BS ISO 22915-5:2020-工业卡车稳定性验证-国家数字标准馆

现行 BS ISO 22915-5:2020

到馆提醒

收藏跟踪

购买正版

Industrial trucks. Verification of stability-Single-side-loading trucks 工业卡车稳定性验证

发布日期： 2020-07-15

本文件规定了用于验证可倾斜或倾斜的单侧装载卡车稳定性的试验
不可倾斜的桅杆或叉臂。
适用于装有叉臂和/或附件的卡车。购买本文件时可获得的所有当前修订均包含在购买本文件中。

This document specifies the tests to verify the stability of single-side-loading trucks with tiltable or
non-tiltable mast or fork arms.
It is applicable to trucks fitted with fork arms and/or attachments.All current amendments available at time of purchase are included with the purchase of this document.

分类信息

发布单位或类别：英国-英国标准学会

关联关系

研制信息

相似标准/计划/法规

ISO 22915-5-2020

Industrial trucks — Verification of stability — Part 5: Single-side-loading trucks
工业车辆 - 稳定性的验证 - 第5部分:单侧载货车

GB/T 26949.5-2018

工业车辆稳定性验证第5部分：侧面式叉车（单侧）
Industrial trucks—Verification of stability—Part 5:Single-side-loading trucks

KS B ISO 22915-5

산업용 트럭 — 안정도 검증 — 제5부: 한쪽 측면-적재식 트럭
单侧装载叉车第1部分:稳定性试验

KS B ISO 22915-5(2021 Confirm)

산업용 트럭 — 안정도 검증 — 제5부: 한쪽 측면-적재식 트럭
单面装载叉车第1部分:稳定性试验

KS B ISO 22915-20(2020 Confirm)

산업용 트럭－안정도 검사－제20부：사용에 의한 오프셋 하중의 특수 조건에서 트럭 작동에 대한 추가안정도 시험
工业用载重汽车稳定性的检验第20部分:在偏置负载特殊条件下工作的载重汽车附加稳定性试验

ISO 22915-20-2023

Industrial trucks — Verification of stability — Part 20: Additional stability test for trucks operating in the special condition of offset load, offset by utilization
工业卡车.稳定性验证.第20部分:在偏置负载的特殊条件下运行的卡车的附加稳定性试验

BS ISO 22915-8-2018

Industrial trucks. Verification of stability-Additional stability test for trucks operating in the special condition of stacking with mast tilted forward and load elevated
工业卡车稳定性验证

GB/T 26949.20-2016

工业车辆稳定性验证第20部分：在载荷偏置条件下作业的附加稳定性试验
Industrial trucks—Verification of stability—Part 20: Additional stability test for trucks operating in the special condition of offset load, offset by utilization

KS B ISO 22915-10(2020 Confirm)

산업용 트럭－안정도 검사－제10부：동력식 측면 스태킹의 특수 조건에서 트럭 작동에 대한 추가안정도 시험
工业货车稳定性验证第10部分:在动力装置横向移动负载的情况下在特殊条件下操作的货车的附加稳定性试验

KS B ISO 22915-8

산업용 트럭 — 안정도 검사 — 제8부:마스트가 전방으로 기울어지고 하중이 상승한 상태에서 적재되는 특수 조건에서 작동되는 트럭의 추가 안정도 시험
工业卡车 - 稳定性验证 - 第8部分:在桅杆向前倾斜和负载抬升的特殊情况下运行的卡车的附加稳定性测试

ISO 22915-10-2023

Industrial trucks — Verification of stability — Part 10: Additional stability test for trucks operating in the special condition of stacking with load laterally displaced by powered devices
工业卡车.稳定性验证.第10部分:在用动力装置横向移动负载的特殊堆垛条件下工作的卡车的附加稳定性试验

ISO 22915-8-2018

Industrial trucks — Verification of stability — Part 8: Additional stability test for trucks operating in the special condition of stacking with mast tilted forward and load elevated
工业卡车 - 稳定性验证 - 第8部分:在桅杆向前倾斜和负载抬升的特殊情况下运行的卡车的附加稳定性测试

GB/T 26949.8-2022

工业车辆稳定性验证第8部分：在门架前倾和载荷起升条件下堆垛作业的附加稳定性试验
Industrial trucks—Verification of stability—Part 8 : Additional stability test for trucks operating in the special condition of stacking with mast tilted forward and load elevated

GB/T 26949.10-2011

工业车辆稳定性验证第10部分：在由动力装置侧移载荷条件下堆垛作业的附加稳定性试验
Industrial trucks - Verification of stability - Part 10: Additional stability tests for trucks operating in the special conditions of stacking with load laterally displaced by powered devices

GB/T 26946.2-2011

侧面式叉车第2部分：搬运6m及其以上长度货运集装箱叉车的附加稳定性试验
Single side loading fork-lift trucks - Part 2: Additional stability tests for trucks handling freight containers of 6m length and above

KS B ISO 13563-2(2023 Confirm)

측면 지게차－제2부：컨테이너(6 m 이상) 작업용 지게차에 대한 추가 안정도 시험
单侧装载叉车第2部分:装卸6m及以上货运集装箱卡车的附加稳定性试验

KS B ISO 13563-2(2018 Confirm)

측면 지게차－제2부：컨테이너(6 m 이상) 작업용 지게차에 대한 추가 안정도 시험
单侧装载叉车第2部分:装卸6m及以上货物集装箱的卡车附加稳定性试验

ISO 13563-2-2001

Single side loading fork-lift trucks — Part 2: Additional stability tests for trucks handling freight containers of 6 m length and above
单面装载叉车第2部分:装卸6m及以上货物集装箱的卡车的附加稳定性试验

AS 22915.20-2018

Industrial trucks - Verification of stability, Part 20: Additional stability test for trucks operating in the special condition of offset load, offset by utilization (ISO 22915-20:2008, MOD)
工业卡车.稳定性验证第20部分:在利用率补偿的偏置负载特殊条件下运行的卡车的附加稳定性试验（ISO 22915-20-2008 MOD）

AS 22915.10-2018

Industrial trucks - Verification of stability, Part 10: Additional stability test for trucks operating in the special condition of stacking with load laterally displaced by powered devices (ISO 22915-10:2008, MOD)
工业卡车.稳定性验证第10部分:在由动力装置横向移动负载的特殊堆垛条件下运行的卡车的附加稳定性试验（ISO 22915-10-2008 MOD）

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统