现行

BS EN 12095-1997

Plastics piping systems. Brackets for rainwater piping systems. Test method for bracket strength
塑料管道系统 雨水管道系统的支架 支架强度试验方法

1997-06-15

现行

UNE-EN 12095-1997

PLASTICS PIPING SYSTEMS. BRACKETS FOR RAINWATER PIPING SYSTEMS. TEST METHOD FOR BRACKET STRENGTH.
塑料管道系统 雨水管道系统的支架 支架强度的试验方法

1997-08-06

现行

BS EN 12200-1-2016

Plastics rainwater piping systems for above ground external use. Unplasticized poly(vinyl chloride) (PVC-U)-Specifications for pipes, fittings and the system
地面外用塑料雨水管道系统 未增塑聚氯乙烯（PVC-U）

2016-06-30

现行

ISO 13951-2015

Plastics piping systems — Test method for the resistance of plastic pipe/pipe or pipe/fitting assemblies to tensile loading
塑料管道系统 - 塑料管道/管道或管道/配件组件对拉伸载荷的阻力的测试方法

2015-03-02

现行

BS ISO 13951-2015

Plastics piping systems. Test method for the resistance of plastic pipe/pipe or pipe/fitting assemblies to tensile loading
塑料管道系统 塑料管/管或管/配件组件耐拉伸载荷的试验方法

2015-03-31

现行

GOST R ISO 13951-2020

Трубопроводы из пластмасс. Метод определения стойкости узлов соединения труба/труба или труба/фитинг к растягивающей нагрузке
塑料管道系统 塑料管/管或管/配件组件对拉伸载荷的阻力的测试方法

现行

UNE-EN 12200-1-2001

Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specification for pipes, fittings and the system.
地面外用塑料雨水管道系统.未增塑聚氯乙烯（PVC-U）.第1部分:管道、配件和系统规范

2001-01-31

现行

UNE-EN 1053-1996

PLASTICS PIPING SYSTEMS. THERMOPLASTICS PIPING SYSTEMS FOR NON-PRESSURe applications. Test method for watertightness.
塑料管道系统 非压力应用的热塑性塑料管道系统 水密性试验方法

1996-05-17

现行

BS EN 17414-2-2020

District cooling pipes. Factory made flexible pipe systems-Bonded system with plastic service pipes; requirements and test methods
区域冷却管 工厂制造的软管系统

2020-08-05

现行

UNE-EN 1054-1996

PLASTICS PIPING SYSTEMS. THERMOPLASTICS PIPING SYSTEMS FOR SOIL AND WAste discharge. Test method for airtightness of joints.
塑料管道系统 土壤和废物排放用热塑性塑料管道系统 接头气密性试验方法

1996-05-17

现行

DIN 16841

Plastics piping systems - Testing of pipes and components - Determination of flexural creep of plastics by four-point loading
塑料管道系统.管道和部件的试验.用四点荷载测定塑料的弯曲蠕变

2012-08-01

现行

BS EN 15632-3-2022

District heating pipes. Factory made flexible pipe systems-Non bonded system with plastic service pipes; requirements and test methods
区域供暖管道 工厂制造的挠性管系统-带塑料服务管的非粘合系统；要求和试验方法

2022-06-17

现行

BS EN 17414-3-2020

District cooling pipes. Factory made flexible pipe systems-Non bonded system with plastic service pipes; requirements and test methods
区域冷却管 工厂制造的软管系统

2020-08-05

现行

BS PD CEN/TS 12200-2-2017

Plastics rainwater piping systems for above ground external use. Unplasticized poly(vinyl chloride) (PVC-U)-Guidance for the assessment of conformity
地面外用塑料雨水管道系统 未增塑聚氯乙烯（PVC-U）

2017-02-28

现行

UNE-EN 1638-1997

PLASTICS PIPING SYSTEMS. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) PIPES. TEST METHOD FOR THE EFFECTS OF CYCLIC INTERNAL PRESSURE.
塑料管道系统 玻璃纤维增强热固性塑料（GRP）管 循环内压影响的试验方法

1997-11-11

现行

BS EN 1638-1997

Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Test method for the effects of cyclic internal pressure
塑料管道系统 玻璃纤维增强热固性塑料（GRP）管 循环内压影响的试验方法

1997-12-15

现行

BS EN 802-1995

Plastics piping and ducting systems. Injection-moulded thermoplastics fittings for pressure piping systems. Test method for maximum deformation by crushing
塑料管道系统 压力管道系统用注射成型热塑性塑料配件 用压碎法测定最大变形的试验方法

1995-07-15

现行

DIN EN 1437

Plastics piping systems - Piping systems for underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading
塑料管道系统.地下排水和污水管道系统.耐组合温度循环和外部荷载的试验方法；德文版EN 1437:2002

2002-11-01

现行

UNE-EN 802-1995

PLASTICS PIPING AND DUCTING SYSTEMS. INJECTION-MOULDED THERMOPLASTICS FITTINGS FOR PRESSURE PIPING SYSTEMS. TEST METHOD FOR MAXIMUN DEFORMATION BY CRUSHING.
塑料管道系统 压力管道系统用注射成型热塑性塑料配件 通过压碎实现最大变形的试验方法

1995-09-18

现行

UNE-EN 1437-2003

Plastics piping systems - Piping systems for underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading.
塑料管道系统.地下排水和污水管道系统.耐组合温度循环和外部荷载的试验方法

2003-02-07