现行

GB/T 8015.1-1987

铝及铝合金阳极氧化膜厚度的试验方法 重量法
Test methods for thickness of anodic oxidation coatings on aluminium and aluminium alloys--Gravimetric method

1987-06-26

现行

JIS H 8680-1-1998

Test methods for thickness of anodic oxide coatings on aluminium and aluminium alloys -- Part1: Microscopical method
铝及铝合金阳极氧化膜厚度试验方法第1部分:显微镜法

1998-01-01

现行

GB/T 8014.2-2005

铝及铝合金阳极氧化 氧化膜厚度的测量方法 第2部分:质量损失法
Anodizing of aluminium and its alloys-The measuring method of thickness of anodic oxide coatings Part2:Mass-loss method

2005-07-04

现行

GB/T 8014.1-2005

铝及铝合金阳极氧化 氧化膜厚度的测量方法 第1部分:测量原则
Anodizing of aluminium and its alloys-The measuring method of thickness of anodic oxide coatings Part 1:The measuring principle

2005-07-04

现行

KS D 8316

알루미늄 및 알루미늄합금의 양극 산화 피막의 내식성 시험방법
铝及铝合金阳极氧化膜耐腐蚀性试验方法

2021-12-14

现行

KS D 8315(2021 Confirm)

알루미늄 및 알루미늄합금의 양극 산화 피막의 봉공도 시험 방법
铝及铝合金阳极氧化膜密封质量试验方法

1996-12-21

现行

KS D 8345(2020 Confirm)

알루미늄 및 알루미늄합금 양극 산화 피막의 사상성 시험 방법
铝和铝合金方法的阳极氧化膜的Sasangseong测试

2000-12-28

现行

KS D 8514(2023 Confirm)

알루미늄 및 알루미늄합금의 양극 산화 피막의 절연 내력 시험 방법
铝及铝合金阳极氧化层介电强度试验方法

1998-12-10

现行

KS D 8315(2016 Confirm)

알루미늄 및 알루미늄합금의 양극 산화 피막의 봉공도 시험 방법
铝和铝合金阳极氧化物涂层密封质量试验方法

1996-12-21

现行

KS D 8316

알루미늄 및 알루미늄합금의 양극 산화 피막의 내식성 시험방법
铝和铝合金阳极氧化涂层耐蚀性试验方法

2016-12-19

现行

KS D 8514(2018 Confirm)

알루미늄 및 알루미늄합금의 양극 산화 피막의 절연 내력 시험 방법
铝和铝合金阳极氧化涂层的绝缘强度测试方法

1998-12-10

现行

GB/T 8014.3-2005

铝及铝合金阳极氧化 氧化膜厚度的测量方法 第3部分:分光束显微镜法
Anodizing of aluminium and its alloys-The measuring method of thickness of anodic oxide coatings Part 3:Split-beam microscope method

2005-07-04

现行

KS D 8312(2021 Confirm)

알루미늄 및 알루미늄합금의 양극 산화 피막의 변형에 의한 균열 저항성 시험 방법
铝和铝合金阳极氧化涂层变形抗开裂的试验方法

1978-12-20

现行

KS D 8312(2016 Confirm)

알루미늄 및 알루미늄합금의 양극 산화 피막의 변형에 의한 균열 저항성 시험 방법
方法开裂性通过变形阳极氧化试验和涂层对铝铝合金

1978-12-20

现行

ISO 7599-2018

Anodizing of aluminium and its alloys — Method for specifying decorative and protective anodic oxidation coatings on aluminium
铝及其合金的阳极氧化.铝上装饰性和保护性阳极氧化涂层的规定方法

2018-01-10

现行

BS EN ISO 7599-2018

Anodizing of aluminium and its alloys. Method for specifying decorative and protective anodic oxidation coatings on aluminium
铝及其合金的阳极氧化 铝上装饰性和保护性阳极氧化涂层的规定方法

2018-02-23

现行

DIN EN 12373-3

Aluminium and aluminium alloys - Anodizing - Part 3: Determination of thickness of anodic oxidation coatings - Non-destructive measurement by split-beam microscope
铝和铝合金.阳极氧化.第3部分:阳极氧化涂层厚度的测定；分束显微镜无损检测；德文版EN 12373-3:1998

1999-04-01

现行

UNE-EN 12373-3-1999

ALUMINIUM AND ALUMINIUM ALLOYS. ANODIZING. PART 3: DETERMINATION OF THICKNESS OF ANODIC OXIDATION COATINGS -NON-DESTRUCTIVE MEASUREMENT BY SPLIT-BEAM MICROSCOPE.
铝和铝合金 阳极氧化 第3部分:阳极氧化膜厚度的测定.分光显微镜无损测量

1999-05-31

现行

UNE-EN 12373-1-2002

Aluminium and aluminium alloys. Anodizing. Part 1: Method for specifying decorative and protective anodic oxidation coatings on aluminium.
铝和铝合金 阳极氧化 第1部分:铝上装饰性和保护性阳极氧化涂层的规定方法

2002-04-16

现行

KS D ISO 2128(2016 Confirm)

알루미늄 및 알루미늄 합금의 양극산화 피막 처리－양극산화피막의 두께 측정－스플릿 빔 현미경을 이용한 비파괴 측정
铝及铝合金阳极氧化阳极氧化膜厚度的测定分光显微镜无损检测

2011-11-02