Printed board assemblies - Part 3: Sectional specification - Requirements for through-hole mount soldered assemblies
印刷电路板组件 - 第3部分:分段规格 - 通孔安装焊接组件的要求

2017-05-30

인쇄회로기판 조립품 —제3부: 품목규격 — 스루홀 실장 솔더링 조립품에 대한 요구사항
印制板组件第3部分:分规范通孔安装焊接组件的要求

2021-12-02

Печатные узлы. Часть 3. Монтаж в сквозные отверстия. Технические требования
印刷板组件 第三部分 通孔安装焊接组件的要求

印制板组装 第3部分:分规范 通孔安装焊接组装的要求
Printed board assemblies--Part 3:Sectional specification--Requirements for through-hole mount soldered assemblies

2003-11-24

Printed board assemblies-Sectional specification. Requirements for terminal soldered assemblies
印制板组件

2017-11-20

인쇄기판조립품－제4부：품종 규격－단자가 납땜된 조립품에 대한 요구사항
印制板组件第4部分:分规范终端焊接组件要求

2007-11-29

Printed board assemblies - Part 4: Sectional specification - Requirements for terminal soldered assemblies
印刷电路板组件 - 第4部分:部分规格 - 终端焊接组件的要求

2017-07-26

인쇄기판조립품－제4부：품종 규격－단자가 납땜된 조립품에 대한 요구사항
印制板组件第4部分:分规范端子焊接组件的要求

2007-11-29

印制板组装 第4部分:分规范 引出端焊接组装的要求
Printed board assemblies--Part 4:Sectional specification--Requirements for terminal soldered assemblies

2003-11-24

Printed board assemblies-Sectional specification. Requirements for surface mount soldered assemblies
印制板组件

2019-10-07

Printed board assemblies - Part 2: Sectional specification - Requirements for surface mount soldered assemblies
印刷电路板组件 - 第2部分:分段规格 - 表面安装焊接组件的要求

2017-05-23

인쇄기판 조립품－제2부：품종규격：표면실장 납땜 조립품에 대한 요구사항
印制板组件第2部分:分规范表面安装焊接组件的要求

2006-12-18

인쇄회로기판 조립품 —제2부: 품목규격 — 표면실장 솔더링 조립품에 대한 요구사항
印制板组件第2部分:分规范表面安装焊接组件的要求

2021-12-02

印制板组装 第2部分: 分规范 表面安装焊接组装的要求
Printed board assemblies--Part 2: Sectional specification--Requirements for surface mount solderedassemblies

2003-07-02

Printed board assemblies-Sectional specification. Requirements for through-hole mount soldered assemblies
印制板组件

2017-09-25

IEC 2326-3. Printed boards. Part 3. Rigid single and double sided printed boards with interlayer connections. Sectional specification. 52/676/CD
IEC 2326-3 印制板 第三部分 带有夹层连接的刚性单面和双面印制板 分规范 52/676/CD

1996-10-15

Materials for printed boards and other interconnecting structures – Part 6-3: Sectional specification set for reinforcement materials - Specification for finished fabric woven from “E” glass for printed boards
印制板和其他互连结构用材料.第6-3部分:增强材料分规范集.印制板用“E”玻璃编织成品织物规范

2023-06-14

Materials for printed boards and other interconnecting structures - Part 3-3: Sectional specification set for unreinforced base materials, clad and unclad (intended for flexible printed boards) - Adhesive coated flexible polyester film
印制板和其他互连结构用材料.第3-3部分:包覆和非包覆（柔性印制板用）无增强基材的分规范集.涂粘合剂的柔性聚酯薄膜

1999-02-10

Materials for printed boards and other interconnecting structures -- Part 3-3: Sectional specification set for unreinforced base materials, clad and unclad (intended for flexible printed boards) - Adhesive coated flexible polyester film.
印制板和其他互连结构用材料第3-3部分:覆层和非覆层（用于柔性印制板）非增强基材分规范集涂有粘合剂的柔性聚酯薄膜

2000-12-04

IEC 1188-5-3. Design and use of printed boards and printed board assemblies. Part 5. Sectional design and use requirements. Attachment (land/joint) considerations. Section 3. Components with gull-wing leads on two sides 52/574/CD. Components with Gull-wing leads on two sides
IEC 1188-5-3 印制板和印制板组件的设计和使用 第五部分 分段设计和使用要求 附件（土地/联合）注意事项 第三节 两侧带有鸥翼引线的部件52/574/CD 两侧带有鸥翼引线的部件

1995-07-12