 10079:2007EN 10168:2004EN 10204:2004EN 10221:1995EN 10308EN ISO 148-1:2010ISO 148-1:2009EN ISO 377ISO 377EN ISO 6892-1:2009ISO 6892-1:2009EN ISO 6892-2:2011ISO 6892-2:2011EN ISO 14284ISO 14284CEN/TR 102612014/68/EUEN 1011-1EN 1011-2EN 10314ISO 6303All current amendments available at time of purchase are included with the purchase of this document.