IEC 60092-353:2024作为IEC 60092-353:2024 RLV提供，其中包含国际标准及其红线版本，显示了与上一版本相比技术内容的所有变化。IEC 60092-353:2024适用于船舶和海上非径向现场电力电缆，采用挤压固体绝缘，额定电压为0,6/1(1,2)kV或1,8/3(3,6)kV，用于固定安装。包括设计用于在火灾期间保持电路完整性的电缆。各种类型的电力电缆在5.1中给出。除非本文件中另有规定，否则结构要求和试验方法与IEC 60092-350中规定的一致。 本文件的目的是: -根据IEC 60092的要求，使电缆的安全性和可靠性得到保证-352或IEC 61892-4， -制定直接或间接影响安全的此类电缆的标准制造要求和特性，以及 -规定检查是否符合这些要求的试验方法。 这第四版取消并取代了2011年出版的第三版。本版构成技术修订版。 与上一版相比，此版本包括以下重大技术变更: a)更新了IEC 60092-350关于一般构造和测试方法的参考文献，以及IEC 60092-360关于绝缘和覆层材料的参考文献。 b)增加了第5.10款:特殊应用的构造。 c)增加了表9:安装在有爆炸性环境和无爆炸性环境区域之间的电缆的附加测试。 d)从表7中删除了测试要求IEC 60331-21。 e）删除了以前的附件A（0.6/1 kV的替代增强绝缘厚度）。

IEC 60092-353:2024 is available as IEC 60092-353:2024 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.

IEC 60092-353:2024 is applicable to shipboard and offshore non radial field power cables with extruded solid insulation, having a voltage rating of 0,6/1 (1,2) kV or 1,8/3 (3,6) kV intended for fixed installations. Cables designed to maintain circuit integrity during a fire are included. The various types of power cables are given in 5.1. The constructional requirements and test methods are aligned with those indicated in IEC 60092-350, unless otherwise specified in this document.
The object of this document is:
- to standardize cables whose safety and reliability is ensured when they are installed in accordance with the requirements of IEC 60092-352 or IEC 61892-4,
- to lay down standard manufacturing requirements and characteristics of such cables directly or indirectly bearing on safety, and
- to specify test methods for checking conformity with those requirements.
This fourth edition cancels and replaces the third edition published in 2011. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) Updated references to IEC 60092-350 for general construction and test methods and IEC 60092-360 for insulating and sheathing materials.
b) Added subclause 5.10: Construction for special applications.
c) Added Table 9: Additional test for cables for installation between areas with and without explosive atmospheres.
d) Deleted the test requirement IEC 60331-21 from Table 7.
e) Deleted the former Annex A (Alternative enhanced insulation thickness for 0,6/1 kV).