本国际标准规定了永久和临时单点锚定装置的要求、测试方法以及标记、标签和包装（如适用），专门用于连接个人防护设备（PPE），以防止从高处坠落，用于防坠落、工作定位和行程限制（工作限制）。它仅适用于符合ISO 10333-1、ISO 10333-2、ISO 10333-3和ISO 10333-5的PPE的锚定装置。注1其他类型的PPE正在制定进一步的标准:ISO 10333-6和ISO 14566（见参考书目）。锚定装置在坠落后制动悬挂、工作定位模式或约束模式下，额定承受6.0 kN的最大（动态）制动力和1.0 kN的最大（静态）载荷（假设人的质量为100 kg）。锚定器械仅供单人使用。救援人员不应与被救援人员系在同一个锚定装置上，除非锚定装置是为此目的专门设计的，并且使用说明特别允许这种应用。注2垂直刚性或柔性线路系统和水平生命线不在本国际标准的范围内，但包含在ISO 10333-4和ISO 16024中。

This International Standard specifies requirements, test methods, and marking, labelling and packaging, as appropriate,
of both permanent and temporary single-point anchor devices exclusively for the attachment of personal
protective equipment (PPE) for protection against falls from a height for fall arrest, work positioning and travel
restriction (work restraint).
It is applicable only to anchor devices for PPEs that conform to ISO 10333-1, ISO 10333-2, ISO 10333-3 and
ISO 10333-5.
NOTE 1 Further standards are in preparation for other types of PPE: ISO 10333-6 and ISO 14566 (see bibliography).
Anchor devices are rated to sustain a maximum (dynamic) arresting force of 6,0 kN, and a maximum (static) loading of
1,0 kN (assuming a person of 100 kg mass) in post-fall arrest suspension, work-positioning mode, or restraint mode.
Anchor devices are intended for single person use only. A rescuer should not attach to the same anchor device as a
person being rescued, unless the anchor device has been specifically designed for such purposes, and the instructions
for use specifically permit this application.
NOTE 2 Vertical rigid or flexible line systems and horizontal lifelines are not within the scope of this International Standard,
but are covered in ISO 10333-4 and ISO 16024.