1.1 本规程涵盖了在含金属矿石、精矿和相关冶金材料的火试金期间，银损失校正、利用炉渣回收和合格银的杯化。 1.2 单位- 以国际单位制表示的数值应视为标准值。本标准不包括其他计量单位。 1.3 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 （见实践） E50 和ISO 35:2006.) 1.4 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。 ====意义和用途====== 5.1 本规程主要用于校正火试金过程中的银损失。银含量通过火试金测定，以便于买卖双方进行冶金交换。假设所有使用这种做法的人都是训练有素的分析员，能够熟练、安全地执行任务。预计工作将在适当的质量控制实践（如指南中所述）下，在配备适当的实验室中进行 E882 .

1.1 This practice covers the silver loss correction, utilizing slag recycling and cupellation of proof silver during the fire assay of metal bearing ores, concentrates, and related metallurgical materials. 1.2 Units— The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. (See Practices E50 and ISO 35:2006.) 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 5.1 This practice is primarily intended to be used for the correction of silver loss in the fire assay process. Silver contents are determined by fire assay for the purpose of metallurgical exchange between buyer and seller. It is assumed that all who use this practice will be trained analysts capable of performing skillfully and safely. It is expected that work will be performed in a properly equipped laboratory under appropriate quality control practices such as those described in Guide E882 .