ISO 8283-3:1992-塑料管道和配件——建筑物内排放系统的插座和插口尺寸第3部分:聚丙烯（PP） -国家数字标准馆

现行 ISO 8283-3:1992

到馆阅读

收藏跟踪

购买正版

Plastics pipes and fittings — Dimensions of sockets and spigots for discharge systems inside buildings — Part 3: Polypropylene (PP) 塑料管道和配件——建筑物内排放系统的插座和插口尺寸第3部分:聚丙烯（PP）

发布日期： 1992-12-03

规定了用于建筑物内排水系统的PP管接头和整体式接头的插座和插口的设计公式、导出尺寸以及公差，此类接头用于容纳膨胀和收缩。

Specifies the design formulae and the derived dimensions, together with tolerances, of sockets and spigots for joints and for integral sockets of PP pipes intended for use in discharge systems inside buildings where such joints are intended to accommodate expansion and contraction.

分类信息

发布单位或类别：国际组织-国际标准化组织

ICS分类： 23.040.45管道部件和管道 - 塑料配件、 23.040.20管道部件和管道 - 塑料管、 91.140.80建筑物中的设施 - 排水系统

关联关系

研制信息

归口单位： ISO/TC 138/SC 1

相似标准/计划/法规

ISO 8283-2-1992

Plastics pipes and fittings — Dimensions of sockets and spigots for discharge systems inside buildings — Part 2: Polyethylene (PE)
塑料管道和配件——建筑物内排放系统的插座和插口尺寸第2部分:聚乙烯（PE）

ISO 8283-4-1992

Plastics pipes and fittings — Dimensions of sockets and spigots for discharge systems inside buildings — Part 4: Acrylonitrile/butadiene/styrene (ABS)
塑料管道和配件——建筑物内排放系统的插座和插口尺寸第4部分:丙烯腈/丁二烯/苯乙烯（ABS）

BS EN 1124-3-2008

Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems-System X. Dimensions
废水系统用带插口和插座的纵向焊接不锈钢管和配件

BS EN 1124-2-2014

Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems-System S, forms and dimensions
废水系统用带插口和插座的纵向焊接不锈钢管和配件系统结构、形式和尺寸

Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 3: System X - Dimensions
废水系统用带插口和套筒的纵向焊接不锈钢管和配件.第3部分:系统X.尺寸；德文版EN 1124-3:2008

UNE-EN 1124-3-2009

Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 3: System X - Dimensions
废水系统用带插口和套筒的纵向焊接不锈钢管和配件.第3部分:系统X.尺寸

UNE-EN 1124-2-2008

Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 2: System S; dimensions
废水系统用带插口和插座的纵向焊接不锈钢管和配件.第2部分:系统S；尺寸

BS 06/30158977 DC

Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems. Part 3. System X. Dimensions
废水系统用带插口和插座的纵向焊接不锈钢管和配件第三部分系统X.尺寸

BS EN 1123-2-2006+A1-2007

Pipes and fittings of longitudinally welded hot-dip galvanized steel tube with spigot and socket for waste water systems-Dimensions
废水系统用带插口和插座的纵向焊接热浸镀锌钢管和管件

Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 2: System S, forms and dimensions
废水系统用带插口和插座的纵向焊接不锈钢管和配件.第2部分:系统、形式和尺寸；德文版EN 1124-2:2014

UNE-EN 1123-2-2007+A1-2007

Pipes and fittings of longitudinally welded hot-dip galvanized steel tube with spigot and socket for waste water systems - Part 2: Dimensions
废水系统用带插口和插座的纵向焊接热浸镀锌钢管和配件.第2部分:尺寸

BS ISO 7432-2021

Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Test methods to prove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals
玻璃纤维增强热固性塑料（GRP）管道和配件用弹性密封件证明锁紧承插接头（包括双承插接头）设计的试验方法

Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods to prove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals
玻璃增强热固性塑料（GRP）管道和配件 - 用于证明锁定插座和插口接头（包括双插座接头）与弹性密封件的设计的测试方法

BS 06/30151317 DC

BS EN 1124-2. Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems. Part 2. System S. Dimensions
英国标准EN 1124-2 废水系统用带插口和插座的纵向焊接不锈钢管和配件第二部分系统S.尺寸

ISO 8283-1-1991

Plastics pipes and fittings — Dimensions of sockets and spigots for discharge systems inside buildings — Part 1: Unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly (vinyl chloride) (PVC-C)
塑料管道和配件——建筑物内排放系统的插座和插口尺寸第1部分:未增塑聚氯乙烯（PVC-U）和氯化聚氯乙烯（PVC-C）

BS EN 1123-3-2004

Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems-Dimensions and special requirements for vacuum drainage systems and for drainage systems in ship-building
废水系统用带插口和插座的纵向焊接热浸镀锌钢管和管件

Pipes and fittings of longitudinally welded hot-dip galvanized steel tube with spigot and socket for waste water systems - Part 2: Dimensions (includes Amendment A1:2007)
废水系统用带插口和插座的纵向焊接热浸镀锌钢管和配件.第2部分:尺寸；德文版EN 1123-2:2006+A1:2007

Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 3: Dimensions and special requirements for vacuum drainage systems and for drainage systems in shipbuilding
废水系统用带插口和插座的纵向焊接热浸镀锌钢管和管件.第3部分:真空排水系统和造船排水系统的尺寸和特殊要求；德文版EN 1123-3:2004

UNE-EN 1123-3-2007

Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 3: Dimensions and special requirements for vacuum drainage systems and for drainage systems in ship-building
废水系统用带插口和插座的纵向焊接热浸镀锌钢管和配件第3部分:真空排水系统和造船排水系统的尺寸和特殊要求

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统