BS EN 15316-1:2017是计算能源使用和能源消耗的一般框架 供暖和生活热水系统的性能。这个标准只涉及热量， 由水基系统提供，用于加热、生活热水和冷却（例如吸收 冷却装置）。它指定了如何使用计算模块执行整个安装的计算（请参见 表2）对应于各标准中定义的方法。它处理操作条件计算和能源性能指标等常见问题。它将输入和输出标准化，以实现通用的欧洲计算方法。它允许对供暖和生活热水系统及子系统进行能量分析，包括 通过比较系统损耗和定义 能源绩效指标。性能分析允许在系统和子系统之间进行比较，并使 可以评估每个子系统对建筑物能源性能的影响。加热子系统各部分的系统损失计算见下文 标准。本标准不包括通风系统（例如，具有热回收功能的平衡系统），但如果 空气被预热或安装了空气加热系统，这些系统为空气处理机组提供热量 （空气处理装置）包含在本标准中。表2显示了本标准在环境保护局标准中的相对位置 EN ISO 52000-1中规定的模块化结构。注1:在CEN ISO/TR 52000-2中，可以找到相同的表格，每个模块的 已发布或正在编制的相关EPB标准和随附技术报告。注2:模块代表EPB标准，尽管一个EPB标准可能涵盖多个模块，一个模块可能涵盖多个EPB标准，例如简化方法和详细方法。另见第2条和表A.1和B.1。交叉引用:EN ISO 7345:1995ISO 7345:1987ENISO 52000-1ISO 52000-1:2017EN 15316-3:2017购买本文件时可用的所有当前修订版均包含在购买本文件中。

BS EN 15316-1:2017 is the general frame for the calculation of the energy use and the energy performance of heating and domestic hot water systems. This standards is only dealing with the heat, provided by water based systems, needed for heating, domestic hot water and cooling (e.g. absorption chiller).It specifies how to perform the calculation of the entire installation using the calculation modules (see Table 2) corresponding to the methods defined in the respective standards.It deals with common issues like operating conditions calculation and energy performance indicators.It standardises the inputs and outputs in order to achieve a common European calculation method.It allows the energy analysis of the heating and Domestic hot water systems and sub-systems including control (emission, distribution, storage, generation) by comparing the system losses and by defining energy performance indicators.The performance analysis allows the comparison between systems and sub-systems and makes possible to evaluate the impact of each sub-system on the energy performance of a building.The calculation of the system losses of each part of the heating sub-systems is defined in subsequent standards.Ventilation systems are not included in this standard (e.g. balanced systems with heat recovery), but if the air is preheated or an air heating system is installed, the systems providing the heat to the AHU (Air Handling Unit) are covered by this standard.Table 2 shows the relative position of this standard within the set of EPB standards in the context of the modular structure as set out in EN ISO 52000-1.NOTE 1 In CEN ISO/TR 52000-2 the same table can be found, with, for each module, the numbers of the relevant EPB standards and accompanying technical reports that are published or in preparation.NOTE 2 The modules represent EPB standards, although one EPB standard may cover more than one module and one module may be covered by more than one EPB standard, for instance a simplified and a detailed method respectively. See also Clause 2 and Tables A.1 and B.1.Cross References:EN ISO 7345:1995ISO 7345:1987ENISO 52000-1ISO 52000-1:2017EN 15316-3:2017All current amendments available at time of purchase are included with the purchase of this document.