ISO 13477:2008-流体输送用热塑性塑料管——抗快速裂纹扩展（RCP）的测定——小规模稳态试验（S4试验） -国家数字标准馆

现行 ISO 13477:2008

到馆阅读

收藏跟踪

购买正版

Thermoplastics pipes for the conveyance of fluids — Determination of resistance to rapid crack propagation (RCP) — Small-scale steady-state test (S4 test) 流体输送用热塑性塑料管——抗快速裂纹扩展（RCP）的测定——小规模稳态试验（S4试验）

发布日期： 2008-03-20

ISO 13477:2008规定了一种小规模（S4）试验方法，用于确定在规定温度和内部压力下热塑性塑料管中裂纹的止裂或扩展。
ISO 13477:2008适用于气体或液体供应用热塑性塑料管道的性能评估。在后一种情况下，管道中也可能存在空气。

ISO 13477:2008 specifies a small-scale (S4) test method for determining the arrest or propagation of a crack initiated in a thermoplastics pipe at a specified temperature and internal pressure.
ISO 13477:2008 is applicable to the assessment of the performance of thermoplastics pipes intended for the supply of gases or liquids. In the latter case, air can also be present in the pipe.

分类信息

发布单位或类别：国际组织-国际标准化组织

ICS分类： 23.040.20管道部件和管道 - 塑料管

关联关系

研制信息

归口单位： ISO/TC 138/SC 5

相似标准/计划/法规

流体输送用热塑性塑料管道系统耐内压性能的测定
Thermoplastics piping systems for the conveyance of fluids—Determination of the resistance to internal pressure

BS ISO 11922-1-2018

Thermoplastics pipes for the conveyance of fluids. Dimensions and tolerances-Metric series
流体输送用热塑性塑料管尺寸和公差

BS ISO 11922-2-1997

Thermoplastics pipes for the conveyance of fluids. Dimensions and tolerances-Inch-based series
流体输送用热塑性塑料管尺寸和公差基于英寸的系列

流体输送用热塑性塑料管材公称外径和公称压力
Thermoplastics pipes for the conveyance of fluids - Nominal outside diameters and nominal pressures

BS EN ISO 1167-3-2007

Thermoplastics pipes, fittings and assemblies for the conveyance of fluids. Determination of the resistance to internal pressure-Preparation of components
流体输送用热塑性塑料管、配件和组件内压阻力的测定

BS EN ISO 1167-4-2007

Thermoplastics pipes, fittings and assemblies for the conveyance of fluids. Determination of the resistance to internal pressure-Preparation of assemblies
流体输送用热塑性塑料管、配件和组件内压阻力的测定

BS EN ISO 1167-1-2006

Thermoplastics pipes, fittings and assemblies for the conveyance of fluids. Determination of the resistance to internal pressure-General method
流体输送用热塑性塑料管、配件和组件内压阻力的测定一般方法

BS EN ISO 1167-2-2006

Thermoplastics pipes, fittings and assemblies for the conveyance of fluids. Determination of the resistance to internal pressure-Preparation of pipe test pieces
流体输送用热塑性塑料管、配件和组件内压阻力的测定管道试件的制备

ISO 11922-1-2018

Thermoplastics pipes for the conveyance of fluids — Dimensions and tolerances — Part 1: Metric series
运输流体的热塑性塑料管道尺寸和公差第1部分:公制系列

KS M ISO 11922-1

유체 이송용 열가소성 플라스틱 관 — 치수 및 허용차 — 제1부: 미터법
流体输送用热塑性塑料管.尺寸和公差.第1部分:米制系列

GB/T 42952.1-2023

流体输送用热塑性塑料管材尺寸和公差第1部分：公制系列
Thermoplastics pipes for the conveyance of fluids—Dimensions and tolerances—Part 1:Metric series

BS PD ISO/TS 16479-2012

Thermoplastics pipes for the conveyance of fluids. Determination of the slow cracking resistance of pipes and fittings using the Notched Ring Test (NRT)
流体输送用热塑性塑料管用缺口环试验（NRT）测定管道和配件的耐慢速开裂性

ISO/TS 16479-2012

Thermoplastics pipes for the conveyance of fluids — Determination of the slow cracking resistance of pipes and fittings using the Notched Ring Test (NRT)
流体输送用热塑性塑料管——用缺口环试验（NRT）测定管道和管件的耐缓慢开裂性

KS M ISO 1167-2(2019 Confirm)

유체이송용 열가소성 플라스틱관, 이음관 및 조립품 — 내압저항성의 평가 — 제2부: 관 시험편 제작
用于输送流体的热塑性塑料管道配件和组件 - 耐内压的测定 - 第2部分:管道试件的制备

GOST ISO 1167-2-2013

Трубы, соединительные детали и узлы соединений из термопластов для транспортирования жидких и газообразных сред. Определение стойкости к внутреннему давлению. Часть 2. Подготовка образцов труб
用于运输流体的热塑性塑料管道配件和组件测定内压耐受性第二部分管件试件的制备

ISO 1167-2-2006

Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 2: Preparation of pipe test pieces
流体输送用热塑性塑料管、配件和组件——耐内压性的测定第2部分:管道试件的制备

ISO 11922-2-1997

Thermoplastics pipes for the conveyance of fluids — Dimensions and tolerances — Part 2: Inch-based series
流体输送用热塑性塑料管——尺寸和公差Spart 2:英制系列

BS EN ISO 13478-2007

Thermoplastics pipes for the conveyance of fluids. Determination of resistance to rapid crack propagation (RCP). Full-scale test (FST)
流体输送用热塑性塑料管测定抗快速裂纹扩展（RCP）能力全尺寸试验（FST）

KS M ISO 13478(2018 Confirm)

유체이송용 열가소성 플라스틱 관 — 급속균열성장(RCP)의 측정 — 전규모 시험(FST)
用于输送流体的热塑性塑料管 - 快速裂纹传播（rcp）的电阻测定 - 全尺寸测试 - （fst）

ISO 1167-3-2007

Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 3: Preparation of components
流体输送用热塑性塑料管、配件和组件——耐内压性的测定第3部分:部件的制备

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统