本文件列出了在PT读取器或PT对象上执行的所有测试条件，以确保受测PT器械符合ISO/IEC TS 24192-1中规定的所有要求。 本文档仅适用于PT器械: -PT读取器，其是用作基于ISO/IEC 14443的PCD非接触式读取器的非接触式票价管理系统终端(所有部件)； -PT对象，其是作为基于ISO/IEC 14443的PICC非接触对象的非接触式票价介质(所有部分)。 本文件仅适用于ISO/IEC 14443（所有部分）中描述的非接触式通信层。一旦在RF级建立了非接触式通信，就执行的应用程序到应用程序的交换超出了本文档的范围。但是，测试应用程序用于使结束-RF通信层测试期间的端到端事务。 本文件不重复ISO/IEC 14443（所有部分）或ISO/IEC 10373-？6.它参考了ISO/IEC 10373-？6适用的测试方法，规定了要使用的测试条件并描述了可以运行的附加特定测试条件。

This document lists all the test conditions to be performed on a PT reader or a PT object in order to ensure that all the requirements specified in ISO/IEC TS 24192-1 are met for the PT device under test.
This document applies to PT devices only:
- PT readers which are contactless fare management system terminals acting as a PCD contactless reader based on ISO/IEC 14443 (all parts);
- PT objects which are contactless fare media acting as a PICC contactless object based on ISO/IEC 14443 (all parts).
This document applies solely to the contactless communication layers described in ISO/IEC 14443 (all parts). Application-to-application exchanges executed once contactless communication has been established at RF level fall outside the scope of this document. However, a test application is used to make end-to-end transactions during tests on the RF communication layer.
This document does not duplicate the contents of ISO/IEC 14443 (all parts) or ISO/IEC 10373-？6. It makes reference to the ISO/IEC 10373-？6 applicable test methods, specifies the test conditions to be used and describes the additional specific test conditions that can be run.