BS EN 6041:2018规定了固化特性和玻璃的测定程序 非金属材料的转变温度（例如预浸渍和纯树脂系统， 通过差示扫描量热法（DSC）测定航空航天用粘合剂。通过该方法获得的结果可能有助于:最佳固化周期的推导（仅与其他试验方法一起，如Tg测定）树脂条件的评估树脂老化行为的评估本欧洲标准未给出满足健康和安全要求所需的任何指示 要求。本欧洲标准的使用者有责任采取适当的健康措施 以及安全预防措施。交叉引用:EN 2331EN 2743EN 2559购买本文件时可获得的所有现行修订均包含在购买本文件中。

BS EN 6041:2018 defines the procedure for the determination of the curing-characteristic and glass transition temperature of non-metallic materials (e.g. preimpregnated and neat resin systems, adhesives) for aerospace use by Differential Scanning Calorimetry (DSC).The results obtained by this method may be useful for:derivation of the optimum cure cycle (only together with other test methods e.g. Tg determination)assessment of the condition of the resinassessment of the ageing behavior of the resinThis European Standard does not give any directions necessary to meet the health and safety requirements. It is the responsibility of the user of this European Standard to adopt appropriate health and safety precautions.Cross References:EN 2331EN 2743EN 2559All current amendments available at time of purchase are included with the purchase of this document.