前言:这是CSA Z316的第五版。6、锐器伤害防护——要求和试验方法——锐器容器，采用ISO（国际标准化组织）标准23907-2（第一版，2019-11），标题为锐器伤害防护——要求和试验方法——第2部分:可重复使用的锐器容器，但存在加拿大偏差。它取代了2014年作为CAN/CSA-Z316发布的上一版本。6（采用ISO 23907:2012）。本标准的制定符合加拿大标准委员会对加拿大国家标准的要求。 CSA集团已将其作为加拿大国家标准发布。范围:本文件规定了用于存放潜在危险锋利物的可重复使用锋利物容器的要求，无论是否具有锋利物保护功能，例如手术刀刀片、套管针、皮下注射针和注射器。本文件适用于由制造商完整提供的锋利物容器，以及作为拟由用户组装的部件提供的容器。不适用于一次性锋利物容器（此类容器参考ISO 23907-1）。 本文件包括用户安全、寿命模拟、清洁和去污、微生物验证、质量监控和性能测试的设计功能。

Preface:This is the fifth edition of CSA Z316.6,Sharps injury protection — Requirements and test methods — Sharps containers, which is an adoption, with Canadian deviations, of ISO (International Organization for Standardization) Standard 23907-2 (first edition, 2019-11), titledSharps injury protection — Requirements and test methods — Part 2: Reusable sharps containers. It supersedes the previous edition, published in 2014 as CAN/CSA-Z316.6 (adopted ISO 23907:2012).This Standard has been developed in compliance with Standards Council of Canada requirements for National Standards of Canada. It has been published as a National Standard of Canada by CSA Group.Scope:This document specifies requirements for reusable sharps containers intended to hold potentially hazardous sharps medical waste with or without sharps protection features, e.g. scalpel blades, trocars, hypodermic needles and syringes.This document is applicable to sharps containers that are supplied complete by the manufacturer and to those that are supplied as components intended to be assembled by the user.It is not applicable to single use sharps containers (refer to ISO 23907-1 for such containers).This document includes design functionality for user safety, lifespan simulation, cleaning and decontamination, microbiological validation, quality monitoring and performance testing.