首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 BS PD CEN/TR 1591-2:2020
到馆提醒
收藏跟踪
购买正版
Flanges and their joints. Design rules for gasketed circular flange connections-Gasket parameters 法兰及其接头 带垫圈的圆形法兰连接的设计规则
发布日期: 2020-04-14
本文件详细说明了初步计算期间EN 1591-1中使用的通用垫片参数 在此期间,将决定应用中使用的垫片类型。一旦垫圈类型 已从不同的潜在商业供应商处确定了该类型垫片的参数 应在进一步的计算中使用,因为在垫圈类型中,根据 供应商。警告:对于使用EN 1591-1中给出的方法进行的最终计算,读者应根据预期垫片获得所选通用类型垫片的垫片参数 制造商这是因为通用垫片类型的数据因制造商而异。这 在本文件中包含的数据表中可以看到变化。交叉引用:EN 13555EN 1591-1购买时可用的所有现行修订均包含在本文件的购买中。
This document details generic gasket parameters for use in EN 1591-1 during preliminary calculations during which the type of gasket to be used in an application is to be decided. Once the gasket type has been decided the parameters for gaskets of that type from the different potential commercial suppliers should be used in further calculations as within a gasket type there will be differences depending upon the supplier.WARNING —For the final calculations using the method given in EN 1591-1 the reader is directed to obtain gasket parameters for the selected generic type of gasket from the intended gasket manufacturer. This is because the data for a generic gasket type will vary between manufacturers. This variation can be seen in the tables of data which are embodied in this document.Cross References:EN 13555EN 1591-1All current amendments available at time of purchase are included with the purchase of this document.
分类信息
发布单位或类别: 英国-英国标准学会
关联关系
研制信息
相似标准/计划/法规
现行
BS EN 1591-1-2013
Flanges and their joints. Design rules for gasketed circular flange connections-Calculation
法兰及其接头 带垫圈的圆形法兰连接的设计规则
2013-12-31
现行
DIN EN 1591-2
Flanges and their joints - Design rules for gasketed circular flange connections - Part 2: Gasket parameters
法兰及其接头.带垫圈的圆形法兰连接的设计规则.第2部分:垫圈参数;德文版EN 1591-2:2008
2008-09-01
现行
UNE-EN 1591-2-2010
Flanges and their joints - Design rules for gasketed circular flange connections - Part 2: Gasket parameters
法兰及其接头.带垫圈的圆形法兰连接的设计规则.第2部分:垫圈参数
2010-06-23
现行
BS PD CEN/TR 1591-5-2012
Flanges and their joints. Design rules for gasketed circular flange connections-Calculation method for full face gasketed joints
法兰及其接头 垫圈圆形法兰连接的设计规则 全端面密封接头的计算方法
2012-02-29
现行
BS EN 13555-2021
Flanges and their joints. Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections
法兰及其接头 与垫圈圆形法兰连接设计规则相关的垫圈参数和试验程序
2021-02-15
现行
UNE-EN 13555-2005
Flanges and their joints - Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections.
法兰及其接头.与带垫圈的圆形法兰连接的设计规则有关的垫圈参数和试验程序
2005-06-22
现行
UNE-EN 1591-1-2002+A1-2009
Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation method
法兰及其连接件.带垫圈的圆形法兰连接件的设计规则.第1部分:计算方法
2009-11-25
现行
BS DD CEN/TS 1591-3-2007
Flanges and their joints. Design rules for gasketed circular flange connections-Calculation method for metal to metal contact type flanged joint
法兰及其接头 垫圈圆形法兰连接的设计规则 金属对金属接触式法兰接头的计算方法
2007-09-28
现行
DIN V ENV 1591-2
Flanges and their joints - Design rules for gasketed circular flange connections - Part 2: Gasket parameters; German version ENV 1591-2:2001
法兰及其接头.带垫圈的圆形法兰连接的设计规则.第2部分:垫圈参数;德文版ENV 1591-2:2001
2001-10-01
现行
BS 04/30121918 DC
EN 1591-3. Flanges and their joints. Design rules for gasketed circular flange connections. Part 3. Calculation method for metal to metal contact type flanged joint
EN 1591-3 法兰及其接头 垫圈圆形法兰连接的设计规则 第三部分 金属对金属接触式法兰接头的计算方法
2004-09-02
现行
DIN CEN/TR 1591-5
Flanges and their joints - Design rules for gasketed circular flange connections - Part 5: Calculation method for full face gasketed joints; German version CEN/TR 1591-5:2012
法兰及其连接件.带垫圈的圆形法兰连接件的设计规则.第5部分:全表面带垫圈连接件的计算方法;德文版CEN/TR 1591-5:2012
2012-05-01
现行
DIN CEN/TS 1591-3
Flanges and their joints - Design rules for gasketed circular flange connections - Part 3: Calculation method for metal to metal contact type flanged joint; German version CEN/TS 1591-3:2007
法兰及其连接件.带垫圈的圆形法兰连接件的设计规则.第3部分:金属对金属接触式法兰连接件的计算方法;德文版CEN/TS 1591-3:2007
2007-10-01
现行
UNE-CEN/TS 1591-4-2010 IN
Flanges and their joints - Design rules for gasketed circular flange connections - Part 4: Qualification of personnel competency in the assembly of bolted joints fitted to equipment subject to the Pressure Equipment Directive
法兰及其连接件.带垫圈的圆形法兰连接件的设计规则.第4部分:装配在符合压力设备指令的设备上的螺栓连接件的人员能力鉴定
2010-01-05
现行
BS 11/30234814 DC
BS EN 1591-4. Flanges and their joints. Design rules for gasketed circular flange connections. Part 4. Qualification of personnel competency in the assembly of bolted joints fitted to equipment subject to the Pressure Equipment Directive
英国标准EN 1591-4 法兰及其接头 垫圈圆形法兰连接的设计规则 第四部分 根据压力设备指令 对安装在设备上的螺栓接头组装人员进行资格鉴定
2011-11-10
现行
DIN CEN/TS 1591-4
Flanges and their joints - Design rules for gasketed circular flange connections - Part 4: Qualification of personnel competency in the assembly of bolted joints fitted to equipment subject to the Pressure Equipment Directive; German version CEN/TS 1591-4:2007
法兰及其连接件.带垫圈的圆形法兰连接件的设计规则.第4部分:装配在符合压力设备指令的设备上的螺栓连接件的人员能力鉴定;德文版CEN/TS 1591-4:2007
2007-10-01