IEC 60335-2-40:2013+A1:2016（E）涉及电热泵的安全性，包括卫生热水热泵、空调和包含电机压缩机和循环室风机盘管的除湿机，单相电器的最大额定电压不超过250 V，所有其他电器的最大额定电压不超过600 V。非供正常家庭使用但可能对公众构成危险的器具，例如供门外汉在商店、轻工业中使用的器具 和农场，都在本标准的范围内。本标准 也适用于电动热泵、空调和 含有易燃制冷剂的除湿机。易燃 制冷剂定义见3.121。上述设备 可以由一个或多个工厂制造的组件组成。如果在 多于一个组件，应使用单独的组件 一起，并且要求是基于使用匹配的 集会。本标准不考虑化学品其他 ANSI/ASHRAE 34[ISO 817]定义的A1、A2或A3组 分类。本标准规定了以下方面的特殊要求 易燃制冷剂的使用。除非涵盖规格 根据本标准，包括附件，要求 ISO 5149涵盖了制冷安全。它构成技术修订。与第四版相比，本版的主要变化如下:-3.127和3.128增加了新的定义； -5.10现在指定用于测试的制冷剂管路的长度； -7.1改变了易燃制冷剂的标记要求；-8.15增加了明确安装位置的要求 测试期间的面板； -11.2.1检测方法的澄清； -19(整个条款)全部替换； -21.2增加了新的覆盖范围，以考虑期间的振动 运输； -22.46增加了PEC的澄清； -22.118增加了室内使用机械连接器的承保范围 当使用易燃制冷剂时； -32使第1部的本条适用； -附件FF2.4计算体积（V）的修订计算； -附件FF2.5可燃物允许浓度修订版 制冷剂气体； -附件GG8增加了新的覆盖范围； -附件HH增加了资料性附件。 关键词:热泵、空调、除湿机、易燃 制冷剂 本出版物应与 IEC 60335-1:20 10。 本合并版本由第一版（2013年）组成 及其修正案1（2016）。因此，无须在 本出版物的补充。

IEC 60335-2-40:2013+A1:2016(E) deals with the safety of electric heat pumps, including sanitary hot water heat pumps, air-conditioners, and dehumidifiers incorporating motor-compressors and hydronic room fan coils, their maximum rated voltages being not more than 250 V for single phase appliances and 600 V for all other appliances. Appliances not intended for normal household use but which nevertheless may be a source of danger to the public, such asappliances intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard. This standard also applies to electric heat pumps, air conditioners and dehumidifiers containing flammable refrigerant. Flammable refrigerants are defined in 3.121. The appliances referenced above may consist of one or more factory made assemblies. If provided in more than one assembly, the separate assemblies are to be used together, and the requirements are based on the use of matched assemblies. This standard does not take into account chemicals other than group A1, A2, or A3 as defined by ANSI/ASHRAE 34 [ISO 817] classification. This standard specifies particular requirements for the use of flammable refrigerants. Unless specifications are covered by this standard, including the annexes, requirements for refrigerating safety are covered by ISO 5149. It constitutes a technical revision. The principal changes in this edition as compared with the fourth edition are as follows:
- 3.127 and 3.128 added new definitions;
- 5.10 length of refrigerant lines now specified for testing;
- 7.1 changed marking requirements for flammable refrigerants;
- 8.15 added requirement to clarify the placement of installation panels during testing;
- 11.2.1 clarification of test procedure;
- 19 (whole clause) replaced in its entirety;
- 21.2 added new coverage for vibration considerations during transport;
- 22.46 added clarification for PEC;
- 22.118 added coverage for use of mechanical connectors indoors when employing flammable refrigerants;
- 32 made this section of Part 1 applicable;
- Annex FF2.4 revised calculation for calculating volume (V);
- Annex FF2.5 revision of allowable concentration of flammable refrigerant gas;
- Annex GG8 new coverage added;
- Annex HH added informative annex. Key words: heat pumps, air-conditioners, dehumidifiers, flammable refrigerant

This publication is to be read in conjunction with IEC 60335-1:2010. This consolidated version consists of the first edition (2013) and its amendment 1 (2016). Therefore, no need to order amendment in addition to this publication.